Fitment:
Fit the tilt caps on all Showa manufactured
Trim/Tilt Units, Yamaha F115-F150 (2004-2010), all Yamaha I4 2.8L
(F175-F200), Yamaha 2-Strokes (115-225hp), all Yamaha VMAX, all Suzuki,
Honda, Johnson, and Evinrude.
Tilt Cap on ALL SHOWA manufactured Trim/Tilt Units
Tilt Cap on Yamaha F115-F150 (2004-2010)
Tilt Cap on ALL Yamaha I4 2.8L (F175-F200)
Tilt Cap Yamaha 2-Strokes (115-225hp)
Tilt Cap on ALL Yamaha VMAX
Tilt Cap All Suzuki, Honda,Johnson, Evinrude
Features:
1) Equivalent Yamaha Factory Toosl YB-06548, Replacement Pins AMT0011 - L-6mm
.
2) Trim and Tilt hydraulic pin wrench. 200 ft-lb MIN Pin Strength.
3) To rebuild a leaked device on outboard engine,
hydraulic trim and tilt unit .Used to remove and install the Trim and
Tilt Caps without damaging it and the steering cylinder.
4) Usually, you will put a little drift into one
of those holes in the trim and tilt caps with a hammer. Than,you destroy
these cap ,you will thrown them away,which cost a about hundred bucks.
So, you really need the pin wrench to help you finish that case with
ease
.
5) Made of high hardened 4140 impact grade
steel,with silver oxide coating which is rust-resistance and durable to
use.Better than OEM.
Package included:
1/2" socket drive, Marine Pin Wrench with a size of 35mm x 6mm
