🚗 FRONT LOWER SUSPENSION BALL JOINTS – LEFT & RIGHT PAIR
Quality replacement Front Lower Suspension Ball Joints, supplied as a pair of 2 for the front left and right suspension positions.
Intended for selected SEAT Ibiza Mk5 (KJ1) and SEAT Arona (KJ7) vehicles from 2017 onwards.
These suspension ball joints connect the lower suspension control arms to the steering knuckle assemblies, allowing controlled steering and suspension movement while helping maintain correct wheel positioning.
Suitable for replacing worn, damaged or deteriorated front lower suspension ball joints where the original equipment references and mounting dimensions match.
✔ 1 × Front Left Lower Suspension Ball Joint
✔ 1 × Front Right Lower Suspension Ball Joint
Total Quantity: 2 Pieces – Complete Front Pair
Additional fixing bolts, nuts and mounting components are included only where supplied with the actual product.
Product Type: Suspension Ball Joint
Alternative Names: Lower Ball Joint / Suspension Arm Ball Joint
Fitting Position: Front Axle Lower
Placement: Front Left & Front Right
Quantity: 2 Pieces
Pack Size: Pair
Vehicle Make: SEAT
Vehicle Models: Ibiza Mk5 / Arona
Chassis Codes: KJ1 / KJ7
Vehicle Years: Selected 2017–2026 applications
The following are potential applications based on the supplied vehicle compatibility catalogue.
Exact fitment must be confirmed against the original part references, mounting dimensions and suspension configuration.
Petrol Engines
1.0 Petrol – 65 PS (from 2017)
1.0 Petrol – 75 PS (from 2017)
1.0 MPI – 80 PS (from 2018)
1.0 TSI – 95 PS (from 2017)
1.0 TSI – 110 PS (from 2020)
1.0 TSI – 115 PS (from 2017)
1.5 TSI – 150 PS (from 2017)
1.6 Petrol – 110 PS (from 2017)
Diesel Engines
1.6 TDI – 80 PS (from 2017)
1.6 TDI – 95 PS (from 2017)
1.6 TDI – 115 PS (from 2017)
Additional Fuel Variant
1.0 TGI CNG – 90 PS (from 2017)
Petrol Engines
1.0 TSI – 95 PS (from 2017)
1.0 TSI – 110 PS (from 2020)
1.0 TSI – 115 PS (from 2017)
1.5 TSI – 150 PS (from 2017)
1.6 SRE Petrol – 110 PS (from 2017)
Diesel Engines
1.6 TDI – 95 PS (from 2017)
1.6 TDI – 115 PS (from 2017)
Additional Fuel Variant
1.0 TGI CNG – 90 PS (from 2018)
The vehicles listed above are potential applications from the supplied compatibility catalogue.
Different SEAT Ibiza Mk5 and Arona models may use different lower suspension ball joints depending on production year, engine variant and suspension configuration.
Please confirm the original equipment references and mounting dimensions before ordering.
✔ Replacement front lower suspension ball joints
✔ Supplied as a pair for front left and right positions
✔ Designed to allow controlled steering and suspension movement
✔ Help connect the lower suspension arms to the steering knuckle assemblies
✔ Suitable for replacing worn or damaged suspension joints where fitment is confirmed
✔ Intended for selected SEAT Ibiza and Arona suspension applications
✔ 2x Front Lower Suspension Ball Joints
✔ Front Left & Front Right Pair
✔ Front Axle Lower Fitting Position
✔ Selected SEAT Ibiza Mk5 (KJ1) applications
✔ Selected SEAT Arona (KJ7) applications
✔ Selected petrol and diesel applications
✔ Replacement front suspension components
✔ Suitable for suspension repairs where specifications match
Worn or damaged lower suspension ball joints may contribute to:
Knocking or clunking noises from the front suspension
Excessive movement in suspension joints
Uneven tyre wear
Steering looseness or instability
Changes in wheel alignment
Unusual suspension movement
These symptoms can have several causes. Professional inspection is recommended before replacing suspension components.
Before ordering, please check:
✔ Vehicle make, model and production year
✔ SEAT chassis code – KJ1 / KJ7
✔ Original suspension ball joint part number
✔ Front lower suspension fitting position
✔ Ball joint mounting dimensions
✔ Suspension arm design and fixing arrangement
✔ Vehicle suspension configuration
✔ Whether new fixing bolts or nuts are required
This listing includes TWO front lower ball joints – one left and one right.
Professional installation is recommended. Follow the manufacturer's fitting instructions and tightening torque specifications.
Wheel alignment should be checked following suspension repairs where required.
Please send us your UK vehicle registration number or VIN before ordering so the correct suspension ball joint application can be checked.
We recommend confirming compatibility before purchasing to ensure the correct replacement components are selected for your vehicle.