Josco - 100m Replacement Buffs - Twin Pack - JRPK100

Twin pack containing Josco polishing buffs, for use with Josco polishing compounds. Ideal for polishing aluminium, brass, steel, stainless steel, copper and most other metals when used with the appropriate Josco Polishing Compound. This kit contains: 1 x 100mm Sisal Buff 1x 100mm Loose Leaf Calico Buff Instructions for use: Select the correct buff for your job. Loose Leaf Calico – SS (White) Compound for aluminium, SSX (Light Green) Compound ideal use on copper, brass and stainless steel, Multishine (Light Blue) Compound great for plastics and die-cast articles Sisal – Fastcut (Dark Grey) Compound to cut back light scratch marks on copper, brass and stainless steel prior to polishing 2. Dress the buff with compound across the face of the rotating wheel for a few seconds. Take care not to apply too much compound as this will overload the buff. It is better to apply a little compound more frequently than to overdress the buff. 3. Bring the workpiece into contact with the buff and with light pressure, move back and forth across the job. 4. After polishing, remove any residue with hot water and household detergent. WARNING: Run in the forward direction only. Running drill in reverse will cause the nut to come loose. Not to be used on plastic coated, black, coloured, or gun-metal finishes. This will cause damage to the surface. Part code: JRPK100 Barcode: 9314028002733 Diameter: 100mm Maximum RPM: 4,500

Josco - 100m Replacement Buffs - Twin Pack - JRPK100

Twin pack containing Josco polishing buffs, for use with Josco polishing compounds.

Ideal for polishing aluminium, brass, steel, stainless steel, copper and most other metals when uséd with the appropriate Josco Polishing Compound.

This kit contains:

  • 1 x 100mm Sisal Buff
  • 1x 100mm Loose Leaf Calico Buff

Instructions for use:

  1. Select the correct buff for your job.

  • Loose Leaf Calico – SS (White) Compound for aluminium, SSX (Light Green) Compound ideal use on copper, brass and stainless steel, Multishine (Light Blue) Compound great for plastics and die-cast articles

  • Sisal – Fastcut (Dark Grey) Compound to cut back light scratch marks on copper, brass and stainless steel prior to polishing

2. Dress the buff with compound across the face of the rotating wheel for a few seconds. Take care not to apply too much compound as this will overload the buff. It is better to apply a little compound more frequently than to overdress the buff.

3. Bring the workpiece into contact with the buff and with light pressure, move back and forth across the job.

4. After polishing, remove any residue with hot water and household detergent.

WARNING: Run in the forward direction only. Running drill in reverse will cause the nut to come loose. Not to be uséd on plastic coated, black, coloured, or gun-metal finishes. This will cause damage to the surface.

Part code: JRPK100

Barcode: 9314028002733

Diameter: 100mm

Maximum RPM: 4,500

×