Jotun Pilot ACR

One component physically drying acrylic coating | 190 colours

Direct to metal, very fast drying
For use as topcoat in atmospheric environments
Can be applied at sub zero surface temperatures
Certified not to spread surface flames
Marine use: Recommended for topside, superstructure and interior use
Protective use: Recommended for refineries, power plants, bridges and buildings. Suitable for a wide range of industrial structures
Pack size: 5 litres
Colours: Available in all RAL, British Standard and Jotun Marine colours!
Finish: Semi Gloss

Product Description

Jotun Pilot ACR is a one component physically drying acrylic coating. It has a semi gloss finish with good gloss retention. It is fast drying. It can be used direct to metal. To be used as topcoat in atmospheric environments. It can be applied at sub zero surface temperatures. The product is certified not to spread surface flames.

Recommended Uses

Marine use: Recommended for topside, superstructure and interior use
Protective use: Recommended for refineries, power plants, bridges and buildings. Suitable for a wide range of industrial structures

If you can't find your colour from the dropdown box then just select 'My Colour Isn't Listed' and let us know your colour at checkout!

Not the product you need? Take a look at our eBay Shop for related items.

Further Details and Technical Data

Technical Data

Number of components: One
Solids by volume: 55 ± 2 %
Gloss level (GU 60 °): Semi Gloss (35-70)
Flash point: 25 °C
Density: 1.5 kg/l
VOC-EU: 395 g/l
Dry film thickness: 60-120 μm
Wet film thickness: 110-220 μm
Theoretical spreading rate: 9.2-6.4 m2/l
Touch dry: 5°C = 20 minutes; 23°C = 15 minutes
Walk-on dry: 5°C = 7 hours; 23°C = 4 hours
Overcoating: 5°C = 3 hours; 23°C = 1 hours
Shelf life: 23°C = 48 months

Note: Bright colours may need film thickness in the high end of the recommended specification range to achieve opacity.

Special effect colours may have diverging specification range. Refer to the Application Guide (AG) for additional information or contact us for advice.

Please refer to the product Data Sheet for more technical information. Contact us to request a copy.

Surface Preparation

To secure lasting adhesion to the subsequent product all surfaces shall be clean, dry and free from any contamination. Refer to data sheet for more details.

Application & Thinning

Spray
Brush
Roller (But not recommended for first coat on bare metal)

Please refer to the product Data Sheet for further application instructions.

Thinner Cleanup

Jotun Thinner No.7 / Jotun Thinner No.10

Product Compatibility

Depending on the actual exposure of the coating system, various primers and topcoats can be used in combination with this product. Some examples are shown below. Contact us for specific system recommendation.

Previous coat:

Epoxy
Epoxy mastic
Acrylic

Subsequent coat:

Acrylic

Storage

The product must be stored in accordance with national regulations. Keep the containers in a dry, cool, well ventilated space and away from sources of heat and ignition. Containers must be kept tightly closed. Handle with care.

Caution

This product is for professional use only. The applicators and operators shall be trained, experienced and have the capability and equipment to mix/stir and apply the coatings correctly and according to Jotun's technical documentation. Applicators and operators shall use appropriate personal protection equipment when using this product. This guideline is given based on the current knowledge of the product. Any suggested deviation to suit the site conditions shall be forwarded to the responsible Jotun representative for approval before commencing the work.

Safety

Please observe the precautionary notices displayed on the container. Use under well ventilated conditions. Do not inhale spray mist. Avoid skin contact. Spillage on the skin should immediately be removed with suitable cleanser, soap and water. Eyes should be well flushed with water and medical attention sought immediately.

Ensure appropriate PPE is worn whilst using this product. Contact us for free advice.

Refer to the product Data and Safety Sheets for further safety details.