Paint Set Suitable for Tesla, Pmng / NEU-112E Steel Grey Metallic+Clear Varnish

The description of this item has been automatically translated. If you have any questions, please feel free to contact us.


Touch-up pen set suitable for Tesla 

(base coat + clear coat)

+ 2 dabs of varnish

 Color code: PMNG / NEU-112E 

Color name: STEEL GRAY METALLIC 


 Our touch-up pens are a good solution for the simple, quick and cost-effective removal of small paint damage.

 

 Characteristics:

· High light and temperature resistance

· Very economical with good flow properties

· Highest filling and covering power

· easy processing

· Quick drying as all colors are acrylic based 

 

Scope of delivery:

1 touch-up pen 5ml suitable for Tesla, Color: as stated above, with screw cap, integrated brush and mixing ball.

1 clear varnish touch-up pen 5ml, undiluted, with screw cap and integrated brush.

2 polish swabs (the colors of the polish swabs may vary)

 If you cannot find the color code on your vehicle, send us a message. We would be happy to help you.

 

   Shipment:

-         A notice:

All colors (Made in Germany) are freshly filled after ordering and are checked by us for quality and consistency.

Color differences between the touch-up pen and your vehicle are possible due to the age of the vehicle and the weather. 

We always mix the standard shade, so there may be color deviations as there are several shades for most colors.

Be sure to check the color before processing.


Remark:

Be sure to protect against frost!

Repairing damaged car paint using our touch-up pen cannot replace professional repairs in a car paint shop! 

No liability for improper use.

 

Rules for VOC regulation


Since January 1, 2007, the “VOC regulation” has also applied to car paint dealers
(2004/42/EC or 1999/13/EC). We have to ensure that customers
For example, we have a paint that does not meet the VOC requirements
is also only used for applications that are regulated by the VOC regulation
are mentioned, such as classic car restoration or that
filling spray cans.

Products that comply with the VOC regulation will continue to be sold without restrictions.

Products that do not meet the standards of the VOC regulation may only be used for the following applications.

restoration
of vintage cars filling aerosol spray cans painting of vehicles
Bundeswehr, civil defense, fire brigade and those responsible for maintenance
the forces responsible for the order - painting of vehicles that are in the
public service can only be used in the urban area
Industrial painting (e.g. plastic parts not related to vehicles)

The distributor is responsible for ensuring that only VOC-compliant products are used
Products for vehicle painting are sold and more
also ensures that the products that can be sold on a limited basis are only available to them
mentioned applications can be used.

I hereby confirm that I am familiar with the legal situation of the ChemVOCfarbenV and that I have been sufficiently informed about this by Lackstift Express Bühner. I confirm that I do not comply with the respective VOC limits
corresponding products that I purchase from Express Bühner touch-up pen,
used exclusively for the exceptional cases provided for by law
become. Responsibility for the intended use of the
Touch-up pen Express Bühner purchased item is hereby transferred to me.

Touch-up pen Express Bühner

Bernd Bühner
Mönchenhöfner Dorfstrasse 58
06917 Jessen / OT Mönchenhöfe

 

No sales tax is shown, as small businesses in accordance with Section 19 Para. 1 UStG.


Application information:

  1. Clean the area thoroughly, if rust is visible, remove it carefully with sandpaper (please be careful not to damage the surrounding paint).
  2. For bare plastic parts, we recommend using a plastic adhesive primer. This is applied very thinly to the bare plastic and approx. Allow to absorb for 10 to 15 minutes. You can find the plastic adhesive primer in our shop.
  3. Shake the 1K primer/rust protection paint pen (if necessary) vigorously and apply very carefully with the brush and allow to dry (approx. 10 to 15 minutes should usually be enough).
  4. Then shake the base coat paint pen vigorously and carefully apply it thinly in several layers, allowing it to dry in between (approx. 10 to 20 minutes. ), repeat the whole thing until the base coat has covered, then again for approx. Allow to dry for 15 – 20 minutes.
  5. Then shake the clear varnish paint pen vigorously and apply it carefully, then allow it to dry properly. The clear coat is usually thicker than the base coat, so you should use it more sparingly.

-   

  Additional Information:

Purchase

  • We will combine all items that you purchase from us within 3 hours into one order
  • Therefore, please only complete your order after purchasing the last item
  • When paying by bank transfer, please always include your eBay name in the intended purpose so that we can allocate the receipt of payment

Reviews

  • We evaluate immediately after receiving your review
  • If you are not satisfied with our products, we ask you to give us a short feedback. 
  • We always strive to maintain the satisfaction of our customers and will try to solve any problem so that no negative reviews have to be given.


Danger sign

        

Hazard information


H225 liquid and steam easily flammable.

H315 causes skin irritation.

H319 causes severe eye irritation.

H336 can cause sleepiness and drowsiness.

H373 can damage the organs with longer or repeated exposure.


Safety information


P101 is required by medical advice, packaging or labeling label.

P102 must not get into the hands of children.

P103 Read labeling label before use.

P210 Keep away from heat, hot surfaces, sparks, open flames and other sources of ignition. Do not smoke.

P260 dust/smoke/gas/fog/steam/aerosol do not inhale.

P280 protective gloves/protective clothing/eye protection/face protection.

P303+P361+P353 In contact with skin (or hair): Remove all contaminated clothing immediately. 

Wash/shower with water.

P305+P351+P338 In case of contact with eyes: Rinse gently with water for a few minutes. Remove any existing contact lenses if possible. Rinse further.

P312 If you feel unwell Poison control center/doctor call.

P337+P313 with persistent eye irritation: Obtain medical advice/consult medical help.

P501 Dispose of contents/container in accordance with local/regional/national/international regulations.


MUST NOT BE IN THE HANDS OF CHILDREN!

I hereby confirm that I am familiar with the legal situation of the ChemVOCfarbenV and that I have been sufficiently informed about this by Lackstift Express Bühner. I confirm that I do not comply with the respective VOC limits For bare plastic parts, we recommend using a plastic adhesive primer. This is applied very thinly to the bare plastic and approx. Allow to absorb for 10 to 15 minutes. You can find the plastic adhesive primer in our shop. Then shake the base coat paint pen vigorously and carefully apply it thinly in several layers, allowing it to dry in between (approx. 10 to 20 minutes. ), repeat the whole thing until the base coat has covered, then again for approx. Allow to dry for 15 – 20 minutes. Then shake the clear varnish paint pen vigorously and apply it carefully, then al