Application

It is suitable for study room, lounge, theme restaurant, office area, tea house, etc.

Installation

1. Put the light on the water pump.

2. Push the light on the water pump to the top.

3. Connect the lower pipe to the water pump.

4. Just add water to the water pump.

5. Connect the pump and put it inside the product.

6. Put the atomizer head in the sink.

7. Connect the atomizer connector and transformer.

8. Just plug in the transformer plug.

Atomizer Installation

1. Find the atomizer.

2. Put the atomization head in the sink.

3. Connect the atomizer connector to the transformer.

4. Plug the transformer into the power.

The Use of The Atomizer

• When the nebulizer is running, the atomizer's head should not leave the water surface.
• Do not touch the atomization chip with your hands when the atomizer is running.
• Please use clean water, do not use turbid water.
• It is best not to use more than 10 hours a day.
• The atomization chip is a wearable part with a service life of about 3000 hours.
• If you find that the amount of fog is reduced, please use cotton swabs or soft surface cleaning atomization chip.

The Use of Water Pump

1. Pumps cannot be operated without water.

2. If the water output is found to be reduced, see if the pump valve has been adjusted to the maximum.

3. When the pump is exposed to the water, please add water to flood the pump in time.

4. After a long time of use, please clean the scale inside the pump.

5. It is recommended that the water pump is not open 24 hours to extend the service life of the pump.

Specification

Style: Rustic

Color: Multicolors

Rockery Water Fountain Material: Resin

Ice Crack Ball Material: Glass

Placement Position: Desktop 

Plug: US Plug

Voltage: 110V

Light Source: LED (3 Colors)

Product Size: 26*20*28cm/ 10.24*7.87*11.02in

Package Size: 32*25*32cm/ 12.6*9.84*12.6in

Gross Weight: 2.8kg/ 6.17lbs

Package Included

1* Rockery Water Fountain

1* Ice Crack Ball

1* Stone Mill

1* Atomizer

1* Water Pump

Notes

•  If the ball does not rotate, it may be that the product is not lying flat. It is recommended to pad the unevenness at the bottom of the product with a gasket until the ball rotates. If the stone does not rotate, you can plug the hose with a sponge until the stone can turn.
• The pump should be placed in the water and the water level should exceed the pump.
• When installing, the water pump valve should be opened to the maximum.
• After installation, make sure that the water pipe cannot be bent.
• Please allow the slight color difference caused by the shooting light and 1-3 cm error due to manual measurement, and make sure you do not mind before ordering.