Important Notice (Effective 8/26/25):
Due to the increased costs from current international tariffs, our kits will temporarily ship without relays or trimming resistors. This adjustment helps us keep prices stable. Once market conditions improve, we plan to include them again.
For those items, you can easily order quality replacements from authorized suppliers such as Mouser or Digi-Key. In practice:
-
Trimming resistors rarely need replacement ? original parts can be cleaned with DeoxIT or similar if needed, while modern sealed types are simply an upgrade.
-
Relays are usually serviceable as-is, though the internal contacts may occasionally need burnishing if oxidation causes poor contact.
_________________________________________________
This kit restores and upgrades this deck. Wima Film Caps are used to replace all caps of 4.7uf or smaller. All other electrolytics are replaced with high quality Nichicon UKW or Panasonic FC caps.
Superior to other kit suppliers (Wima film caps sound better, transistors replacing known problematic one's) our kit will bring out the best in your deck!
Pictures show the Mother board and power supply board replacement parts, parts for all other boards are included as well. Parts are bagged by board
The kit replaces electrolytic and tant caps with high quality new ones sourced via reputable USA distributors like Digikey and Mouser. Most caps are Nichicon high quality UKL and UPW capacitors, we also sometimes use Panasonic FC caps for filtering in spots. All new caps will be the same capacitance as the originals with voltage ratings at least as high as the originals and oftentimes higher. Any capacitor of 4.7uf or lower is replaced with a high quality Wima film caps for better sound and reliability.
Transistors are also sourced the same way and almost all are highly reliable on-semi devices. Not all (not even most) transistors get replaced, just those that time and collective knowledge have shown to be either noisy, unreliable or at the edge of their operating ability.
- The individual doing the work should be competent with a soldering gun, multimeter, reading a schematic etc. I am not a tech, but I have successfully done hundreds of restorations over the last 20 years.
- Many of the parts lists for these kits were compiled when we restored units, others are sourced from the service manuals (digital download included in purchase if you don't know how to source it). We have compiled parts lists for well over 200 units for units from Marantz, Technics, Pioneer, Sansui, Harman Kardon, etc. We do not sell kits for tube gear currently.
- If the service manual is wrong (it does happen) we will ship you out the correct parts free of charge. The same is true if we make a mistake in compiling the kit ( I hope not but just in case). We want this process to go smoothly for you.
- Included is a two page instruction/guidance sheet with some helpful hints. It is not a step by step guide. But, with it, the service manual, our part number labeled parts list you will have everything you need to get the job done.
The kit will ship (usually the next day) via USPS First Class with tracking.
We have bought in bulk hoping to provide the community with an easy, time and cost effective solution. Any feedback on how to do that better is appreciated.
Thank you
________More Details____
Quality Parts
All signal path caps 4.7uf or lower are replaced by sonically superior film caps, most by Wima
All transistors are made by OnSemi
Electrolytic caps are primarily Nichicon. Panasonic, United Chem-Con and other reputable brands are also employed
Nichicon caps used are primarily from the UPW and UKL line
Panasonic caps used are primarily from the FC & FR line
Relays are primarily Omron
Trimmer are made by Bourns
All Parts Are Procured Directly through the Manufacture or via Authorized Distributors
HIghest Quality
No Counterfeit Parts
Ultimate Kits include the following*
Replacement Caps for every electrolytic or tantalum cap in the unit, including tuner sections
Unless otherwise noted, this includes any off board capacitors including the Filter and Coupling Caps
Off Board caps may be smaller in diameter than the originals, our documentation provide a few easy options for installing these
Replacement Trimmers for critical audio adjustments like bias and dc offset (where applicable in amplifiers and receivers). Other Kit supplier do not include these.
Replacement Relay where applicable
*Not all units use a relay, not all vintage relays have a modern replacement, and finally not all vintage relays can be ascertained from available data
Kits are priced accordingly, you can view our parts list to see if your kit includes the relay(s).
Replacement Transistors and diodes for those we now know were problematic
Included Documentation (PDF format)
Our Parts List (separated by board and part type - easy to comprehend)
The Service Manual (or at least the schematic if we can't locate the full service manual
Our exclusive and extensive Hints & Instructions Document
The Owner's Manual (if available)
The Kit
Parts are separated and bagged by board
Shipped promptly in quality boxes
Documentation links are sent via message, email and included in the kit
Need a Kit for Something Not Yet Listed?
Have Questions?
Contact us