The electric portable pump developed! Please read this instruction manual carefully before using the pump for the first time.
This product is developed for emergency pumping of high-pressure tires used in bicycle international competitions. It is also suitable for inflating ordinary bicycles, cars, motorcycle tires, balls, inflatable toys and other entertainment and tourism products.
1. Function button description
：Short press to switch between car, motorcycle and ball mode. The default value is long press for three seconds to turn on the LED lights, and long press again to turn off the LED lights.
：Long press for three seconds to turn on, and lightly press again to start the motor to inflate.
：Unit switch key, switch PSI, BAR, KPA, Kg/cm²
：Air pressure setting "+" key, long press can quickly increase.
：Air pressure setting "-" key, long press can quickly decrease.
：The USB reverse charging port can be used as a power bank.
：Micro-USB charging port.
2. Technical parameters
- Input voltage: charger 5V/2A
- Working current: 1-5A
- Maximum current: ≤5A
- No-load current: ≤2A
- With USB charging: 5V 1A
- Air efficiency: charge 1.95 mountain tires for 2 minutes
- Emergency lighting: 80 lumens for 7 hours
- Working temperature: -20℃～70℃
- Noise decibels: 60～80 decibels
- Charging method: Micro USB
- Charging time: about 3 hours
- Attainable pressure: 150PSI/10.3BAR/990KPA/10.5KG/CM
- Product size: 120*78*50mm
3. Accessories description
2. Inflatable tube
3. Inflatable accessory connector
4. USB charging cable
4, matters needing attention
- It is forbidden for children to use this inflator! Keep it out of reach of children! Never insert the trachea into the mouth, ears and eyes of living animals, and do not use the inflator as a toy!
- It is forbidden to use this gas canister near flammable and explosive liquids and gases (such as gas stations)!
- People should not walk away when the inflation is in progress. After 8 minutes of continuous use, the machine must be stopped for 8 minutes.
- If there is abnormal noise or the temperature is too high during inflation, please shut down immediately and let it cool down for at least 15 minutes. Be careful of hot hands when removing the trachea.
- The product is resistant to rain, water, and impact.
- If the inflator is not used for a long time, it must be stored in a dry and closed place. For long-term storage, it is recommended to charge it once every three months.
Before using the rechargeable pump, check whether it has been charged enough. The first charge is 4 hours. After each charge is fully charged, the charging indicator will light up in red, and it will light up in green when it is fully charged.
Tips
For the safety of you and others, please use the pump and its accessories in accordance with the instructions provided by the manufacturer.
Use methods not mentioned in the manual may cause danger.
Instructions for use:
1. Insert the pin of one end of the charger into the car USB in advance, and insert the other end of the USB plug into the USB socket on the top of the pump to charge the air pump. The normal charging time is 4 hours after the first charge and until each charge is fully charged.
2. Turn on the power button, the LCD screen starts to display, press the switch button to switch between the four air pressure units of PSI, BAR, KAP, KG/CM², select the unit you want, and press the plus or minus button to set what you need The value of the air pressure, after the flashing stops, press the power button to start the inflation, the bottom LED lights when inflating, and the LED lights will automatically turn off after the automatic charging stops.
3. Short press the light button to switch between motorcycles, cars, and balls.
Display motorcycle mode default 28PSI
Display car mode default 36PSI
Display ball mode default 8 PSI
4. After setting the profile mode, short press ‘-’ or ‘+’ to adjust the preset pressure value, long press ‘-’ or ‘+’ to quickly adjust the preset pressure value.
5. Press the power button to start inflation. When the inflation pressure reaches the pressure value you set, the smart inflator will automatically stop the inflation work immediately, but the LED light is still on, and then press the power switch to turn it off.
6. When the inflation is completed, unscrew the air tube to complete the inflation, and be careful to connect the tire inflation connector to see if it is hot; it is normal that there will be a small amount of air leakage when the connector is unscrewed.
7. If it is judged that the tire pressure is too high, you can use the tire inflation connector to screw on the appropriate position on the valve core to deflate and reduce pressure.
8.Unscrew the tire inflation connector from the main engine, insert it into the storage slot at the bottom of the cylinder, put the cylinder away, and place it in a dry, ventilated and safe place.
The electric portable pump developed! Please read this instruction manual carefully before using the pump for the first time.
This product is developed for emergency pumping of high-pressure tires used in bicycle international competitions. It is also suitable for inflating ordinary bicycles, cars, motorcycle tires, balls, inflatable toys and other entertainment and tourism products.
1. Function button description
：Short press to switch between car, motorcycle and ball mode. The default value is long press for three seconds to turn on the LED lights, and long press again to turn off the LED lights.
：Long press for three seconds to turn on, and lightly press again to start the motor to inflate.
：Unit switch key, switch PSI, BAR, KPA, Kg/cm²
：Air pressure setting "+" key, long press can quickly increase.
：Air pressure setting "-" key, long press can quickly decrease.
：The USB reverse charging port can be used as a power bank.
：Micro-USB charging port.
2. Technical parameters
- Input voltage: charger 5V/2A
- Working current: 1-5A
- Maximum current: ≤5A
- No-load current: ≤2A
- With USB charging: 5V 1A
- Air efficiency: charge 1.95 mountain tires for 2 minutes
- Emergency lighting: 80 lumens for 7 hours
- Working temperature: -20℃～70℃
- Noise decibels: 60～80 decibels
- Charging method: Micro USB
- Charging time: about 3 hours
- Attainable pressure: 150PSI/10.3BAR/990KPA/10.5KG/CM
- Product size: 120*78*50mm
3. Accessories description
2. Inflatable tube
3. Inflatable accessory connector
4. USB charging cable
4, matters needing attention
- It is forbidden for children to use this inflator! Keep it out of reach of children! Never insert the trachea into the mouth, ears and eyes of living animals, and do not use the inflator as a toy!
- It is forbidden to use this gas canister near flammable and explosive liquids and gases (such as gas stations)!
- People should not walk away when the inflation is in progress. After 8 minutes of continuous use, the machine must be stopped for 8 minutes.
- If there is abnormal noise or the temperature is too high during inflation, please shut down immediately and let it cool down for at least 15 minutes. Be careful of hot hands when removing the trachea.
- The product is resistant to rain, water, and impact.
- If the inflator is not used for a long time, it must be stored in a dry and closed place. For long-term storage, it is recommended to charge it once every three months.
Before using the rechargeable pump, check whether it has been charged enough. The first charge is 4 hours. After each charge is fully charged, the charging indicator will light up in red, and it will light up in green when it is fully charged.
Tips
For the safety of you and others, please use the pump and its accessories in accordance with the instructions provided by the manufacturer.
Use methods not mentioned in the manual may cause danger.
Instructions for use:
1. Insert the pin of one end of the charger into the car USB in advance, and insert the other end of the USB plug into the USB socket on the top of the pump to charge the air pump. The normal charging time is 4 hours after the first charge and until each charge is fully charged.
2. Turn on the power button, the LCD screen starts to display, press the switch button to switch between the four air pressure units of PSI, BAR, KAP, KG/CM², select the unit you want, and press the plus or minus button to set what you need The value of the air pressure, after the flashing stops, press the power button to start the inflation, the bottom LED lights when inflating, and the LED lights will automatically turn off after the automatic charging stops.
3. Short press the light button to switch between motorcycles, cars, and balls.
Display motorcycle mode default 28PSI
Display car mode default 36PSI
Display ball mode default 8 PSI
4. After setting the profile mode, short press ‘-’ or ‘+’ to adjust the preset pressure value, long press ‘-’ or ‘+’ to quickly adjust the preset pressure value.
5. Press the power button to start inflation. When the inflation pressure reaches the pressure value you set, the smart inflator will automatically stop the inflation work immediately, but the LED light is still on, and then press the power switch to turn it off.
6. When the inflation is completed, unscrew the air tube to complete the inflation, and be careful to connect the tire inflation connector to see if it is hot; it is normal that there will be a small amount of air leakage when the connector is unscrewed.
7. If it is judged that the tire pressure is too high, you can use the tire inflation connector to screw on the appropriate position on the valve core to deflate and reduce pressure.
8.Unscrew the tire inflation connector from the main engine, insert it into the storage slot at the bottom of the cylinder, put the cylinder away, and place it in a dry, ventilated and safe place.