Product Description

Fitment:

For Ford, For GM,For Chrysler and For Jeep vehicles (please make sure the size you need before purchase)
 

Features:

(1) 7/8", 32mm, 36mm, 40mm, 47mm, 1-7/8" and 2" ( thin and new 47mm wrench tool fits Ford 6.0L and 6.4L Powerstroke Diesel Pickup ), come with a store bag, easy to keep and carry.
(2) Constructed from 1/4" thick steel, this tool set ensures high strength and durability, great resistance to corrosion and rust.
(3) Our specialty tool helps easily remove and install fan clutch when repairing the water pump or fan clutch, it fits around the clutch and the clutch will loose with a quick pull of the trigger, and then you can spin it off (Use with an air hammer).
(4) Instead of trying to grab water pump nuts with some crappy universal tool, our specialty tool helps easily and quickly remove the fan clutch. The integrated notch in each wrench helps hold everything together--A must have for any mechanic.
(5) Use with an air hammer. Does the job much faster and easier than conventional fan clutch wrenches. No holding wrenches necessary.Convenient and Saving your time and energy.
(6) 7 driving wrenches that fit Ford, GM, Chrysler & Jeep. 7/8", 32mm, 36mm, 40mm thin and 47mm size to fit Ford 6.0L and 6.4L Powerstroke diesel pickup. 1-7/8"and 2" are also included in the set.
(7) NOTE: On some GM 4.3L, 5.0L, and 5.7L equipped vehicles (if not all of them), you'll need to remove the upper half of the plastic fan shroud before you begin to remove the fan clutch .

Removal Procedure:

1.You should leave the serpentine belt on in order to loosen the fan clutch.
2.Choose the correct size wrench and place it on the fan clutch.
3.Place the straight pneumatic extension on the wrench.

Tip: If you do have an impact air hammer (pneumatic hammer), you can skip step 4, since you can now use the impact air hammer instead of a hammer and 3/8 drive socket.
4.Place the 3/8 drive deep socket on the end of the pneumatic extension.The socket is used to protect the end of the pneumatic extension from the hammer blows you'll need to give it to loosen the fan clutch.
5.With your hammer, hit the socket placed over the pneumatic extension end. The idea here is to hammer the fan clutch tool so that it will rotate the fan clutch counter-clockwise.

Package included:

1set  Pneumatic Fan Clutch Wrench