THIS LISTING WILL INCLUDE:
1)COMP CAMS 112-335-11 STAGE 1 SUPERCHARGER HRT CAMSHAFT
16)AUTHENTIC MOPAR 'HELLCAT' LIFTERS
1)PREMIUM UPPER HEAD GASKET SET W/ MLS HEAD GASKETS
2)SETS OF FEL-PRO HEAD BOLTS
ABOUT THIS KIT:
COMPLETE COMP CAMS 112-335-11 HRT BLOWER STAGE 1 NON-VVT HEMI CAM KIT – COMP Cams 112-335-11 HRT Series Stage 1 Supercharger Hydraulic Roller Camshaft (221/233 Duration at .050", .594"/.594" Symmetric Valve Lift, 116 LSA, 1,800–6,600 RPM, Premium Billet Steel Core Made in USA, Non-VVT Applications), 16 Authentic Mopar Hellcat Hydraulic Roller Lifters, 2 Sets of Fel-Pro USA Made Head Bolts, and a Full Upper MLS Head Gasket Set. Most complete COMP Cams 112-335-11 Blower Stage 1 cam install kit for 2003–2008 Non-VVT 5.7L and 2005–2010 6.1L HEMI builds — one order one shipment zero guesswork.
STAGE 1 SUPERCHARGER – PERFECT CHOICE FOR POSITIVE DISPLACEMENT AND CENTRIFUGAL BLOWER BUILDS – 221/233 Duration at .050", .594"/.594" Symmetric Valve Lift, 116 LSA, 1,800–6,600 RPM Operating Range. The COMP Cams 112-335-11 is the perfect Stage 1 supercharger grind for 2003–2008 Non-VVT 5.7L and 2005–2010 6.1L HEMI builds running positive displacement or centrifugal supercharger systems — delivering excellent throttle response and great power across a broad 1,800 to 6,600 RPM operating range. The wide 116 degree LSA traps maximum boost pressure inside the combustion chamber preventing it from bleeding off through the exhaust valves — the correct engineering solution for a street-driven blower Non-VVT HEMI. Made in the USA.
16 AUTHENTIC MOPAR HELLCAT HYDRAULIC ROLLER LIFTERS – Not generic offshore substitutes — these are genuine Mopar Hellcat hydraulic roller lifters the same lifters found in the legendary 707 horsepower SRT Hellcat engine. The Hellcat lifter is widely regarded as the most durable and most reliable non-MDS hydraulic roller lifter available for the Gen III HEMI platform — featuring superior oil control valvetrain stability and high-RPM reliability that generic aftermarket lifters simply cannot match. When you are building a serious supercharged Non-VVT 5.7L or 6.1L HEMI build this is the lifter that professional engine builders trust to survive sustained operation under blower boost loads.
FEL-PRO USA MADE HEAD BOLTS + FULL UPPER MLS HEAD GASKET SET – Two complete sets of Fel-Pro torque-to-yield head bolts proudly manufactured in the United States from high-tensile steel — engineered to meet factory clamping load specifications for the Non-VVT 5.7L and 6.1L HEMI platform. Full upper MLS head gasket set featuring Multi-Layer Steel technology — multiple layers of embossed steel with elastomeric coatings delivering superior crush resistance and long-term sealing reliability that composite gaskets simply cannot match under the high cylinder pressures of a supercharged Non-VVT HEMI platform. Any time the heads come off on a Non-VVT HEMI engine do the gaskets and bolts right the first time.
MASSIVE LINEAR BLOWER SQUEEZE – SMOOTH POWER BRAKES – DAILY DRIVER FRIENDLY – This profile is built to keep the intake valves closed long enough to trap incoming supercharger pressure — acceleration feels like a massive linear squeeze that pins you hard into your seat from the second boost arrives. The wide 116 degree LSA maintains stable manifold vacuum ensuring factory power brakes operate predictably and the engine does not stall or stumble against the brakes at red lights. Smooth confident authoritative performance rumble at idle that pairs beautifully with supercharger whine — civil and manageable around town with excellent off-idle throttle response. Works beautifully with factory torque converters — no high-stall setup required.
LST + MSE TECHNOLOGY – WIDE 116 LSA LOCKS IN BOOST – USA MADE CAM – The wide 116 degree LSA is specifically engineered to trap maximum supercharger boost pressure inside the combustion chamber without bleeding it off through the exhaust valves — the exact profile needed for a street driven positive displacement or centrifugal blower Non-VVT HEMI application. Low Shock Technology lobe profiles smooth out valvetrain acceleration spikes keeping valve springs stable across the entire 1,800 to 6,600 RPM operating range. Micro Surface Enhancement finishing improves the load-bearing area by 250%. COMP Cams 112-335-11 camshaft proudly made in the United States. Upgraded valve springs and custom tuning are required for all applications.
VERIFIED FITMENT – Compatible with 2003–2008 Dodge and Chrysler Non-VVT 5.7L HEMI and 2005–2010 6.1L HEMI V8 engines WITHOUT Variable Valve Timing running positive displacement or centrifugal supercharger systems. Fits Dodge Challenger Dodge Charger Dodge Magnum Dodge Durango Ram 1500 Ram 2500 Chrysler 300C Chrysler Aspen Jeep Grand Cherokee and Jeep Commander equipped with the Non-VVT 5.7L or 6.1L Gen III HEMI engine. This cam is NOT for VVT-equipped engines — use the 201-335-17 for 2009+ VVT applications. Upgraded valve springs and custom tuning are required for all applications.