AUKEY Black True Wireless Earbuds EP-T25 Bluetooth 5.0 IPX5 Water Resistance. Condition is “New”. Dispatched with eBay delivery – Packlink 2-3 days.

Please note: Only one side earbud working

Specifications

• Earbuds Model: EP-T25

• Technology: BT 5, A2DP, AVRCP, HFP, HSP, AAC Driver: (each channel) 1 x 6mm / 0.24” speaker driver

• Sensitivity: 90 ±3dB SPL (at 1kHz/1mW)

• Frequency Range: 20Hz – 20kHz Impedance: 16 ohm ±15%

• Microphone Type: MEMS (microphone chip) Microphone Sensitivity: -38dB ±1dB (at 1kHz)

• Microphone Frequency Range: 100Hz - 10kHz

• Charging Time: 1 hour Battery Life Up to 5 hours Battery Type Li-polymer (2 x 40mAh)

Operating Range: 10m / 33ft IP Rating IPX5 Weight 7g / 0.25oz (pair)

• AUKEY EP-T25 Wireless Earbuds User Manual

Description

【25-Hour Playtime】 The earbuds stream Hi-Fi stereo sound for up to 5 hours on a single charge. There’s an extra 20 hours in the compact charging case that is quickly recharged with USB-C.

【Powerful Bass Performance】The enhanced 6mm dynamic drivers deliver high-fidelity sound, clearer than CD-quality with richer bass.

【Package Contents】AUKEY EP-T25 True Wireless Earbuds*1, Charging Case*1, Ear-Tips (S/M/L), USB-C Cable*1, User Manual*1, Quick Start Guide*1

The tiny earbuds deliver surprisingly accurate sound to immerse you in your music. Improved calls clarity in busy or windy places.

Triple-tap either earbud to access your phone's assistant.A responsive, touch-sensitive panel on each earbud allows easy music control and calls management. The super compact charging case keeps your earbuds safe and packs 4 additional charges.

Turning On / Off

Turn On Open the lid of the charging case or touch and hold the touch-sensitive panels on both earbuds for 4 seconds when they are turned of

Turn Off Close the lid of the charging case or touch and hold the touch-sensitive panels on both earbuds for 6 seconds when they are turned on

Pairing

Starting with the earbuds in the case:

• Open the lid of the charging case. Both earbuds will turn on automatically and connect with each other

• Turn on the pairing function on the device you want to pair with the earbuds

• From the list of available devices, find and select “AUKEY EP-T25” If a code or PIN is required for pairing, enter “0000”

Regular Use After Pairing Once the earbuds are successfully paired with your device, they can be switched on and off as follows:

• Open the lid of the charging case, then both earbuds will turn on and

• connect with each other automatically

• To power off, put the earbuds back in the charging case and close the lid,

• and they will begin charging.

Using the Left/Right Earbud Only

• Starting with the earbuds in the case: Take the left/right earbud out

• Turn on the pairing function on the device you want to pair with the earbud

• From the list of available devices, find and select “AUKEY EP-T25”

Notes

• When you turn on the earbuds, they will automatically reconnect to the

• last-paired device or enter pairing mode if no paired device is found

• To clear the pairing list, touch and hold the touch-sensitive panels on both earbuds for 10 seconds after

• powering off both earbuds

• In pairing mode, the earbuds will automatically turn off after 2 minutes if no devices are paired

• If one of the earbuds has no sound output, put both earbuds back into the charging case and take them out again

• The wireless operating range is 10m (33ft). If you exceed this range, the earbuds will disconnect from your paired device. The connection will be re-established if you re-enter the wireless range within 2 minutes. The earbuds will automatically reconnect to the last-paired device. To connect with other devices, repeat the previous pairing step