Store Categories
✰. Plug Type: 9005+H7+H3, high beam + low beam + fog light
✰. LED Quantity(each bulb): 4pcs COB chips
✰. Operating Voltage: DC 9-32V(fit 12V,24V vehicles)
✰. Color Temperature: Pure White 6000K
✰. IP68 rated water and dust seal, 360 degree beam angle
✰. Material: Aviation 6063 aluminum profile
✰. Operating Temperature: -40-80 degree Celsius
✰. Over 50000hrs lifetime
✰. Usage: LED Headlight + Fog Light/DRL Bulbs
Product Features:
✰. High-power chips, ultra-thin board shape design makes the installation and fit better, the illumination is more uniform, and avoids the disadvantages of poor illumination width caused by the point light source; Our Lights suitable for use with 12-30V voltage.Our Lights has the characteristics of light diffusivity, wide-angle illumination and high lumen;
✰. The LED has high luminous purity, no need for lampshade filtering, and the light wavelength error is within 5 nanometers
✰. There is no delay when the LED lights up, while the traditional tungsten bulb has a delay of 0.3 seconds.
✰. LED has low power consumption. When it reaches the same brightness of traditional bulbs, it consumes only 6% of traditional bulbs, and it also saves electricity and fuel!
✰. It has a long life, its filament-free structure does not generate heat, and it can be used for more than 6 years under normal conditions
✰. LED car lights can make the vehicle control circuit not easy to oxidize, with a maximum load current of 0.1A.
Two-way heat dissipation chiannel:
✰. All-in-one aluminum profile as heat conduction system,360 degree heat radiating
✰. High speed mute fan(12000R/Min),high Air flow for faster cooling rate
Package Included:
✰. 2x 9005 LED headlight bulb
✰. 2x H7 LED headlight bulb
✰. 2x H3 LED fog light bulb
Install Caution:
✰. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
✰. Put the vehicle into park or make sure it is securely in gear.
✰. Be sure to turn off the ignition and remove the key.
✰. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
✰. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
✰. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
✰. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.
Copyright©2018 datacaciques
✰. Plug Type: 9005+H7+H3, high beam + low beam + fog light
✰. LED Quantity(each bulb): 4pcs COB chips
✰. Operating Voltage: DC 9-32V(fit 12V,24V vehicles)
✰. Color Temperature: Pure White 6000K
✰. IP68 rated water and dust seal, 360 degree beam angle
✰. Material: Aviation 6063 aluminum profile
✰. Operating Temperature: -40-80 degree Celsius
✰. Over 50000hrs lifetime
✰. Usage: LED Headlight + Fog Light/DRL Bulbs
Product Features:
✰. High-power chips, ultra-thin board shape design makes the installation and fit better, the illumination is more uniform, and avoids the disadvantages of poor illumination width caused by the point light source; Our Lights suitable for use with 12-30V voltage.Our Lights has the characteristics of light diffusivity, wide-angle illumination and high lumen;
✰. The LED has high luminous purity, no need for lampshade filtering, and the light wavelength error is within 5 nanometers
✰. There is no delay when the LED lights up, while the traditional tungsten bulb has a delay of 0.3 seconds.
✰. LED has low power consumption. When it reaches the same brightness of traditional bulbs, it consumes only 6% of traditional bulbs, and it also saves electricity and fuel!
✰. It has a long life, its filament-free structure does not generate heat, and it can be used for more than 6 years under normal conditions
✰. LED car lights can make the vehicle control circuit not easy to oxidize, with a maximum load current of 0.1A.
Two-way heat dissipation chiannel:
✰. All-in-one aluminum profile as heat conduction system,360 degree heat radiating
✰. High speed mute fan(12000R/Min),high Air flow for faster cooling rate
Package Included:
✰. 2x 9005 LED headlight bulb
✰. 2x H7 LED headlight bulb
✰. 2x H3 LED fog light bulb
Install Caution:
✰. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
✰. Put the vehicle into park or make sure it is securely in gear.
✰. Be sure to turn off the ignition and remove the key.
✰. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
✰. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
✰. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
✰. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.
We only ship to paypal confirmed address.
Item will be sent within 24 hours after payment received
We will ship all orders asap. from our USA warehouse, Others will ship from China warehouse.( No service on Weekend and public holidays).
Delivery time within the U.S. is usually just 3 to 5 business days, however in rare cases it could take 5 to 7 business days.
Tracking numbers for all orders are added to eBay once they have been dispatched; please login to eBay to find the tracking information for your order.
We accept PayPal via eBay Secure Check-Out only.
Payment is expected within 7 days of auction close. Unpaid Items will be forfeited per eBay .
Immediate payment needs to be processed for items with Add to Cart option so that any promotional discounts can be applied to your order immediately.
Our 60-day Satisfaction Guarantee assures our customers that they will receive all orders promptly and exactly as described. In addition, it allows customers to return new and unused products in their original factory condition for any reason within 60 days from the date of purchase.
Buyers are responsible for appropriate packing, returning shipping cost, insurance and returning the item in "new" condition. Used items will not be accepted for return.
We will replace the returning item with an identical item, issue a full store credit or a full refund.