
Run by qualified audiologists·30-day returns·Tracked delivery

Keep your Phonak hearing aids securely in place during everyday wear and active movement. Phonak Retention Locks - also called sport locks - are small flexible arms that slide onto your existing receiver wire and loop discreetly into the bowl of your ear. They stop the receiver and dome working their way out of the ear canal during talking, chewing, sport, or any vigorous movement.
Pack of 10, sized for Medium (M) power receivers. If your receiver tip is marked with an "M", this is the correct retention lock.
Phonak and Unitron retention locks come in three sizes - Standard (S), Medium (M), and Power (P). Look at the small letter printed on your receiver tip to find the right row below.
| Size | Fits receivers | Status |
|---|---|---|
| Medium (M) | If your receiver tip shows a small "M", this is your size. Fits Medium power receivers across SDS 6.0 / 5.0 / 4.0 generations - the same retention lock covers all three SDS generations. Used on Phonak Audéo Infinio Ultra / Sphere Infinio, Lumity (including Life/Slim), Paradise, and Marvel, and matching Unitron RIC devices fitted for moderate-to-severe hearing loss. Show all compatible models Phonak Audéo Infinio Ultra & Sphere Infinio with M receivers (current ranges) Phonak Audéo Lumity (including Life/Slim), Paradise, and Marvel with M receivers (SDS 4.0 / 5.0) Phonak Bolero / Naída / Sky RIC variants on these platforms with M receivers Unitron Moxi Vivante / Blu / Discover Next with M receivers Costco Kirkland Signature KS9 / KS10 and Specsavers Advance Phonak-platform RICs with M receivers Note: M is the most commonly fitted receiver power. The S/M/P letter is printed on the receiver tip where the dome attaches. The number prefix (00 / 0 / 1 / 2 / 3) is receiver length and does not affect retention lock fit. | You’re here |
| Standard (S) | If your receiver tip shows a small "S", you need a different size. Fits Standard power receivers across SDS 6.0 / 5.0 / 4.0 - mild to moderate hearing loss fittings. Show all compatible models Same Phonak / Unitron platform compatibility as Medium, but specifically for receivers marked "S". The Standard retention lock is sized for the smaller Standard receiver body. | View Standard (S) → |
| Power (P) | If your receiver tip shows a small "P", you need a different size. Fits Power (high-output) receivers across SDS 6.0 / 5.0 / 4.0 - severe to profound hearing loss fittings. Show all compatible models Same Phonak / Unitron platform compatibility as Medium, but specifically for receivers marked "P". Power receivers are physically larger to deliver more output, and the Power retention lock is sized to match. | View Power (P) → |
A retention lock slides onto the end of the receiver wire (just behind where the dome sits). It then loops gently into the bowl of your ear (the concha) to anchor the hearing aid in place. Fitting takes about a minute.
Cold tip: If the locks feel stiff out of the pack (especially in cold weather), warm them in a pocket or near a radiator for 10 minutes before fitting. The plastic becomes more pliable and easier to shape.
Retention locks are reusable - they don't have a fixed replacement schedule like wax filters. Most users get 6-12 months from a single lock before the plastic loses its spring or starts to crack.
Replace your retention lock when you notice:
Care tips:
Active wearers (sport, outdoor work) may go through locks faster as the plastic flexes more often. If you're particularly active, our pack of 10 gives you spares without committing to bulk packs.
Storage tip: Keep the unused locks in their original packaging at room temperature. Cold storage can stiffen the plastic and make pre-shaping harder.
Each lock fits one hearing aid - so a pair of hearing aids uses two locks at a time. With normal wear, a pack of 10 covers about 5 years of replacements for most users.
Are these genuine Phonak?
Yes. These are official Phonak-branded retention locks, sourced through authorised channels.
How do I know if I need Standard, Medium, or Power?
Look at the very tip of your receiver wire (where the dome attaches). There will be a small letter printed on it: S = Standard, M = Medium, P = Power. The letter matches your hearing loss fitting - it was set by your audiologist when the aid was prescribed. Match it exactly. If you can't see a letter at all, the receiver may be older xReceiver style (pre-2019) and need a different retention lock product.
Will this fit my Phonak Audéo Infinio Ultra or Sphere Infinio (SDS 6.0)?
Yes - if your receiver is marked S. Phonak uses the same retention lock parts across SDS 4.0, 5.0, and 6.0 generations. The part is sized by receiver power (S/M/P), not by SDS generation.
Will this fit my older Phonak Marvel / Paradise / Lumity (SDS 4.0 or 5.0)?
Yes - if your receiver is marked S. The same retention lock fits all three SDS generations. What matters is the size letter on the receiver, not the platform.
Will this fit Unitron hearing aids?
Yes. Unitron and Phonak share the Sonova receiver platform - the same retention locks fit Unitron Moxi Vivante, Blu, Discover Next, and Discover devices. Check for the S/M/P letter on the receiver tip.
Will this fit older Phonak xReceiver aids (Audéo Q / V / B)?
No. Older xReceiver wires (2-pin connector, pre-2019) have a different physical shape and need a different retention lock product. Tell us your hearing aid model and we'll point you to the right one.
Can I shape it to my ear?
Yes. The retention arm is pre-shapeable - slide it gently over a smooth, firm edge (the spine of a hardback book works well) to curve it before fitting. If it's stiff, warm it in a pocket for 10 minutes first. The plastic holds its new shape but you can re-shape if needed.
How often do I need to replace them?
Retention locks last 6-12 months for most users before the plastic loses spring or cracks. They're not single-use like wax filters - the pack of 10 typically covers 5+ years of replacements.
What information do you need from me?
Your hearing aid make and model (for example, "Phonak Audéo Infinio Ultra I90-R" or "Unitron Moxi Vivante 9"), and the receiver size letter if you can see it. A photo of the receiver tip works just as well.
Can I use these on Oticon, Widex, GN ReSound, or other brands?
No. These are Sonova-specific retention locks, designed to fit Phonak and Unitron receivers only. Other brands have their own retention systems with different shapes - check the manufacturer's accessory range.
What warranty covers this accessory?
Whatever the manufacturer's position, you are covered twice with us: our 30-day returns policy, and your statutory consumer rights, which run against us as the retailer. Phonak's manufacturer warranty covers the hearing aid itself and explicitly does not extend to consumable accessories such as receivers, tubes, and domes - so the protection that matters for this item is ours, above.
Phonak and SDS (Sound Delivery System) are trademarks of Sonova AG.
EarX is an independent retailer. The products we supply are genuine Phonak, sourced through authorised channels.