Unitas 429 and 429N Swiss pocket watch parts.

New old stock vintage Swiss made parts.

Some are in the original sealed containers and others are loose packaged. All of the parts are unused.

Select the part number you need from the drop down list above.

Please note I laid out more than one of each part in most pics, but you only get one piece per purchase unless otherwise noted in the pics.

The screws are sold as noted in the pics.

The plate screws come in a long and short version. You get three of each for a total of 6 pieces.

The case screws come in pairs.

All of the escape wheels are 8.50mm diameter

Please also be sure you look at the parts carefully before you purchase. There were several versions of the caliber 429 and as you can see from the stems and crown wheels and they are different.

I'll list the parts below that are available in this listing.

#182 barrel with cover

#195 barrel arbor

#201 center wheel

#224 fourth wheel for mvts with seconds at 6 position

#301 regulator

#250 hour wheel 2.30mm height

#260 minute wheel

#401 negative stem

#401 threaded stem

#407 clutch wheel(sliding pinion)

#410 winding pinion

#420/422 crown wheel w/ring(one piece style)

#420/423 crown wheel w/core(two piece style)

#425 click w/spring

#435 clutch lever(yoke)

#443/5443 set lever w/screw

#450/453 setting wheels(large and small sold as a pair)

#702 escape wheel 8.50mm(two conical pivots)

#704 escape wheel 8.50mm(upper conical pivot, lower straight pivot)

#705 escape wheel 8.50mm(two straight pivots)

#710 pallet fork

#5101 case screw, polished head(sold in pairs)

#5105/110/121 plate screw, long and short version(sold in sets of 6 pcs, 3 long, 3 short)

Please ask any questions before you buy!

Thank you for looking!