Run by qualified audiologists·30-day returns·Tracked delivery

Genuine Phonak Charger Combi BTE 2 - for Phonak Naída L-PR / P-PR and siblings. This is a mains-powered charger - it charges your hearing aids while connected to power. Combinable with the Phonak Power Pack (sold separately) when travelling.
It is a mains-powered charger for BTE aids - add the clip-on Power Pack (sold separately) for on-the-go charging. Setup is plug in and seat the aids in their slots - confirm your aid in the compatibility section, then see How charging works below.
Charges:
Grouped by hearing aid generation, oldest to newest. Find your generation, then your aid; the chargers beside it are the ones that fit. Each charger’s own listing carries its full model list.
| Your device | Charger(s) that fit |
|---|---|
| Belong | |
| Audéo B-R | |
| Marvel | |
| Audéo M-R / M-RT | Charge and Care → |
| Bolero M-PR and Sky M-PR | Charger Combi BTE 2You’re here |
| Paradise | |
| Audéo P-R / P-RT / P-Fit and CROS P-R | Charge and Care → |
| Audéo Life P-RL (waterproof) | |
| Naída P-PR | Charger Combi BTE 2You’re here |
| Lumity | |
| Audéo L-R / L-RT / L-Fit and CROS L-R | |
| Slim L-R | |
| Audéo Life L-RL (waterproof) | |
| Naída L-PR and Sky L-PR | Charger Combi BTE 2You’re here |
| Infinio | |
| Audéo Infinio Ultra (I-R) and CROS I-R (I30-R / I50-R / I70-R / I90-R) | |
| Audéo Sphere Infinio | |
| Virto I-R (custom in-the-ear) | Charger Virto Infinio → |
| EON | |
| Audéo E-R, Audéo E-Sphere and CROS E-R (the EON range) | Charger RIC E or ChargerGo RIC I E - we do not stock these yet; your hearing care professional or Phonak can supply them |
| Not tied to a generation | |
| Terra+ RIC-R | |
| Roger Focus II (a Roger receiver, not a hearing aid) | Charger Combi BTE 2You’re here |
| Power Pack - an add-on, not a charger on its own | Power Pack → |
Model codes above are as printed on the aid body and box. Not listed, or not sure? Message us with your model name and we will point you to the right charger.
Mains-powered (charges only while connected to power). Mains-powered; add the clip-on Phonak Power Pack (sold separately) for on-the-go charging - it stores up to 7 full charges. Phonak's published charging milestones: about 30 percent in 30 minutes, 50 percent in 60 minutes, 80 percent in 90 minutes, and a full charge in 3 hours. Facts above are as published by Phonak - message us if you need a detail confirmed before buying.
Connect the supplied power lead - solid green on the charger confirms power. Seat each BTE into its slot (aids switch off automatically, on again at removal).
Reading the lights: solid green = fully charged (and ready for use after removal); blinking = charging in progress (or the aid switching on after removal); blinking red = nearly empty. Full charge takes up to 3 hours.
An optional Power Pack (listed separately) clips on for charging away from the mains.
Power cabling as supplied in the original Phonak packaging. If you need to confirm exact in-box contents before buying, message us and we'll check the batch on the shelf.
Is this a genuine Phonak product?
Yes. This is the official Phonak Charger Combi BTE 2, sourced through authorised channels - not a third-party copy.
Will it work with Phonak Audéo RICs (Infinio Ultra / Lumity / Paradise / Marvel)?
No - RIC bodies use the RIC charger families.
Will it work with Unitron Stride BTEs?
No - use Unitron's own Charger Combi BTE 2 pairing - no cross-brand charger equivalence is published by Sonova.
Can I use it while travelling?
Only with access to mains power - it has no internal battery. Combinable with the Phonak Power Pack (sold separately) when travelling.
Which Phonak hearing aids does it fit?
It fits Phonak Naída L-PR / P-PR, Phonak Sky L-PR / M-PR, Phonak Bolero M-PR and Phonak Roger Focus II only - the rechargeable BTE bodies. Sonova pairs each hearing-aid generation with its own charger family, so a charger from another generation will not seat or charge your aids correctly. Check the model name printed on your hearing aid or its box, or message us and we'll confirm.
How long does a full charge take, and what do the lights mean?
A full charge takes up to 3 hours. Solid green means fully charged and ready for use after removal; blinking means charging is in progress (or the aid switching on just after removal); blinking red means the aid is nearly empty. Solid green on the charger itself confirms it has power, and the aids switch off automatically when seated and on again at removal.
What's in the box?
One Phonak Charger Combi BTE 2 unit, supplied in sealed original Phonak packaging, plus power cabling as supplied in the original Phonak packaging. If you need to confirm the exact in-box contents before buying - for example, whether a mains plug adapter is included with your unit - message us and we'll check the batch on the shelf.
What warranty covers this accessory?
Whatever the manufacturer's position, you are covered twice with us: our 30-day returns policy, and your statutory consumer rights, which run against us as the retailer. Phonak covers electronic accessories like this one with their own one-year international manufacturer warranty, separate from the hearing aid's own cover (stated in Phonak's own user guides) - if you ever need it, message us and we will help route the claim.
Phonak is a trademark of Sonova AG.
EarX is an independent retailer. The products we supply are genuine Phonak, sourced through authorised channels.