Description:

Synthetic glass (acrylic) polishing, Oxy - hydrogen generator is a machine using high temperature flame to make acrylic edge smooth and bright.  

The heat polishing on the acrylic rough surface can be achieved as long as the flame passing by gently, and the acrylic products will become glittery and bright.

 

Parameter	Model: 75L 300W H160	Model: 95L 300W H180	Model: 150L 800W H260
Input Voltage	AC 110V	AC 110V	AC 110V
Rated Output Gas	75L/H	95L/H	≤150L/H
Operating Gas Pressure	0.13–0.15MPa	0.13–0.15MPa	0.13–0.15MPa
Ambient Temperature	-10°C ~ 40°C	-10°C ~ 40°C	-10°C ~ 40°C
Flame Temperature	≥2800°C	≥2800°C	≥2800°C
Water Consumption	0.025 L/H	0.03 L/H	0.05 L/H
Flame Gun Quantity	Single	Double	Double
Electrolyzer Capacity	1.0L	1.0L	1.0L
Power Consumption	300W	300W	800W
Color Options	Blue / Silver	Blue / Silver	Blue / Silver

Flame Gun instruction:

1. Adjusting valve;  

2. Connector; 

3. Flame nozzle; 

4. Bend flame nozzle (option); 

5. Flame gun bar; 

6. Air inlet port; 

7. Pin type flame nozzle (option).

Add water timely

After several hours of operation, the water level may fall below the “middle” line, you should add some water. Distilled water is the best choice, next are purified water, cold boiled water and mineral water. 

How to add water?
1. Turn off the torch.
2. Switch off the power and open the valve on the torch to let out the remaining gas.
3. Screw off the top cover.
4. Add water close to the “high” line.
5. Screw on the cover and switch on the machine, and it can work again.

Attention:
KOH or NaOH is dangerous, please do not eat them.
The temperature is up to 2800℃ when burning, please put the flame polishing machine in the safe place.
Do not operate the flame acrylic polishing machine while your hand is wet; be careful of the electric shock.

Warning:
When abnormal things happened, such as abnormal noise, smell, smog, quite high temperature, electric leakage, you should cut off power supply immediately.
Do not repair it by yourself, you should contact us.
The above cover; please do not load metal pieces.
Please connect the ground wire.
Forbid ignite while no air pressure

Package include：

Machine 1 set

Flame Gun 2 pieces

Plastic Funnel 1 piece

Flame Spray Nozzle 1 piece

Rubber Tube 1 piece

Three Way Cock 1 piece

Power Cable 1 piece

Electrolyte Powder 0 bottle

Instruction 1 piece

P. S.: Electrolyte powder (NaOH or KOH) is forbidden by express company, so we could not put it into the package. You can buy it from local chemicals paint.
One bottle is 500g, and it can be used about 3 - 4 months.