Condition: New Other – New Old Stock / Open Box
Genuine Bendix M-32 12V ABS Modulator Valve, supplied in its original Bendix box marked NEW.
This valve appears new, unused, and never installed, with clean air ports, undamaged threads, and an intact threaded 3-pin electrical connector.
The valve shows minor cosmetic storage wear, including light tarnishing on the cast metal housing and some discoloration on the electrical connector pins. No visible corrosion pitting was observed.
Important Part Number Information: The valve identification label appears to read 823171, while the original Bendix box is labeled 801666. These numbers are provided for identification purposes. Their interchangeability has not been independently confirmed.
Brand: Bendix
Model: M-32
Type: ABS Air Brake Modulator Valve
Unit Label Number: Appears to read 823171
Box Part Number: 801666
Voltage: 12V DC
Supply Port: 1 SUP
Delivery Port: 2 DEL
Measured Port Opening: Approximately 0.74–0.75 Inches
Port Thread Size: Not Confirmed
Electrical Connector: Threaded 3-Pin
Cover Marking: Z013356R
Housing Marking: 13256276
Label Code: 300386
Country of Assembly: Mexico
Condition: New Other / NOS
Packaging: Original Bendix Box
Quantity: 1
The Bendix M-32 ABS Modulator Valve is an electronically controlled pneumatic valve designed for compatible commercial vehicle anti-lock braking systems.
This 12V valve features a heavy-duty cast metal housing, integrated solenoid assembly, and threaded 3-pin electrical connection.
The pneumatic ports are clearly marked:
1 SUP: Air Supply
2 DEL: Air Delivery
The unit carries the following identification markings:
Unit Label: Appears to read 823171
Original Box: 801666
Model: M-32
Voltage: 12V
Cover Marking: Z013356R
The valve is supplied in original Bendix packaging marked as a new product.
Genuine Bendix ABS modulator valve
New Old Stock – Appears Never Installed
M-32 valve configuration
12V electrical operation
Threaded 3-pin electrical connector
Heavy-duty cast metal housing
Clearly marked supply and delivery ports
Clean, undamaged air port threads
Factory green paint markings
Original Bendix identification label
Original Bendix NEW packaging
Assembled in Mexico
NEW OTHER / UNUSED OEM SURPLUS
This valve appears never installed or placed into service.
Visual inspection shows:
Clean supply and delivery ports
Clean air port threads
Threaded electrical connector intact
No visible cracks in the housing
No obvious broken mounting features
Manufacturer identification label intact
Factory green paint markings present
No visible installation-related damage
Minor storage conditions include:
Light tarnishing on the cast metal housing
Discoloration on the electrical connector pins
General handling and storage marks
The original Bendix box shows shelf wear, a stain on the top panel, a creased lid, and an additional distributor identification label.
The valve has not been independently function-tested by our facility.
Please review all photographs carefully for the exact condition, connector configuration, and identification markings.
This valve is intended for compatible 12V commercial vehicle ABS air brake systems requiring the appropriate Bendix M-32 modulator configuration.
Potential applications include certain heavy-duty trucks, buses, and commercial vehicles equipped with compatible Bendix ABS systems.
Exact vehicle makes, models, and production years have not been confirmed.
Before purchasing, please verify:
Bendix Unit Label Number: 823171 (verify against photos)
Bendix Box Part Number: 801666
M-32 valve configuration
12V electrical compatibility
Threaded 3-pin connector arrangement
Supply and delivery port locations
Port thread sizes
Mounting configuration
ABS control system compatibility
The unit and box have different identification numbers. Please do not assume they are interchangeable without confirming the correct application.
Compare the actual valve shown in the photographs with your original component and consult the appropriate Bendix parts documentation before ordering.
This is a safety-critical air brake component.
Installation should be performed by a qualified commercial vehicle brake technician following the appropriate Bendix and vehicle manufacturer service procedures.
Before installation, verify the valve configuration, electrical connector, pneumatic connections, and compatibility with the vehicle's ABS system.
After installation, the braking system must be inspected and tested for proper operation, air leaks, ABS diagnostic faults, and correct brake response before the vehicle is returned to service.
1 × Bendix M-32 12V ABS Modulator Valve
1 × Original Bendix Parts Box
No additional wiring harnesses, air fittings, mounting brackets, or installation hardware are included unless shown in the photographs.
Only the valve and packaging pictured are included.
The valve will be securely packaged to protect the electrical connector, air ports, and cast housing during transportation.
The original Bendix box will be included inside protective shipping packaging.
Shipping is calculated based on the buyer's location.
30-day returns accepted. Buyer pays return shipping.
Item must be returned unused, uninstalled, and in the same condition received.
***122A1***
2989-855 860 861 862 863 864 865 866 867 868869870