FLIR ONE Gen 3 thermal camera for iPhone and iPad with Lightning (435-0004-01)
Included: original USB-C charging cable, pouch, box.
Please note:
•Lightning connector: for Lightning iPhones (up to the iPhone 14 series) and Lightning iPads. FLIR says it doesn't work with iPhone 15 and later (USB-C).
•Gen 3 has 80 × 60 thermal resolution; the FLIR ONE Pro (160 × 120) is a different model.
•Lightning connector: for Lightning iPhones (up to the iPhone 14 series) and Lightning iPads. FLIR says it doesn't work with iPhone 15 and later (USB-C).
•Gen 3 has 80 × 60 thermal resolution; the FLIR ONE Pro (160 × 120) is a different model.
Condition: both lenses free of scratches, Lightning plug in good conditions. Battery: charges fully over USB-C. Works perfectly. Some dents and peeling in the casing of the travel pouch.
About this camera:
•Turns your iPhone or iPad into a thermal camera: find heat loss and draughts, damp spots, overheating electrics, hot pipes and underfloor heating runs.
•MSX adds edge detail from its visual camera, so you can see what the thermal image shows.
•Measures from −20 to 120 °C.
•The OneFit connector extends up to 4 mm, so it works through most phone cases.
•Has its own battery, charged over USB-C; uses the free FLIR ONE app.
•Turns your iPhone or iPad into a thermal camera: find heat loss and draughts, damp spots, overheating electrics, hot pipes and underfloor heating runs.
•MSX adds edge detail from its visual camera, so you can see what the thermal image shows.
•Measures from −20 to 120 °C.
•The OneFit connector extends up to 4 mm, so it works through most phone cases.
•Has its own battery, charged over USB-C; uses the free FLIR ONE app.