18x8 Satin Black Holden Interceptor Steel Wheel

Product Description

High quality OEM-style GMH Interceptor steel wheel manufactured to meet international standards. Designed for classic Australian GM applications requiring correct fitment, strength, and a period-correct appearance.

Please ensure offsets, clearances and vehicle requirements are confirmed prior to purchase. If unsure of fitment, contact us via eBay Messages before purchasing.

Vehicle Fitment Guide – 5 x 120

Holden

• Holden Commodore VC (1980 - 1981)
• Holden Commodore VH (1981 - 1984)
• Holden Commodore VK (1984 - 1986)
• Holden Commodore VL (1986 - 1988)
• Holden Commodore VN (1988 - 1991)
• Holden Commodore VP (1991 - 1993)
• Holden Commodore VR (1993 - 1995)
• Holden Commodore VS (1995 - 1997)
• Holden Commodore VT (1997 - 2000)
• Holden Commodore VX (2000 - 2002)
• Holden Commodore VY (2002 - 2004)
• Holden Commodore VZ (2004 - 2006)
• Holden Commodore VE (2006 - 2013)
• Holden Commodore VF (2013 - 2017)

Chevrolet

• Chevrolet Camaro – 5th Generation (2010 - 2015)
• Chevrolet Camaro – 6th Generation (2016 - 2023)

Note: Camaro models commonly use staggered wheel widths and offsets. 

BMW – 5x120 Models

• BMW 1 Series E81 / E82 / E87 / E88 (2004 - 2013)
• BMW 1 Series F20 / F21 (2011 - 2019)
• BMW 2 Series F22 / F23 (2014 - 2021)
• BMW 3 Series E36 (1991 - 2000)
• BMW 3 Series E46 (1998 - 2006)
• BMW 3 Series E90 / E91 / E92 / E93 (2005 - 2013)
• BMW 3 Series F30 / F31 / F34 (2012 - 2019)
• BMW 4 Series F32 / F33 / F36 (2013 - 2020)
• BMW 5 Series E60 / E61 (2003 - 2010)
• BMW 5 Series F10 / F11 (2010 - 2017)
• BMW X1 E84 (2009 - 2015)
• BMW X3 – Applicable 5x120 Models
• BMW X4 – Applicable 5x120 Models
• BMW X5 – Applicable 5x120 Models

Note: BMW fitment varies considerably between models, including centre bore, tyre clearance and factory staggered setups. Vehicle-specific fitment should be confirmed before ordering.

Important Fitment Notes

• Vehicle must have 5×120 PCD hubs or conversions.
• Wheel width 18x8 is typically suited to front and rear fitment on most vehicles.
• Guard rolling, suspension mods, or brake clearance checks may be required.
• Fitment is based on factory vehicles only unless otherwise stated.
• Always confirm offset, backspace, and clearance before purchasing.
  
  

• PLEASE READ BEFORE PURCHASE

  Wheels are not a one-size-fits-all product. Even if a wheel matches your vehicle's stud pattern, there are multiple other critical factors that determine whether the wheel and tyre combination will fit safely and correctly.

  It is the buyer’s responsibility to confirm fitment before purchasing.

  Key Fitment Factors to Check:

  • Wheel Width (Front & Rear): Ensure the width is suitable for your vehicle. Front fitment is often more restrictive than rear.
  • Tyre Size: Incorrect tyre sizing can cause scrubbing on guards, suspension, or inner chassis. Always match tyre size appropriately to wheel width.
  • Tyre Bulge: Wider tyres on narrower wheels can create sidewall bulge, increasing the chance of rubbing.
  • Offset (ET) & Backspacing: Critical for correct positioning inside the wheel well. Incorrect offset can cause contact with guards, suspension, or chassis components.
  • Actual Wheel Width: Overall wheel width is typically ~1" wider than the stamped size. Always measure backspace and front space from the vehicle for accuracy.
  • PCD (Stud Pattern): Must match your vehicle exactly.
  • Centre Bore: Must match or be compatible with your hub. Hub-centric fitment is recommended.
  • Brake Clearance: Check clearance for upgraded brakes including Wilwood, Brembo, or other custom brake setups.
  • Suspension Setup: Lowered vehicles or modified suspension may reduce clearance.
  • Guard Clearance: Rolled or unrolled guards will affect fitment.
  • Diff & Rear End Modifications: Shortened or modified differentials will change fitment requirements.
  • Tubbed vs Non-Tubbed: Tubbed vehicles allow for wider wheel fitment than standard wheel wells.
  • Exhaust Clearance: Some exhaust systems run close to the inner wheel and may cause interference.
  • Steering Lock Clearance: Front wheels must clear at full lock without rubbing.

  Important Notes:

  • Fitment may vary even between vehicles of the same make and model.
  • Aftermarket modifications significantly impact wheel fitment.
  • We strongly recommend test fitting or consulting a professional before purchase.

  BCI Wheels is not responsible for incorrect fitment due to lack of measurement or failure to consider the above factors.

  If you are unsure, please contact us prior to purchasing with your full vehicle specifications and modifications so we can assist you.

Payment

Payment is accepted via eBay approved methods. Orders will be dispatched once payment has cleared.

Delivery & Returns

Default shipping applies to Melbourne, Sydney & Adelaide metro areas only. All other locations must contact us for a freight quote prior to purchase.

Returns are accepted for items that are faulty, damaged or not as described, in line with Australian Consumer Law. No returns for change of mind or once tyres have been fitted.

Contact Us

Please contact us via eBay Messages for any fitment, delivery or product enquiries.

BCI Wheels

Classic • Muscle • 4WD Steel Wheels

bciwheels.com.au