PRODUCT DESCRIPTION

DSPIAE · Modelling Putty

MEP-02 Epoxy Modelling Putty – White 100g

Two-part putty that shapes like clay and cures hard enough to sand, drill and paint 🗿

⭐ Why modellers use it

✅ Plenty of working time – around 90 minutes to sculpt, smooth and refine before it starts to set.

✅ Very low shrinkage – what you shape is what you get once it has cured, with no sinking back into the gap.

✅ Cures hard and workable – sand it, drill it, carve it and paint it like the plastic around it.

✅ White, so light colours cover it easily – a neutral white base under white, yellow, red and other pale paint.

✅ No special tools – cut, knead by hand and shape with your fingers or whatever sculpting tools you already own.

🔧 What it is

MEP-02 is a two-part epoxy putty made for model making. It comes as two separate bars, Part A and Part B. On their own they stay soft indefinitely. Cut off equal amounts, knead them together until the colour is completely even, and the putty begins a slow chemical cure.

While it is soft it behaves like a firm modelling clay: you can press it into a gap, build up a missing corner, or sculpt new detail from scratch. Once cured it is a solid, stable material that takes a sharp edge and a fine surface.

That makes it the right choice for the jobs that glue-type fillers cannot do – larger gaps, rebuilding lost shapes, and adding detail that was never on the kit. This is the White version: the easiest of the range to hide under light paint schemes, and clearly visible against grey and dark plastic while you work.

📐 Specifications

Brand	DSPIAE
Model	MEP-02
Type	Two-part epoxy modelling putty
Colour	White
Contents	100 g total – Part A 50 g + Part B 50 g
Mix ratio	Equal parts A and B, kneaded to an even colour
Working time	Approx. 90 minutes
Ready to sand	After approx. 6 hours
Best working temperature	20–25°C (curing slows below 10°C)
Once cured	Sandable, drillable, carvable, paintable
Also available	MEP-01 Skin, MEP-03 Grey (sold separately)

📦 What's in the pack

▪️ 1 x Part A, 50 g

▪️ 1 x Part B, 50 g

🎯 Where it works best

👍 Models finished in light colours – a white fill needs far less paint to hide than a dark one.

👍 Larger gaps and seams – anything too wide for a glue-type filler.

👍 Rebuilding shapes – corners and edges lost to cutting, trimming or damage.

👍 Sculpting detail – rivets, hoses, cables, cloth folds, armour trim and custom parts.

👍 Terrain, bases and repairs – rocks, rubble and groundwork, and rebuilding a broken area so it can be sanded and re-scribed.

🧤 How to use it

1. Cut equal amounts from Part A and Part B. Only mix what you can use in the next hour or so.

2. Knead them together until the colour is completely even, with no streaks or marbling.

3. Press the putty firmly onto the model and shape it. You have around 90 minutes.

4. Leave it to cure. It is ready to sand after about 6 hours at room temperature.

5. Sand, carve or drill to the final shape, then prime and paint.

💡 Tips for best results

👉 Damp fingers and tools. A little water on your fingertips and sculpting tools stops the putty sticking to them and lets you smooth the surface.

👉 Do the shaping while it is soft. Smoothing wet putty takes seconds. Sanding cured epoxy takes much longer. Get it as close to final shape as you can before it sets.

👉 Mix thoroughly. Unmixed putty stays soft. Keep kneading well past the point where it first looks even, as streaks are harder to spot in white than in a coloured putty.

👉 Clean hands and a clean surface. White putty picks up dust, graphite and pigment from fingers and cutting mats. It does not affect the cure, but it is worth keeping tidy.

👉 Key the surface. A quick scuff with sandpaper on smooth plastic gives the putty something to grip.

👉 Keep A and B apart in storage. Do not let the two bars touch, cut them with a clean blade, and reseal the pack. Store it somewhere cool and dry.

⚠️ Worth knowing before you buy

▪️ It is not a quick fix. Allow about 6 hours before sanding. If you need a seam filled and sanded in ten minutes, a gap-filling CA glue is the better tool.

▪️ It needs warmth to cure. In a cold shed or garage below about 10°C the cure slows right down. Work and cure at normal room temperature.

▪️ Low contrast on white plastic. On white or very pale parts a white fill is hard to see while you sand and shape. For those, the grey MEP-03 or skin MEP-01 shows your work more clearly.

▪️ It is not a colour match. The cured putty will not match the shade of white kit plastic. It is meant to be primed and painted, not left as a finished surface.

▪️ Not ideal for hairline seams. A putty this firm is hard to work into a very fine seam. It is at its best on gaps you can actually press it into.

▪️ Protect your skin. Uncured epoxy can irritate skin and cause an allergic reaction with repeated contact. Wear disposable gloves when mixing and shaping, wash your hands afterwards, do not eat or drink while working, wear a dust mask when sanding, and keep it out of reach of children.

🚚 Dispatch and delivery

📮 Orders placed before 3 PM on working days are dispatched the same day.

🇬🇧 Sent from our own stock in Derby, UK – no waiting for overseas shipping.

📦 Buying several items? Postage is combined, and if you end up overpaying we refund the difference when we pack your order.

Hobby Heaven

By Hobbyists. For Hobbyists.

A family-run UK hobby and art supplies shop. Not sure which putty colour or filler suits your project? Send us a message – a real modeller will answer.

DSPIAE · Modelling Putty MEP-02 Epoxy Modelling Putty – White 100g Two-part putty that shapes like clay and cures hard enough to sand, drill and paint 🗿 ⭐ Why modellers use it ✅ Plenty of working time – around 90 minutes to sculpt, smooth and refine before it starts to set. ✅ Very low shrinkage – what you shape is what you get once it has cured, with no sinking back into the gap. ✅ Cures hard and workable – sand it, drill it, carve it and paint it like the plastic around it. ✅ White, so light colours cover it easily – a neutral white base under white, yellow, red and other pale paint. ✅ No special tools – cut, knead by hand and shape with your fingers or whatever sculpting tools you already own. 🔧 What it is MEP-02 is a two-part epoxy putty made for model making. It comes as two separate bars, Part A and Part B. On their own they stay soft indefinitely. Cut off equal amounts, knead them together until the colour is completely even, and the putty begins a slow chemical cure. While it is soft it behaves like a firm modelling clay: you can press it into a gap, build up a missing corner, or sculpt new detail from scratch. Once cured it is a solid, stable material that takes a sharp edge and a fine surface. That makes it the right choice for the jobs that glue-type fillers cannot do – larger gaps, rebuilding lost shapes, and adding detail that was never on the kit. This is the White version: the easiest of the range to hide under light paint schemes, and clearly visible against grey and dark plastic while you work. 📐 Specifications Brand DSPIAE Model MEP-02 Type Two-part epoxy modelling putty Colour White Contents 100 g total – Part A 50 g + Part B 50 g Mix ratio Equal parts A and B, kneaded to an even colour Working time Approx. 90 minutes Ready to sand After approx. 6 hours Best working temperature 20–25°C (curing slows below 10°C) Once cured Sandable, drillable, carvable, paintable Also available MEP-01 Skin, MEP-03 Grey (sold separately) 📦 What's in the pack ▪️ 1 x Part A, 50 g ▪️ 1 x Part B, 50 g 🎯 Where it works best 👍 Models finished in light colours – a white fill needs far less paint to hide than a dark one. 👍 Larger gaps and seams – anything too wide for a glue-type filler. 👍 Rebuilding shapes – corners and edges lost to cutting, trimming or damage. 👍 Sculpting detail – rivets, hoses, cables, cloth folds, armour trim and custom parts. 👍 Terrain, bases and repairs – rocks, rubble and groundwork, and rebuilding a broken area so it can be sanded and re-scribed. 🧤 How to use it 1. Cut equal amounts from Part A and Part B. Only mix what you can use in the next hour or so. 2. Knead them together until the colour is completely even, with no streaks or marbling. 3. Press the putty firmly onto the model and shape it. You have around 90 minutes. 4. Leave it to cure. It is ready to sand after about 6 hours at room temperature. 5. Sand, carve or drill to the final shape, then prime and paint. 💡 Tips for best results 👉 Damp fingers and tools. A little water on your fingertips and sculpting tools stops the putty sticking to them and lets you smooth the surface. 👉 Do the shaping while it is soft. Smoothing wet putty takes seconds. Sanding cured epoxy takes much longer. Get it as close to final shape as you can before it sets. 👉 Mix thoroughly. Unmixed putty stays soft. Keep kneading well past the point where it first looks even, as streaks are harder to spot in white than in a coloured putty. 👉 Clean hands and a clean surface. White putty picks up dust, graphite and pigment from fingers and cutting mats. It does not affect the cure, but it is worth keeping tidy. 👉 Key the surface. A quick scuff with sandpaper on smooth plastic gives the putty something to grip. 👉 Keep A and B apart in storage. Do not let the two bars touch, cut them with a clean blade, and reseal the pack. Store it somewhere cool and dry. ⚠️ Worth knowing before you buy ▪️ It is not a quick fix. Allow about 6 hours before sanding. If you need a seam filled and sanded in ten minutes, a gap-filling CA glue is the better tool. ▪️ It needs warmth to cure. In a cold shed or garage below about 10°C the cure slows right down. Work and cure at normal room temperature. ▪️ Low contrast on white plastic. On white or very pale parts a white fill is hard to see while you sand and shape. For those, the grey MEP-03 or skin MEP-01 shows your work more clearly. ▪️ It is not a colour match. The cured putty will not match the shade of white kit plastic. It is meant to be primed and painted, not left as a finished surface. ▪️ Not ideal for hairline seams. A putty this firm is hard to work into a very fine seam. It is at its best on gaps you can actually press it into. ▪️ Protect your skin. Uncured epoxy can irritate skin and cause an allergic reaction with repeated contact. Wear disposable gloves when mixing and shaping, wash your hands afterwards, do not eat or drink while working, wear a dust mask when sanding, and keep it out of reach of children. 🚚 Dispatch and delivery 📮 Orders placed before 3 PM on working days are dispatched the same day. 🇬🇧 Sent from our own stock in Derby, UK – no waiting for overseas shipping. 📦 Buying several items? Postage is combined, and if you end up overpaying we refund the difference when we pack your order. Hobby Heaven By Hobbyists. For Hobbyists. A family-run UK hobby and art supplies shop. Not sure which putty colour or filler suits your project? Send us a message – a real modeller will answer.

Specifications

Brand Dspiae
Type Epoxy Putty
MPN MEP-02
Features Sandable, Drillable, Paintable, Low Shrinkage
Country of Origin China
Weight 100 g
Suitable For Plastic, Resin, Metal, Wood
Colour White
EAN 6977151543417

ABOUT US

Welcome to Hobby Heaven!

We're a brand built by passionate hobbyists for hobbyists. Our mission is to support all your creative endeavors, whether you're into modeling, wargaming, crafting, or art. As enthusiasts ourselves, we understand the importance of quality supplies at affordable prices.

Our carefully curated selection of high-quality materials is designed to inspire and empower hobbyists and artists alike. We're particularly proud of our innovative, cost-effective basing system - a game-changer for modelers and wargamers looking for professional results without breaking the bank.

At Hobby Heaven, we're dedicated to providing exceptional customer service and ensuring your creative projects are a success. Our team is always ready to offer advice, share techniques, or help you find the perfect supplies for your next masterpiece.

Thank you for choosing us as your trusted partner in creativity. We're excited to be part of your hobby journey!

PAYMENT

We accept payment by PayPal and Credit / Debit cards entered on eBay only. You must be registered with PayPal or eBay to buy from us.

SHIPPING

We primarily use RM24 for shipping, and we can arrange other courier services upon request. For large international shipments, we utilize FedEx. Once your order has been dispatched, you will receive tracking information. For domestic deliveries, the estimated arrival time is usually 1-4 days.

RETURNS

Please ensure that all items are returned in their original condition. Returns are processed within 1-2 business days of receipt. Refunds are issued minus the original shipping cost. All returns are handled in accordance with eBay's policies.

At Hobby Heaven, we strive to provide our customers with the best possible online shopping experience. Our commitment to excellent customer service extends well beyond the delivery of your order.

We encourage you to reach out with any questions or concerns regarding your purchase. The most convenient way to contact us is through the eBay messaging system.

Our dedicated customer service team responds to messages within 24 hours, Monday through Friday, between 8:00 AM and 3:00 PM GMT.

Your satisfaction is our top priority. We're here to help and look forward to assisting you!

WHAT OUR CUSTOMERS ARE SAYING ABOUT US

Order delivered on time with no issues	beano4435 (194 )
Order delivered on time with no issues	xmedar (345 )
Order delivered on time with no issues	julma8824 (1 )
Order delivered on time with no issues	smigg-the-mi (92 )
Order delivered on time with no issues	hariali (168 )