eBay

PRODUCT DESCRIPTION

DSPIAE | PT-AR

4-Slot Airbrush Rack with Bench Clamp

Four airbrushes off the desk, cups level, nozzles cradled — and within reach of your painting hand.

⚠️ Clamps to a desk edge up to 55 mm thick

The rack mounts with a G-clamp onto the edge of your bench or desk. Check that your worktop is 55 mm thick or less and has an edge you can clamp to before ordering.

🎯 Why this one is different

An airbrush laid on the desk is an accident waiting to happen. It rolls, the cup tips and paint goes across the cutting mat, or the hose drags it off the edge and the needle tip meets the floor. A bent needle or a cracked nozzle costs more than this rack.

The PT-AR gives each airbrush a proper place to sit. The slots are angled so colour cups stay level, which means you can rack an airbrush mid-session with paint still in the cup. Curved slot lips follow the shape of the nozzle end, so the airbrush sits in the slot rather than balancing on it.

It clamps to the edge of the bench, swivels a full 360° and adjusts 30 mm in height, so you can put it exactly where your hand goes — next to the booth, beside the palette, on whichever side you paint from.

📦 What's in the box

✔ 1 × DSPIAE PT-AR 4-slot airbrush rack with G-clamp bench mount

Worth being clear about: this is the rack only. Airbrushes, hoses and compressor are not included.

✅ How it is built

▪ Four slots. Room for a fine-detail airbrush, a general-purpose one, a varnish airbrush and one spare — or four colours on the go at once.

▪ Cup-level slot angle. The angle keeps colour cups horizontal so paint stays in the cup rather than running out of it.

▪ Curved slot lips. Shaped to the nozzle end, to reduce the risk of the airbrush slipping out and dropping.

▪ Easy in, easy out. An auxiliary angle on each slot makes putting the airbrush in and lifting it out smoother — one hand, no fiddling.

▪ Adjustable G-clamp mount. 360° swivel, 30 mm height adjustment and a movable locking mechanism. Fits bench edges up to 55 mm thick.

▪ Mixed materials, chosen for the job. ABS, aluminium alloy, zinc alloy and iron. The ABS and aluminium parts will not corrode from paint and cleaner splashes.

🔗 What it holds

Airbrush type	Fit
Button type dual-action, gravity feed	Designed for it. The usual modelling airbrush with a top-mounted cup.
Trigger type	Designed for it as well. The slots take pistol-grip airbrushes too.
Bottom-feed / jar airbrushes	The slot angle is set for top cups. If you use a siphon jar, take the jar off before you rack the airbrush.

💡 Getting the best from it

1. Mount it on your painting-hand side. The point is to put the airbrush down without looking. Put it where your hand naturally goes when you stop spraying.

2. Leave slack in the hose. A tight hose pulls the airbrush out of the slot. Let it hang in a loose loop below the rack.

3. Cap the tip. If your airbrush has a needle cap or crown cap, keep it fitted while racked. It protects the needle if you knock the rack.

4. Do not leave paint in the cup for long. Racked mid-session is fine. Racked overnight with acrylic in the cup means dried paint in the nozzle in the morning.

5. Clamp it firmly, then check. Tighten the clamp, rack one airbrush and give the rack a gentle nudge before trusting it with all four.

📏 Specifications

Brand	DSPIAE
Model	PT-AR
Type	Clamp-on airbrush rack
Capacity	4 airbrushes
Compatible with	Button-type and trigger-type airbrushes
Mounting	G-clamp, bench edge
Max. bench thickness	55 mm
Adjustment	360° swivel, 30 mm height
Materials	ABS, aluminium alloy, zinc alloy, iron
Dimensions	200 × 150 × 90 mm
Weight	223 ± 3 g
EAN	6977151541192

⚖️ Worth knowing — honest limitations

It needs a desk edge. This is a clamp-on rack. Worktops over 55 mm thick, or desks with a lip or frame right under the edge, may not take the clamp.

Airbrushes only. Four slots shaped for airbrushes. It does not hold paint pots, cleaning pots or the hose itself.

Set up for top cups. Gravity-feed airbrushes sit with the cup level. Jar-fed airbrushes are better racked with the jar removed.

Some metal parts are iron. The ABS and aluminium parts shrug off splashes, but wipe solvent cleaner off the clamp rather than leaving it to dry.

🚚 Dispatch & delivery

✅ Same-day dispatch on orders placed before 3 PM, Monday to Friday

✅ Sent tracked from our unit in Derby, UK — no import charges, no customs delays

✅ Packed properly. Tools travel in protective packaging, not a bare envelope

✅ Not sure it will fit your desk or your airbrushes? Message us — we airbrush ourselves and we will give you a straight answer

Hobby Heaven

By Hobbyists. For Hobbyists.

A family-run UK model and miniature supplier. We use the tools we sell, and we will tell you when something is not right for the job you have described.

DSPIAE | PT-AR 4-Slot Airbrush Rack with Bench Clamp Four airbrushes off the desk, cups level, nozzles cradled — and within reach of your painting hand. ⚠️ Clamps to a desk edge up to 55 mm thick The rack mounts with a G-clamp onto the edge of your bench or desk. Check that your worktop is 55 mm thick or less and has an edge you can clamp to before ordering. 🎯 Why this one is different An airbrush laid on the desk is an accident waiting to happen. It rolls, the cup tips and paint goes across the cutting mat, or the hose drags it off the edge and the needle tip meets the floor. A bent needle or a cracked nozzle costs more than this rack. The PT-AR gives each airbrush a proper place to sit. The slots are angled so colour cups stay level, which means you can rack an airbrush mid-session with paint still in the cup. Curved slot lips follow the shape of the nozzle end, so the airbrush sits in the slot rather than balancing on it. It clamps to the edge of the bench, swivels a full 360° and adjusts 30 mm in height, so you can put it exactly where your hand goes — next to the booth, beside the palette, on whichever side you paint from. 📦 What's in the box ✔ 1 × DSPIAE PT-AR 4-slot airbrush rack with G-clamp bench mount Worth being clear about: this is the rack only. Airbrushes, hoses and compressor are not included. ✅ How it is built ▪ Four slots. Room for a fine-detail airbrush, a general-purpose one, a varnish airbrush and one spare — or four colours on the go at once. ▪ Cup-level slot angle. The angle keeps colour cups horizontal so paint stays in the cup rather than running out of it. ▪ Curved slot lips. Shaped to the nozzle end, to reduce the risk of the airbrush slipping out and dropping. ▪ Easy in, easy out. An auxiliary angle on each slot makes putting the airbrush in and lifting it out smoother — one hand, no fiddling. ▪ Adjustable G-clamp mount. 360° swivel, 30 mm height adjustment and a movable locking mechanism. Fits bench edges up to 55 mm thick. ▪ Mixed materials, chosen for the job. ABS, aluminium alloy, zinc alloy and iron. The ABS and aluminium parts will not corrode from paint and cleaner splashes. 🔗 What it holds Airbrush type Fit Button typedual-action, gravity feed Designed for it. The usual modelling airbrush with a top-mounted cup. Trigger type Designed for it as well. The slots take pistol-grip airbrushes too. Bottom-feed / jar airbrushes The slot angle is set for top cups. If you use a siphon jar, take the jar off before you rack the airbrush. 💡 Getting the best from it 1. Mount it on your painting-hand side. The point is to put the airbrush down without looking. Put it where your hand naturally goes when you stop spraying. 2. Leave slack in the hose. A tight hose pulls the airbrush out of the slot. Let it hang in a loose loop below the rack. 3. Cap the tip. If your airbrush has a needle cap or crown cap, keep it fitted while racked. It protects the needle if you knock the rack. 4. Do not leave paint in the cup for long. Racked mid-session is fine. Racked overnight with acrylic in the cup means dried paint in the nozzle in the morning. 5. Clamp it firmly, then check. Tighten the clamp, rack one airbrush and give the rack a gentle nudge before trusting it with all four. 📏 Specifications BrandDSPIAE ModelPT-AR TypeClamp-on airbrush rack Capacity4 airbrushes Compatible withButton-type and trigger-type airbrushes MountingG-clamp, bench edge Max. bench thickness55 mm Adjustment360° swivel, 30 mm height MaterialsABS, aluminium alloy, zinc alloy, iron Dimensions200 × 150 × 90 mm Weight223 ± 3 g EAN6977151541192 ⚖️ Worth knowing — honest limitations It needs a desk edge. This is a clamp-on rack. Worktops over 55 mm thick, or desks with a lip or frame right under the edge, may not take the clamp. Airbrushes only. Four slots shaped for airbrushes. It does not hold paint pots, cleaning pots or the hose itself. Set up for top cups. Gravity-feed airbrushes sit with the cup level. Jar-fed airbrushes are better racked with the jar removed. Some metal parts are iron. The ABS and aluminium parts shrug off splashes, but wipe solvent cleaner off the clamp rather than leaving it to dry. 🚚 Dispatch & delivery ✅ Same-day dispatch on orders placed before 3 PM, Monday to Friday ✅ Sent tracked from our unit in Derby, UK — no import charges, no customs delays ✅ Packed properly. Tools travel in protective packaging, not a bare envelope ✅ Not sure it will fit your desk or your airbrushes? Message us — we airbrush ourselves and we will give you a straight answer Hobby Heaven By Hobbyists. For Hobbyists. A family-run UK model and miniature supplier. We use the tools we sell, and we will tell you when something is not right for the job you have described.

Specifications

Mounting Clamp-On (G-Clamp)
Compatible With Button-Type and Trigger-Type Airbrushes
Type Airbrush Holder / Rack
Capacity 4 Airbrushes
Max Bench Thickness 55 mm
MPN PT-AR
Item Dimensions 200 x 150 x 90 mm
Features 360° Swivel, Height Adjustable, Cup-Level Slot Angle
Country of Origin China
Item Weight 223 g
Colour Red
EAN 6977151541192

ABOUT US

Welcome to Hobby Heaven!

We're a brand built by passionate hobbyists for hobbyists. Our mission is to support all your creative endeavors, whether you're into modeling, wargaming, crafting, or art. As enthusiasts ourselves, we understand the importance of quality supplies at affordable prices.

Our carefully curated selection of high-quality materials is designed to inspire and empower hobbyists and artists alike. We're particularly proud of our innovative, cost-effective basing system - a game-changer for modelers and wargamers looking for professional results without breaking the bank.

At Hobby Heaven, we're dedicated to providing exceptional customer service and ensuring your creative projects are a success. Our team is always ready to offer advice, share techniques, or help you find the perfect supplies for your next masterpiece.

Thank you for choosing us as your trusted partner in creativity. We're excited to be part of your hobby journey!

PAYMENT

We accept payment by PayPal and Credit / Debit cards entered on eBay only. You must be registered with PayPal or eBay to buy from us.

SHIPPING

We primarily use RM24 for shipping, and we can arrange other courier services upon request. For large international shipments, we utilize FedEx. Once your order has been dispatched, you will receive tracking information. For domestic deliveries, the estimated arrival time is usually 1-4 days.

RETURNS

Please ensure that all items are returned in their original condition. Returns are processed within 1-2 business days of receipt. Refunds are issued minus the original shipping cost. All returns are handled in accordance with eBay's policies.

At Hobby Heaven, we strive to provide our customers with the best possible online shopping experience. Our commitment to excellent customer service extends well beyond the delivery of your order.

We encourage you to reach out with any questions or concerns regarding your purchase. The most convenient way to contact us is through the eBay messaging system.

Our dedicated customer service team responds to messages within 24 hours, Monday through Friday, between 8:00 AM and 3:00 PM GMT.

Your satisfaction is our top priority. We're here to help and look forward to assisting you!

WHAT OUR CUSTOMERS ARE SAYING ABOUT US

Order delivered on time with no issues	smigg-the-mi (92 )
Order delivered on time with no issues	hariali (168 )
Order delivered on time with no issues	hariali (168 )
Order delivered on time with no issues	hariali (168 )
Order delivered on time with no issues	chardun_88 (7 )