Rendered or painted images are for reference only. Your model will be supplied as high-quality UNPAINTED & UNPRIMED resin.

Assembly and normal hobby preparation may be required before priming and painting.

This listing is for a physical 3D printed resin collector model only. No digital STL files are included.

• Character: Tyler Durden
• Designer / Studio: WICKED
• Scale: 1:6
• Type: Diorama
• Production: High Resolution 16K Resin 3D Printing
• Material: Photopolymer Resin
• Finish: Unpainted / Unprimed
• Configuration: Diorama configuration
• Country of Production: United Kingdom
• Digital Files Included: No

High-detail The Fight Club Diorama designed by WICKED and professionally produced by Prime Forge using high-resolution 16K resin 3D printing.

A detailed Fight Club display diorama designed around the film's characters and atmosphere, with multiple sculpted elements creating a presentation-focused collector piece.

The model is designed as a premium physical collector piece with a strong focus on sculpted character detail, presentation and paintability.

For painters, the model provides opportunities to work with skin, clothing, armour, hair, weapons, accessories and other sculpted surfaces depending on the design.

High-resolution 16K resin printing helps preserve fine facial, costume, weapon and environmental details across the finished model.

This listing is advertised at 1:6 scale.

• 1:6 Scale: Standard 180cm human reference = approx. 30cm
• 1:8 Scale: Standard 180cm human reference = approx. 22.5cm
• 1:10 Scale: Standard 180cm human reference = approx. 18cm
• 1:12 Scale: Standard 180cm human reference = approx. 15cm

These measurements are scale references using a standard 180cm human character. Actual finished dimensions vary with character proportions, pose, hair, weapons, accessories and display-base or diorama elements.

Custom sizing may be available on request where technically practical.

Prime Forge collector models are produced using high-resolution 16K resin 3D printing to capture fine sculpted details.

The model is supplied in a configuration appropriate to its original geometry. Separate components may include the portrait, body sections, arms, hands, weapons, accessories, environmental elements and display-base components.

Assembly may be required. Test fit all components before gluing and use cyanoacrylate / super glue suitable for resin models.

The model should be primed with a suitable miniature or model primer before painting.

Every model is professionally cleaned, prepared and fully UV cured before dispatch.

Approximately 95% of printing supports are removed during production; however, some micro-support contact points, small support remnants or minor surface marks may remain.

Buyers should expect normal hobby preparation including light cleanup, minor sanding and test fitting before assembly, priming and painting.

Any remaining supports on cured resin should be carefully removed using flush cutters or a sharp hobby knife. Remaining marks can be gently smoothed with fine-grit sandpaper or sanding sticks, approximately 400–800 grit.

You will receive 1× physical The Fight Club Diorama at 1:6 scale.

The model and associated components are supplied unpainted and unprimed, unassembled where applicable.

Painted examples and digital renders are shown to demonstrate the intended appearance of the finished model.

No digital STL files are included.

Every Prime Forge collector model is made to order in the United Kingdom.

Models are professionally cleaned, prepared and fully UV cured before packaging.

Please refer to the dispatch estimate shown on the eBay listing for current production times.

Fight Club WICKED 3D Printed 16K Resin Diorama Unpainted 1:6 Scale

Unpainted and unprimed. No digital STL files are included.