- DESMOPOL is a highly elastic and wear-resistant membrane that, once applied, offers great stability, durability and waterproof certified (see ETA 10/0121 and BBA 16/5340)
- Thanks to its versatility DESMOPOL adapts to any surface, making it the ideal product for application on uneven surfaces and in areas of any shape, whether curved or squared.
- No surface reinforcement is required, only detail works encounters with other building elements. (see ETA 10/0121 and BBA 16/5340)
- Green roof application certified according to EN 13948( on ETA 10/0121 and BBA 16/5340)
- DESMOPOL membrane can be applied in an only single layer (minimum thickness recommended 1,5 mm) by mixing with DESMOPLUS, this fact upgrades their physical performances, increases the execution speed and thus reduces the direct costs of application, forms a solid membrane without bubbles inside. With this system, do not use an airless machine. Do not use this additive with temperatures above 35°C, or in any case, store the drums in cool and not sunny areas.
- Applying DESMOPOL saves in seals and any other kind of joins, as the finish is uniform and makes up a single layer, providing a surface with optimum maintenance and cleaning properties.
- The DESMOPOL polyurethane membrane system should be applied in dry conditions avoiding the presence of humidity or water coming from the surface to be coated or the substrate, whether at the time of application or subsequently.
- If there is humidity or moisture in the substrate at the time of application, check the technical specifications of our primers where the maximum support humidity ranges are specified.
- The DESMOPOL system requires solar radiation protection (UV rays) because is an aromatic membrane, so, in the absence of other physical protection elements, we recommended the application of our coloured resins TECNOTOP 2C/2CP/1C
- The DESMOPOL system's properties enable it to bond to any surface, such as cement, concrete, polyurethane foam, butyl and bituminous sheets wood, polyurethane plates, metal, etc.
- Due to its resistance, it can be walked on and it will accept a rough finish to make it non-slip.
- DESMOPOL is immune to temperature changes of between -40ºC and +80ºC, conserving its elastic properties.
- The DESMOPOL polyurethane membrane is a self-levelling membrane that requires additives for its application on vertical and sloped surfaces more than 1,5% of a gradient. Mix DESMOTHIX maximum ratio 1 litre for each 25 kg of DESMOPOL. You could apply on thin several layers too.
- Do not use airless equipment when you apply with DESMOTHIX
- Ceramic flooring can be placed on top. In this case, it is appropriate to apply a thin layer of PRIMER PU-1000(50~60 g/m²) and it still not dry, sprinkle a load of SILICA SAND to improve the mechanical anchoring
- Ceramic flooring can be placed on top. In this case, we recommended to spread a well-distributed load of SILICA SAND to improve mechanical anchorage in the last layer of DESMOPOL, or if it has already catalysed, spreading a layer of 50 to 60 g/m² PRIMER PU-1000, for anchoring the SILICA SAND
- The repairs are easily localised and are easy to carry out (see “REPAIR AND OVERLAPS PROCEDURES”)
|