🚗 SEAT LEON MK2 / ALTEA / ALTEA XL / TOLEDO MK3 REAR HANDBRAKE CABLE PAIR – LEFT & RIGHT
Replacement rear handbrake cable pair for selected SEAT Leon Mk2, SEAT Altea, Altea XL and Toledo Mk3 vehicles manufactured between 2004 and 2015.
Supplied as 2 handbrake cables, intended for rear left and rear right parking brake applications where the original cable references, dimensions and end fittings match.
Suitable for replacing worn, seized, stretched or damaged mechanical parking brake cables on compatible vehicles.
✔ 1 × Rear Left Handbrake Cable
✔ 1 × Rear Right Handbrake Cable
TOTAL: 2 HANDBRAKE CABLES – COMPLETE REAR PAIR
Brake calipers, handbrake levers and additional fitting hardware are not included unless specifically supplied.
Product Type: Handbrake / Parking Brake Cable
Fitting Position: Rear Left & Rear Right
Quantity: 2 Pieces
Selling Unit: Pair
Length 1 / Length 2: 1450 / 810 mm
Vehicle Make: SEAT
Vehicle Models: Leon Mk2 / Altea / Altea XL / Toledo Mk3
Primary OE Reference: 1K0609721Q
1K0609721AA
1K0609721Q
1K0609721J
1K0609651C
1K0609721AT
1K0609721T
1K0609721S
1K0609721BE
1K0609721BB
These are supplier-provided OE cross-reference numbers for identification purposes.
Please compare the original handbrake cable references before ordering.
The product should not be described as genuine SEAT unless its manufacturer and authenticity are confirmed.
The following vehicles and engine variants are potential applications based on the supplied compatibility catalogue.
Petrol Engines
1.2 TSI – 105 PS – 2010–2012
1.4 16V – 86 PS – 2006–2012
1.4 TSI – 125 PS – 2007–2012
1.6 – 102 PS – 2005–2012
1.6 LPG – 102 PS – 2009–2012
1.6 MultiFuel – 102 PS – 2005–2013
1.8 TSI – 160 PS – 2007–2012
2.0 FSI – 150 PS – 2005–2010
2.0 TFSI – 185 / 200 / 211 / 240 PS – selected 2005–2012 applications
2.0 Cupra R – 265 PS – 2009–2012
Diesel Engines
1.6 TDI – 90 / 105 PS – 2010–2012
1.9 TDI – 90 / 105 PS – 2005–2010
2.0 TDI – 136 / 140 / 170 PS – selected 2005–2012 applications
2.0 TDI 16V – 140 PS – 2005–2012
Petrol Engines
1.2 TSI – 105 PS – 2010–2015
1.4 16V – 86 PS – 2006–2011
1.4 TSI – 125 PS – 2007–2015
1.6 – 102 PS – 2004–2010
1.6 LPG – 102 PS – 2009–2013
1.8 TFSI – 160 PS – 2007–2015
2.0 FSI – 150 PS – 2004–2009
2.0 TFSI – 200 PS – 2006–2009
Diesel Engines
1.6 TDI – 90 / 105 PS – 2009–2015
1.9 TDI – 90 / 105 PS – 2004–2010
2.0 TDI – 136 / 140 / 170 PS – selected 2004–2015 applications
2.0 TDI 16V 4WD – 140 PS – catalogue-listed from 2010
Petrol Engines
1.2 TSI – 105 PS – 2010–2015
1.4 16V – 86 PS – 2006–2013
1.4 TSI – 125 PS – 2007–2015
1.6 – 102 PS – 2006–2010
1.6 LPG – 102 PS – 2009–2013
1.6 MultiFuel – 102 PS – 2006–2010
1.8 TFSI – 160 PS – 2007–2015
2.0 FSI – 150 PS – 2006–2009
2.0 TFSI – 200 / 211 PS – selected 2006–2015 applications
2.0 TFSI 4x4 – 200 / 211 PS – selected applications
Diesel Engines
1.6 TDI – 90 / 105 PS – 2009–2015
1.9 TDI – 90 / 105 PS – 2006–2010
1.9 TDI 4x4 – 105 PS – 2009–2010
2.0 TDI – 136 / 140 / 170 PS – selected 2006–2015 applications
2.0 TDI 16V 4x4 – 140 PS – 2010–2015
2.0 TDI 4x4 – 140 / 170 PS – selected applications
Petrol Engines
1.4 16V – 86 PS – 2006–2009
1.4 TSI – 125 PS – 2007–2009
1.6 – 102 PS – 2004–2009
1.8 TFSI – 160 PS – 2007–2009
2.0 FSI – 150 PS – 2004–2009
2.0 TFSI – 200 PS – 2005–2009
Diesel Engines
1.9 TDI – 105 PS – 2004–2009
2.0 TDI – 136 / 140 / 170 PS – selected 2004–2009 applications
2.0 TDI 16V – 140 PS – 2004–2009
The vehicles above are potential applications based on the supplied compatibility catalogue.
Different SEAT Leon, Altea and Toledo models may require different handbrake cables depending on production date, drivetrain, rear brake system and cable end fittings.
Not every listed vehicle is guaranteed to use the same handbrake cable pair.
Please verify the original cable references and dimensions before ordering, particularly for Cupra, 4WD and performance variants.
✔ 2 × Rear Handbrake Cables
✔ Rear Left & Right Pair
✔ Replacement Parking Brake Cables
✔ Supplier-Listed 1450 / 810 mm Dimensions
✔ Selected SEAT Leon Mk2 Applications
✔ Selected SEAT Altea Applications
✔ Selected SEAT Altea XL Applications
✔ Selected SEAT Toledo Mk3 Applications
✔ Selected Petrol and Diesel Engines
✔ Multiple SEAT OE Cross-Reference Numbers
Worn or damaged handbrake cables may contribute to:
Parking brake not holding correctly
Excessive handbrake lever travel
Sticking or seized handbrake operation
Uneven rear parking brake engagement
Damaged or corroded cable outer casing
Parking brake failing to release correctly
These symptoms can have other causes. Inspection of the complete parking brake system is recommended before replacing components.
Before ordering or fitting, please confirm:
✔ Vehicle make and model
✔ Vehicle production year
✔ SEAT Leon Mk2, Altea or Toledo Mk3 generation
✔ Rear left and right fitting positions
✔ Original handbrake cable OE references
✔ Cable lengths and outer casing dimensions
✔ Cable end fittings and mounting points
✔ Rear brake system configuration
Vehicle model, engine size and registration year alone do not guarantee compatibility.
Professional installation is recommended.
After fitting, the parking brake system should be inspected, adjusted where required and tested according to the manufacturer's servicing procedures.
Please send your UK vehicle registration number or VIN, together with the original handbrake cable reference where available, so the correct application can be checked.
We recommend confirming compatibility before purchasing to avoid ordering an incorrect handbrake cable pair.