Closed Column Pressure Extractor (Comes with 1 yr. Limited warranty, excludes gaskets and screens)
This system allows the user to build up solvent pressure by closing the valve, pulling a vacuum and filling the extractor, Extractor will fill about 85% with solvent before the internal pressure will equal the pressure of the can propellant.
The solvent can will fit into either port with a tip adapter supplied with some butane cans, tip adapter required, not included
Solvent Soak is expected to be between 30-90 min, but this all depends on material, starting with frozen cans of solvent is recommended
This system allows the user to soak the material before opening the bottom valve to release the solvent and oil.

Description:

    • Traditional Open Blast Extractor. All parts made from 304 Stainless Steel.
    • Complete safety at low temperature and high pressure.
    • The solvent can will fit into the top cap hole.
    • Vacuum clamps at all interfaces make for easy clean. High Polish Interior.
    • Gaskets are designed for Oil Processing. Temp range (-20…+200)℃.
    • Tubes Hold either 90g (3 oz) of dry material (Approximately).
  •  
  • Products support customization, accessories, capacity, styles, etc., please leave a message to tell us what you want! ! !

Product list: 

    • Stainless Steel Tripod (200mm*100)mmx 1
    • Stainless steel Ball Valve, Full Port FNPT, SS304. X 2
    • Sacuum tube X 1
    • Single Pin Clamp X 1
    • Tri-Clamp Viton Screen gasket with stainless steel (150 microns) X 2
    • Tri-Clamp Viton gasket X2
 

Extractor de presión de columna cerrada (viene con 1 año de garantía limitada, no incluye juntas ni filtros)
Este sistema permite al usuario aumentar la presión del solvente cerrando la válvula, haciendo vacío y llenando el extractor. El extractor se llenará con un 85 % de solvente antes de que la presión interna iguale la presión del propulsor de la lata.
La lata de disolvente encajará en cualquiera de los puertos con un adaptador de punta suministrado con algunas latas de butano, se requiere adaptador de punta, no incluido
Se espera que el remojo en solvente dure entre 30 y 90 minutos, pero todo depende del material, se recomienda comenzar con latas congeladas de solvente.
Este sistema permite al usuario empapar el material antes de abrir la válvula inferior para liberar el solvente y el aceite.

Descripción:

  • Extractor tradicional a chorro abierto. Todas las piezas están hechas de acero inoxidable 304.
  • Seguridad total a baja temperatura y alta presión.
  • La lata de solvente encajará en el orificio de la tapa superior.
  • Las abrazaderas de vacío en todas las interfaces facilitan la limpieza. Interior de alto pulido.
  • Las juntas están diseñadas para el procesamiento de petróleo. Rango de temperatura (-20…+200)℃.
  • Los tubos contienen 90g (3 oz) de material seco (aproximadamente).


Los productos admiten personalización, accesorios, capacidad, estilos, etc. ¡Deje un mensaje para decirnos lo que quiere! ! !

Lista de productos:

  1. Trípode de acero inoxidable (200 mm * 100) mmx 1
  2. Válvula de bola de acero inoxidable, paso completo FNPT, SS304. 2x2
  3. Tubo de vacío X 1
  4. Abrazadera de un solo pin X 1
  5. Junta de pantalla Tri-Clamp Viton con acero inoxidable (150 micras) X 2
  6. Junta Tri-Clamp Viton X2
  • Payment should be completed within 4 (Four) days of auction closing. Or unpaid dispute will be filed for closing auction.
  • We will leave a positive feedback immediately after payment is received. We appreciate a positive feedback as much as you do. If for some reason there is any issue with the purchase, please contact us prior to leaving feedback, we will be glad to work together and provide a satisfying solution.
  • We only ship the item to the eBay Verified address that is sent to us at the time of checkout, most shipment will be shipped within 1-5 business day. Please verify the correct shipping address in your eBay account before making your payment. Shipping time during holidays may take longer than normal. 
  • Any brokerage, customs, and duty fees associated with international shipments are the customer's responsibility and are not included in our shipping charges. 
  • If you are located outside of the continental 48 United States, please email us in advance to see if the specific item ships to your location. These orders are generally shipped within 1-5 days after payment is received. 
  • Please be patient as they are often subject to additional inspection upon delivery.
  • All of our items are backed with a 30-day return policy. We ensure all our items are new and in excellent condition prior to shipping. In case you receive the item that is not to the standards above, please contact us via e-Bay messages. All returns must be in new original condition as received and should be shipped with delivery confirmation
  • Please note that all returns must be pre-approved by us. Unauthorized returns will not be accepted. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation.
  • We ONLY accept returns with original package. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return.
  • We are a comprehensive company specializing in the research and development, production and sales of lab related equipment. Company tenet: Respect reputation and contract, provide high-quality and low-cost equipment for serve scientific research.
  • We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders.
  • Email Customer Support:
  • 9:00am-2:00am PST Sunday-Friday
  • All emails will be responded to within 12-24 hours