⚡ Important Notes
• Please check your car manual or original bulb to confirm the bulb size and length before purchasing to save your time.
•If you're not sure about it, please send us an ebay message and tell us your car year, make, model and the position you need to replace, we will help you check with it.
Headlight Specifications:
• Bulb Type: 9005(HB3) High Beam + 9006(HB4) Low Beam
• LED Quantity (Each bulb): 4pcs * COB chips
• Luminous Flux: 16000m / set (8000lm / bulb)
• Operating Voltage: DC 9-32V (suitable for 12V, 24V vehicles)
• Color Temperature: 6000K (Pure White)
• Material: 6063 aviation aluminum profile
• Operating temperature: -40-80 degrees Celsius
• Please check your car manual or original bulb to confirm the bulb size and length before purchasing to save your time.
•If you're not sure about it, please send us an ebay message and tell us your car year, make, model and the position you need to replace, we will help you check with it.
Headlight Specifications:
• Bulb Type: 9005(HB3) High Beam + 9006(HB4) Low Beam
• LED Quantity (Each bulb): 4pcs * COB chips
• Luminous Flux: 16000m / set (8000lm / bulb)
• Operating Voltage: DC 9-32V (suitable for 12V, 24V vehicles)
• Color Temperature: 6000K (Pure White)
• Material: 6063 aviation aluminum profile
• Operating temperature: -40-80 degrees Celsius
Advantages:
-- FOUR SIDES SHINE, NO BLIND ZONE
Latest COB (US) chip light source, 4 luminous faces (270/360 degree) without blind zone
-- DUAL VENTILATE COOLING
Stronger heat sink effect, Longer life
High density cooling fins & a largearea of air holes at the bottom,increase 40% cooling efficiency
High speed mute fan(1200OR/Min).high Air flow for faster cooling rate
Aviation grade aluminum withhigh thermal conductivity
📦 Package Includes:
• 2 x 9005 LED Headlight Bulbs High Beam
• 2 x 9006 LED Headlight Bulbs Low Beam
( Random shipment of new and old packaging !!!)
Install Caution：
1.As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2.Put the vehicle into park or make sure it is securely in gear.
3.Be sure to turn off the ignition and remove the key.
4.Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5.Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6.Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7.Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.