I Don't Take A Break My Tool Needs To Rest White Fun Sticker Decal

The description of this item has been automatically translated. If you have any questions, please feel free to contact us.


ARTHIRT article page sticker

ARTSHIRT LOGO
Assembly instructions

Vehicle sticker
Before attaching the viny run glue, please clean the area to be glued thoroughly with a damp, lint -free cloth. Make sure that the viny run glue is fully liable to the transparent transmission film (possibly Please react briefly again!). The surface should be dust, wax and fat-free. For the attachment we recommend a adhesive temperature of +10 degrees upwards (surface and the surrounding area).

Position the sticker and then fix it on the side with adhesive film or crippled tape so that you can fold it up.

Now remove the carrier paper carefully and slowly and make sure that all vinyl elements stick to the transparent transmission film.

Now fold the sticker again and keep it slightly tight and with a small distance over the area to be glued to avoid later air pitches under the film.

Now cut the viny run glue with moderate pressure and in one direction with the other hand (e.g. with a credit card). It is advisable to cut from the fixation side to the other end.

Now remove the fixation and slow down the transmission film slowly and in a flat angle. Complete!

   


Description:


- Product: Oracal® 751c High Performance Cast
- High quality, self -adhesive viny run glue

- Can be leveraged on Allen smooth, silicone and fat-free surfaces (e.g. car paint, mirror, windows, etc.)
- free -standing, only the motif is visible
- wafer -thin film, the motif looks like painted
-Shelf life: 5-7 years outdoor area / 7-10 years of interior
- Washing system festival, light / UV-resistant, weather-resistant
- removable without residue
Before attaching the viny run glue, please clean the area to be glued thoroughly with a damp, lint -free cloth. Make sure that the viny run glue is fully liable to the transparent transmission film (possibly Please react briefly again!). The surface should be dust, wax and fat-free. For the attachment we recommend a adhesive temperature of +10 degrees upwards (surface and the surrounding area). Now remove the carrier paper carefully and slowly and make sure that all vinyl elements stick to the transparent transmission film. Now fold the sticker again and keep it slightly tight and with a small distance over the area to be glued to avoid later air pitches under the film. Now cut the viny run glue with moderate pressure and in one direction with the other hand (e.g. with a credit card). I
Recommended products
Provided by
Oberflächenfinish Glänzend
Anzahl der Einheiten 1
Thema Spruch
Passend für Fenster- & Windschutzscheibe
Passend für Karosserie
Herstellungsland und -region Deutschland
Referenznummer(n) OEM Nicht zutreffend
Referenznummer(n) OE Nicht zutreffend
Hersteller Orafol
Produktart Aufkleber
Farbe Weiß
Größe 20 cm (längste Seite)
Einbauposition Frei wählbar
EAN Nicht zutreffend