Removed from an EMTB bike that was barely ridden- in outstanding condition and fully working.
Front specs:
Designed specifically as an eMTB front light, it draws power directly from the bike’s battery and motor system, giving you a cleaner setup and a more integrated feel on the trail.
The Flex utilises our REFLEX ++ technology for smarter battery management, and is fitted with wired remote for easy mode changes. Fitment is from a new single sided reinforced nylon bracket, this allows for central mounting position on the bike.
Motor Compatability : 6v/12v Bosch, Shimano, Brose, Yamaha LED Configuration : 3 x White XHP35 Lumens : Upto Max 3300 (Dependent on your battery and motor configuration) Battery : N/A Runtime : N/A Rechargeable : N/A Charge Time : 8 hours Weight : 60g Material : Anodised 6063 Aluminium Water Resistance : IP6 Length : 34mm Head Diameter : 45mm Cable Length : 135cm
LED e-bike light, the Flex is our e-mtb orientated light with a possible output of up to 3300 lumens in a lightweight and compact unit. Powered via the battery/motor system, this allows you to do away with the traditional onboard battery system. The Flex utilises our REFLEX ++ technology for smarter battery management, and is fitted with wired remote for easy mode changes. Fitment is from a new single sided reinforced nylon bracket, this allows for central mounting position on the bike.
Rear Specs:
A RedEye for the e-Bike, Powered directly from your E-Bike battery so you only need to change your E-Bike up. Designed for day and night time running, excellent side visibility for urban or trail riding. By using just a single LED we are able to design a lens to get the beam going where it needs to. This means maximising the output from the LED in a way to make sure you are seen, no matter where you are. Visibility from over 1 kilometre away, and a 240 degree halo of red light behind.
Product Compatibility: check with motor manufacturer
Light: Solid - runs from the motor
Input voltage: 6V / 12V (depending on motor)
Current draw: 0.13A / 0.7W @ 6V or 0.75A / 0.35W @ 12V
Cable Length: 1.05 metres (this is fixed and we do not provide different lengths. The cable is hard-wired into the light and cannot be removed. It is possible to cut and splice the cable, but this should be done by a qualified e-bike mechanic.)
Light length: 43.3mm
Head diameter: 27.1mm
Body diameter: 18mm
Weight (light and cable): 44.4g
Cable has bare wire ends, for connecting to e-bike motors using manufacturer-specific connectors
Includes moulded bracket for round seat posts
M4 threaded hole allowing for more versatile mounting options
You can purchase the correct adapter for either the smart system or system 2 Bosch motors and probably others- check out Exposure retailers for more details- Leisure lakes for example.