Run by qualified audiologists·30-day returns·Tracked delivery
Charge your Oticon hearing aids at home or away - three full charges off mains. Oticon makes five different SmartChargers in this family, each shaped for a specific hearing aid. This charger is the Intent miniBTE R version - for Oticon Intent miniBTE R hearing aids.
It works as a desktop dock on mains and as a portable power bank away from a socket. There is no pairing or app setup - check the compatibility table, then see How charging works (at home and on the go) below.
Find your hearing aid below to confirm which SmartCharger you need. The highlighted row is this charger.
| SmartCharger | For aid style | Compatible with |
|---|---|---|
miniRITE R | RIC (rechargeable) | Real, More, Zircon, Jet PX, Play PX, CROS PX View charger →Plus Bernafon and Sonic miniRITE R equivalents. Opn S, Opn Play and Ruby do not charge on this charger - they need the Charger 1.0 miniRITE R, which we list separately. |
miniBTE R | BTE (rechargeable) | More, Real, Zircon, Play PX, Sage View charger →Plus Bernafon and Sonic miniBTE R equivalents. |
nxtCIC R | CIC (in-canal) | Zeal nxtCIC R only View charger → |
For Intent miniRITE | RIC (Intent and Reveal) | Intent 1/2/3/4 miniRITE; Reveal 1/2/3/4 miniRITE R View charger → |
For Intent miniBTE R | BTE (Intent only) | Intent 1/2/3/4 miniBTE R You’re here |
SmartCharger is two chargers in one: a desktop dock when plugged into mains, and a portable power bank when carried away from a socket. Both use the same dock - what changes is whether it’s drawing power from the wall or from its built-in battery.
This SmartCharger uses contact charging - newer technology where the hearing aid's metal contacts touch the charger's metal pads directly. Contact charging is faster than the older inductive method but means the aids must be seated precisely (the magnets handle this automatically).
1. Charging at home (plugged in)
Plug the supplied USB cable into the back of the SmartCharger and connect to a mains USB power supply (5 V / 1 A, included). Place your hearing aids in the magnetic charging ports - the magnets pull the aids into the correct position automatically and the aids switch off. The lid closes over the top to keep dust off and the aids safe. From a fully drained battery, expect around 2 hours for a full charge of both aids; a 30-minute quick charge gives roughly 8 hours of use. The aids switch back on automatically when you remove them.
2. Charging on the go (power bank)
Charge the SmartCharger’s internal battery overnight at home - it takes around 4 hours to fill the power bank alone, or up to 8 hours if you charge the SmartCharger and the aids together. Once the power bank is full, you can disconnect the cable and take the SmartCharger anywhere. It will deliver three full charges of a pair of hearing aids before it needs mains power again - typically enough for a long weekend. You can also top it up from a USB port in a car, laptop, or USB-A power bank, as long as the source is USB 2.0+ and supplies at least 500 mA.
3. Protection on the go
Oticon designs the SmartCharger to protect the hearing aids during transport - dock them, close the lid, and carry them in it.
LED status: a small LED on the back of the SmartCharger shows the charging state. Orange = charging, green = fully charged, orange flashing = power bank too low to charge the aids (plug into mains).
The SmartCharger is plug-and-play - there’s no pairing or app setup needed. The hearing aids are recognised by the magnetic charging contacts as soon as you place them.
Before first use - charge the power bank fully
Daily charging routine
Travel use
With a fully charged power bank, you can take the SmartCharger anywhere. Three full hearing-aid charging cycles are typically enough for a long weekend. To recharge the SmartCharger itself when away, plug into any USB 2.0+ source (5 V, 500 mA minimum) - car USB, laptop, or USB-A power bank all work. Use the original supply for fastest mains charging.
Care: wipe the charger and aids dry before docking. Never wash the SmartCharger or immerse it in water. Keep the charging contacts clean of dust with a dry cloth - no liquids. Store somewhere dry and not too cold.
Note: hearing aids are not included - this is a charger only. Sold as a replacement or backup charger for users who already own compatible Oticon Intent miniBTE R hearing aids.
Is this genuine Oticon?
Yes. This is the official Oticon SmartCharger sourced through authorised channels - not a third-party copy or refurbished unit.
How do I know if I have an Intent miniBTE R hearing aid?
"Intent miniBTE R" is a newer Oticon hearing aid (launched 2024). The model name is usually on the original box or in your audiologist’s paperwork. If your aid was supplied before 2024, you most likely don’t have an Intent - you may have a miniRITE R or miniBTE R model instead.
Why can’t I use a different SmartCharger from the family?
Intent uses contact charging on a different physical interface. The aids will not seat correctly on older miniRITE R / miniBTE R chargers, and older aids will not charge correctly on this Intent dock - they look similar but are not interchangeable. See the comparison table above for which SmartCharger fits which aid.
How long does the power bank last away from mains?
A fully charged SmartCharger can deliver three full charging cycles for a pair of hearing aids before it needs mains power again. In practice that’s around 2-3 days of normal use without a socket. Charging the SmartCharger itself from empty takes around 4 hours.
Can I charge from a USB port in my car or laptop?
Yes. The SmartCharger accepts power from any USB 2.0+ source supplying at least 500 mA at 5 V - so car USB sockets, laptop USB ports, and USB-A power banks all work. For fastest mains charging, use the supplied 5 V / 1 A power supply.
How long until my aids are charged?
Around 2 hours for a full charge from empty. A 30-minute quick top-up gives roughly 8 hours of use (depending on streaming and settings). The aids switch off when seated and switch on when removed - no buttons to press.
What does the case do besides charging?
Oticon designs the SmartCharger to protect the hearing aids during transport: dock them, close the lid and carry them in it. If your aids often get damp from rain or sweat, a dedicated hearing aid dryer is made for that.
What if my SmartCharger LED is flashing orange?
That means the power bank is too low to charge the aids - plug the SmartCharger into mains for around 4 hours to refill it. The LED should change to steady orange (charging) and then green (full).
Will it fit any non-Oticon brand?
No. This SmartCharger is designed exclusively for Oticon’s Intent miniBTE R hearing aids. Other manufacturers (Phonak, Widex, Signia, ReSound, Starkey) use different charging systems entirely.
What information do you need from me before purchase?
Just your hearing aid model name (for example, "Oticon Intent 2 miniRITE" or "Oticon Real 1 miniRITE R"). We’ll confirm SmartCharger compatibility before you buy. If you’re unsure, send a photo of the aid or the original box and we’ll work it out.
What warranty covers this accessory?
Whatever the manufacturer's position, you are covered twice with us: our 30-day returns policy, and your statutory consumer rights, which run against us as the retailer. Oticon chargers carry their own manufacturer warranty, separate from the hearing aid's own cover - the term is stated on the warranty certificate supplied with the charger; if you ever need it, message us and we will help route the claim.
Oticon and SmartCharger are trademarks of Demant A/S.
EarX is an independent retailer. The products we supply are genuine Oticon, sourced through authorised channels.