Before Ordering: The list consists of one full kit with one monitor, 10 cap sensors and a signal booster/ repeater. We'd like to offer the below service.

1. Free Sensor Programming. Please leave us a message on how many axles and how many tires on your vehicle, or your vehicle photo will be also fine, we will program your new kit in factory before shipment.

2. One year warranty on monitor and sensors.

 

Brief Introduction:

· 3.5 inch monitor screen

· Displays up to 14 tires pressure and temperature simultaneousy

· Easy installation, waterproof and dust proof cap sensors

· Monitor with solar power panel and built-in rechargeable lithium battery

· Monitor with automatic backlight and built-in motion sensor

· 5V type-C charge port in the monitor

· Audible and visible warnings

· Set each axle individually

· Hide and show trailer function

 

Monitor 

 Cap Sensor

Pressure Range

0 〜188 PSI （0 〜13 BAR ）

0 〜188 PSI （0 〜13  BAR ）

Working Temperature

-30℃ 〜8 0℃

-30℃ 〜  8 0℃

Storage Temperature

- 40℃ 〜  8 5℃

-40℃ 〜  8 5℃

Pressure Accuracy

±1.5 PSI（±0.1 BAR）

±1.5 PSI（±0.1 BAR）

Temperature Accuracy

±3℃

±3℃

Transmission Power

<10dBm

<10dBm

Transmission Frequency

433.92MHz

433.92MHz

Battery Type

Rechargeable Lithium Battery

CR1632 Cell Battery

Dimension

4.6x2.8x0.9 Inch

Diameter 0.9 Inch，Height 0.85 Inch

Weight

5.93  Ounce

0.45 Ounce


 TIPS:

1. Please program the sensors before installation, also please turn on the monitor before sensor installation for swift signal transmission. It will take several minutes for the monitor to collect all the sensors data for first time installation.


2. Fix the monitor far from GPS, tracker, wireless cameras or radio to avoid wireless signal interference.


DIY easy Sensor Installation please refer to:

https://youtu.be/It1Gk7v13fE?si=3mD6JJUdg3A6pJEh

Please apply some soap bubbles on the sensor and tire valve after installation to check if there is leakage.

 

If you will need to program the system by yourself, or add sensors for your trailer and spare tire, pls refer to link below:

https://youtu.be/TPfS0AiJq40?si=ruZ4DxeMKBPfe8cp

 

Factory default setting for High/ Low pressure alarm is 175/ 35 PSI, but user could still set each axle separately. System setting details pls refer to link:

https://youtu.be/VWBRB_eMQDs?si=YNEuKDrOCEMAkZc9

 

Sensor battery replacement please refer to link:

https://youtu.be/Ep4f1BSsC6Q?si=DWvT6X6qecWK8TzP

 

A new sensor battery could work for about 1~2 years according to our field experience. 

Actual battery life has close relationship with vehicle driving hours, system using temperature condition (The battery will consume faster in extreme high or low temperature environment) and tire alarm frequency. 

The monitor will indicate with beeps and flashing icons on the screen to indicate low battery voltage.


A new sensor battery voltage should be over 3.0V. The sensor could work properly when the battery voltage is over 2.8V. If one sensor could not work properlly, please use a voltagemeter to check it.

 

Also, please take care of the sensor water proof O-ring while battery replacement. There should be spare waterproof O-rings in your acceseries pack.