Run by qualified audiologists·30-day returns·Tracked delivery

The simple desktop charger for everyday home charging - full charge in around 3.5 hours. Bernafon makes two Charger 1.0 desktop docks. This listing is the miniBTE T R version - for Bernafon miniBTE T R hearing aids (excluding Encanta).
It is a mains-only desktop dock - there is no battery to manage, it stays plugged in and ready at home. There is no pairing or app setup - confirm your aid in the compatibility table, then see How charging works below.
Find your hearing aid below to confirm which Charger 1.0 you need. The row highlighted is what this listing covers.
| Charger 1.0 | For aid style | Compatible with |
|---|---|---|
| miniRITE T R | RIC (rechargeable) | Entra B, Alpha, Alpha XT, Viron, CROS, Zerena miniRITE T R View charger →
|
|
miniBTE T R
| BTE (rechargeable) | Entra B, Alpha, Alpha XT miniBTE T R You’re here |
Charger 1.0 is a mains-powered desktop charger - it sits on your bedside table or desk, permanently plugged in, and is always ready when you drop your hearing aids in.
This charger uses inductive charging - the previous-generation method where the aid and charger transfer power wirelessly through coils, similar to how a phone wireless charger works. Inductive charging is slightly slower than the newer contact method (used by Encanta), but tolerates small alignment differences.
Daily routine
Plug the charger’s fixed USB cable into the mains USB power supply (5 V / 1 A, included). The charger’s green LED shows it is connected and ready. Place your hearing aids in the magnetic charging ports - the magnets pull the aids into the correct position automatically and the aids switch off. From a fully drained battery, expect around 3.5 hours for a full charge of both aids; a 30-minute quick charge takes them to about 20 percent charge (Bernafon’s instructions for use). The aids switch back on automatically when you remove them.
Colour-coded wells
Red marker = right ear, blue marker = left ear. Helps avoid mixing up the aids when docking, especially in poor light or first thing in the morning.
LED status: the charger’s own LED only shows power - green = charger connected and ready (orange blinks on the charger mean it is too warm or too cold to charge). Charging progress shows on each hearing aid’s own LED - orange (or red, depending on the hearing aid family) = charging, green = fully charged.
No power bank: this charger needs to stay plugged into mains. If you want portable charging away from sockets, see our Charger Plus range.
The Charger 1.0 is plug-and-play - there’s no pairing or app setup needed. The hearing aids are recognised by the magnetic charging contacts as soon as you place them.
First setup
Daily charging routine
Where to keep it
This charger is designed for a fixed home location - bedside table, desk, or vanity. The cable runs to a wall socket. There’s no internal battery, so it must stay plugged in to work. For travel, see our Charger Plus range (built-in power bank).
Care: wipe the charger and aids dry before docking. Never wash the charger or immerse it in water. Keep the charging contacts clean of dust with a dry cloth - no liquids. Store somewhere dry and not too cold (below +5°C the charger will pause for safety).
Note: hearing aids are not included - this is a charger only. Sold as a replacement or backup charger for users who already own compatible Bernafon miniBTE T R hearing aids.
Is this genuine Bernafon?
Yes. This is the official Bernafon Charger (1.0) sourced through authorised channels - not a third-party copy or refurbished unit.
What’s the difference between Charger 1.0 and Charger Plus?
The Charger 1.0 is a mains-only desktop dock - simpler, sits on your bedside table, always plugged in. The Charger Plus has a built-in lithium-ion power bank for charging away from sockets (3 full charges off mains) plus a protective lid for travel. They do not charge exactly the same aids, so check the compatibility list on each page before you choose. Pick Charger 1.0 if you mostly charge at home; pick Charger Plus if you travel or want backup power.
How do I know if I have a miniBTE T R hearing aid?
“miniBTE T R” is the BTE (Behind-The-Ear) style with a built-in rechargeable battery. The model name is usually on the original box or in your audiologist’s paperwork.
Why can’t I use a different Charger 1.0 from the family?
miniRITE T R and miniBTE T R use different charging well shapes. The aids will not seat correctly on the wrong charger - the magnets won’t align and the contacts won’t make connection. See the comparison table above.
How long until my aids are charged?
Around 3.5 hours for a full charge from empty. A 30-minute quick top-up takes the aids from empty to about 20 percent charge (Bernafon’s instructions for use). The aids switch off when seated and switch on when removed - no buttons to press.
Can I take this charger travelling?
It’s small enough to pack but it has no battery - you must plug it into mains for it to work. If you’re flying with hearing aids and want charging-on-the-go, the Charger Plus (with built-in power bank for 3 full charges away from mains) is the better choice. UK 3-pin plug supplied; you’ll need a travel adapter for non-UK sockets.
Will it fit my Oticon or Sonic rechargeable aids?
Possibly: Oticon and Sonic are Bernafon's sister brands, and some of their rechargeable aids use the same charging interface. If you have an Oticon or Sonic aid, check your model is in the compatibility list above: not every current rechargeable aid charges on this charger (Oticon Intent and Bernafon Encanta take their own chargers). If you're not sure, send us the model name and we'll confirm before you buy. Different manufacturers' chargers (Phonak, Widex, Signia, ReSound, Starkey) are not interchangeable - those are entirely separate platforms.
What if my charger LED doesn’t come on?
Check the cable’s USB plug is firmly seated in the power supply, and the supply is in a working mains socket. The cable is fixed to the charger so it cannot be swapped - try a different USB power supply or socket if you have one. If the LED still doesn’t light, contact us for a replacement.
What information do you need from me before purchase?
Just your hearing aid model name (for example, “Bernafon Alpha 1 miniBTE T R”). We’ll confirm Charger 1.0 compatibility before you buy. If you’re unsure, send a photo of the aid or the original box and we’ll work it out.
What warranty covers this accessory?
Whatever the manufacturer's position, you are covered twice with us: our 30-day returns policy, and your statutory consumer rights, which run against us as the retailer. Bernafon chargers carry their own manufacturer warranty, separate from the hearing aid's own cover - the term is stated on the warranty certificate supplied with the charger; if you ever need it, message us and we will help route the claim.
Bernafon and Charger Plus are trademarks of Bernafon AG, a Demant-group company.
EarX is an independent retailer. The products we supply are genuine Bernafon, sourced through authorised channels.