Fosroc Conbextra GP
High Strength Flowable Non-Shrink Cementitious Grout | pallet of 20 packs
- Shrinkage compensated
- Just add water
- Flowable: 4.0 - 4.5 litres to 25kg bag - yield approx. 13.25 litres
- Trowelable: 3.4 - 3.6 litres to 25kg bag - yield approx. 12 litres
- Initial set approx. 6 hours
- Individual pack size: 25kg
- This listing is for a pallet of 20 bags of Fosroc Conbextra GP
Product Description
Fosroc Conbextra GP is a free-flow, non-shrink cementitious grouting, for gap thicknesses 10 to 75 mm. It is high strength, chloride free and can be used at flowable or trowelable consistency.
This listing is for a pallet of 20 x 25kg bags of Fosroc Conbextra GP. with free delivery
Recommended Uses
Conbextra GP is suitable for a wide range of applications:
- Stanchion baseplates
- Installing starter bars
- Filling joints between pre-cast concrete panels
- Grouting applications where pouring access is restricted
- Anchoring or reinforcing steel bars
- Installation of tie bars
- Bedding and other general grouting applications
Not the product you need? Take a look at our eBay Shop for related items.
Further Details and Technical Data
Technical Data
Flowable: 4.0 - 4.5 litres to 25kg bag - yield approx. 13.25 litres
Trowelable: 3.4 - 3.6 litres to 25kg bag - yield approx. 12 litres
Initial set: Approximately 6 hours
Pack size: 25kg
Shelf life: 12 months if kept in a dry store in sealed bags. If stored in high temperature and high humidity locations the shelf life will be reduced.
Please refer to the product Data Sheet for more technical information. Contact us to request a copy.
Mixing
Add water as per instructions on the product data sheet.
Cleaning
Conbextra GP should be removed from tools and equipment with clean water immediately after use. Cured material can be removed mechanically, or with Fosroc Acid Etch*.
Limitations
Should not be placed in any unrestrained situation. However, can be used for bolt holes or pockets. For further details please contact us.
Safety
- Conbextra GP is alkaline and should not come into contact with skin and eyes
- Avoid inhalation of dust during mixing
- Gloves, goggles and dust mask should be worn
- If contact with skin occurs, wash with water
- Splashes to eyes should be washed immediately with plenty of clean water and medical advice sought
Refer to the product Data and Safety Sheets for further details or contact us for free advice.