PRE- WIRED 12V 230V T4, T5, T5.1, T6 Electrical Hook Up Kit For Self Build ConversionsTake the stress out of your campervan electrics with this pre-wired, clearly labelled and workshop-tested electrical kit. Designed for self-build campervan conversions, it provides the essential components for both 230V mains hook-up and 12V systems.
Every cable is labelled to show where it connects and how it should be installed, making the system straightforward to route through your van. Quick-connect plugs allow the sockets and hook-up inlet to be unplugged while the cables are installed, then simply connected again afterwards.
230V/240V Mains Equipment

1 x Consumer unit/fuse board with a 30mA RCD, 16A MCB and 6A MCB suitable for an optional mains lighting circuit. 
1 x Chassis bonding cable, approximately 1 metre of 2.5mm² cable, supplied with a pre-crimped lug plus an M6 bolt and nut.
1 x Recessed 16A electric hook-up inlet with waterproof cap, approximately 1.5 metres of cable and a quick-connect plug.
1 x Double mains socket, approximately 3 metres of cable and a quick-connect plug.1 x 16A Hook up cable, 10 metres of cable 

Recessed 16A electric hook-up inlet available in black too, just send us a message!
12V Equipment

1 x Campervan control panel with five 12V switches, a voltmeter, USB charging ports and a 12V auxiliary socket.4 x Spotlights (Warm)1 x 12V Battery Charger 
1 x Lighting cable, approximately 3 metres long, pre-connected and clearly labelled for your lights.
1 x Water-pump cable, approximately 3 metres long, with labelled connection points.
1 x Fridge cable, approximately 3 metres long, with labelled connection points.1 x USB Cable , approximately 3 metres long, with labelled connection points.1 x Battery connection points 
1 x Leisure-battery earth/chassis cable.
1 x Selection of cable crimps, chosen to suit your build. 
20 x Cable-tie bases with cable ties. 1 x Bundle of cable ties 
1 x Roll of electrical insulation tape. 

Why Choose This Kit?

Suitable for first-time and experienced campervan builders.Helpful after-sales guidance available for questions about the supplied system.easy to follow Electric wiring diagram issued with each purchase Pre-wired and workshop tested to reduce complicated preparation.
Clearly labelled connections help make cable routing and installation easier.
Quick-connect mains plugs allow components to be disconnected while cables are routed.

Support After Your Purchase
We understand that many self-builders are not electricians. That is exactly why this kit is designed to make the installation process clearer and more manageable.
After purchase, you will have access to practical product support relating to the kit, including helpful photographs and videos where appropriate. This support does not replace professional electrical installation, inspection or certification.