Note: Batteries are not included and must be purchased separately.


This is a Compression scale kit, which can be used to measure Compression and tension weight

This hanging scale has been calibrated before delivery, user can use it directly.

Scale kit includes: 1 pc weighing indicator, 4 pc load cell.

Weighing indicator Built-in rechargeable battery, the scale can work everywhere

load cell capacity: 2000kg

Accuracy: 1/3000

Load capacity of whole load cells: 5000kg

Power supply: AU Plug


Applied in platform scale, bench scale, floor scale, truck scale, weighbridge, connect 1-4 pieces 2T load cells

Display: 7-bit LED, 7 state indicator, 3 power indicator symbols

Accuracy: 1/3000

A&D Speed: 10 times per second

Load cell excitation voltage:DC 5V

Input signal range : -16mV ~ 18mV

Power supply:AC220V and built-in Rechargeable Battery DC 6V/2.8Ah

Unit type: kg, lb


One set include:

1.   Weighing instrument - 1pc

2.   Load cell - 4pc

3.   Junction box - 1pc

4.   3meter Cable - 1pc


Instructions:

1 .   load cell - must avoid welding, not blisters, connect the ground wire to prevent lightning strikes

2 .   Sensor wiring mode: black E-, red E+, white S-, green S+, yellow to GND [E: power supply, S signal,] The terminal under the terminal has E, S, GND, it can be connected.   We also connected the line connecting the meter head, or the wiring order of the line.

3 .   Four sensors can be connected to one of the terminals.


Note:

Install with the arrow pointing upwards, and place a gasket between the iron plate and the sensor.

The sensors are installed at four corners. And the directions of the sensors are consistent.

The connection method of the lines inside the junction box:

E+ corresponds to the red line of the sensor

E- corresponds to the black line of the sensor

S+ corresponds to the green line of the sensor

S- corresponds to the white line of the sensor

The last one is a shielded wire, which can be connected or not

L1-L2-L3-L4 are for connecting sensors. Each one will have four wires.