Notes:
1.Please check whether it is fit your vehicle before purchase.
2.If your shipping address is not to US, we will ship from CN stock, items will be shipped from our warehouse in South China.

This item is compatible with universal vehicles: Car, SUV, ATV, VAN, Pickup Truck, Bus, Wagon, Motorcycle etc. (Please confirm plug type of your vehicle,Thank you! )

S2 Series LED Headlamps
Plug Type: 9005+9006+9145
Power:1900W/set(850W/bulb)
LED Quantity(each bulb): 2pcs* Chips
Luminous Flux: 285000lm/set(142500lm/bulb)
Operating Voltage: DC 9-32V(fit 12V,24V vehicles)
Color Temperature: Pure White 6000K
IP68 rated water and dust seal,360 degree beam angle
Material: Aviation 6063 aluminum profile
Operating Temperature: -40-80 degree Celsius
Over 50000 hours life time
Usage: High + Low Beam Headlight + Fog Light Combo

(6pcs/set)9005+9006+9145 LED headlight conversion kit

▲300% brighter than stock halogen, designed to enhance your visibility and driving safety at night and bad weather.

▲Latest 2-side COB LED light source, 360 degree beam angle ,super bright without blind zone.

▲Smart cooling system with 12,000RPM turbo cool fan provide super cooling ability, which ensures a longer lifespan up to 5,0000 hours.

▲Upgrade driver, built-in constant current CPU,instant full brightness without start-up relay

▲IP68 waterproof rate provided your safety driving especially in extreme weather like rain/snow/fog

▲Low Power Consumption than Halogen bulb, Energy Saving

▲Low Voltage Protection, High Precision Constant Current driver Chip

▲10 Minutes Quick Installation. No tools needed to replace the lower profile LED bulb. Ridroid LED bulbs are perfectly fit your vehicle even factory housing has a dust cover or there is limited space on the passenger side, only need 10 minutes.

Package Included:
2x 9005 LED headlight bulb

2x 9006 LED headlight bulb

2x 9145 LED Fog Light bulb

Notes:
1. For Chevy Silverado 2001-2007, the factory brackets for the adjustment screws won't allow the back cooling fan of the bulb to fit. You need to cut headlight support brackets to make the bulbs fit.
2.For Dodge RAM vehicles, when installing these headlights, you need to drill a hole on dust cover for the cooling fan. It's also OK if you don't use dust cover, cause our led bulb is waterproof and dust proof.
3. For Dodge, Jeep, Chrysler, after install our LED Headlight bulbs, if the bulb flicker or have error code, you can buy a decoder resistor to solve it

Automotive LED headlamps advantages:

1. LED lights than traditional halogen energy, more power.
2. Xenon lamp brightness and proximity , but the LED lights light up without delay, to enhance road safety. Instant start no strong currents impact , effectively protecting the car comes with a battery , improving battery life of more than 30%.
3. Fast cooling , the appearance of the most advanced design , thermal structure ingenious and reasonable.Less warranty, power driver with wide voltage constant current mode , the car can respond to a variety of voltage instability , the effective protection of normal use Led efficient and simple structure . Fewer Components damaged, repair the probability is very low , compared with HID ballast repair lower than 80% .
4. Heating temperature is low , protect the car . Xenon working temperature up to 800 ° -1000 ° , the main reason for the car ignition .
5. LED car headlights simple structure, fewer parts than xenon lamps, significantly lower than the xenon lamp failure rates !
6. Automotive LED headlamps color temperature balancing. The Xenon bulbs in the same color to clear , about 6000K.

Install Caution

1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Make sure to have the ignition turned off and the keys removed.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.