Xerox VersaLink C500 & C505 Paper Tray Feed Roller Kit — Parts Only

New Parts — Parts Only, No Support Xerox VersaLink C500 & C505 Paper Tray Feed Roller Kit — Parts Only Printer not taking paper? Tray not feeding? Parts-only feed roller kit for the main paper tray on the Xerox VersaLink C500 and C505 colour range. Complete feed roller set — replaces every roller that wears in the tray feed assembly Manufactured to match the original for feed torque, surface grip and media handling New parts throughout — no refurbished components Easy DIY fit, no special tools required Parts only — no fitting support included with this kit UK supplier — despatched from our warehouse Need fitting help? Contact us and our team can talk you through it Faults This Kit Helps Resolve Paper not picking up from the trayThe printer sounds like it is trying to pick up paper but nothing enters the feed path. Worn pickup rollers that have lost their grip on the stack are the usual cause. Multiple sheets feeding at onceTwo or more pages feed together, causing a jam or double-printed pages. The separation roller is what holds the second sheet back — once it glazes over, it stops doing that. Misfeed errors at the pickup pointRepeated feed errors reported against the main tray, with paper stopping at or just after pickup, point to worn rollers rather than an obstruction further down the paper path. Paper slipping, skewing, or stopping earlyPaper enters at an angle, stops midway, or slips before reaching the registration rollers. New rollers restore the feed torque and alignment needed for consistent pickup. Paper jams can also be caused by sensors, paper path assemblies, duplex units and fuser assemblies. This kit addresses worn tray feed rollers only. What's in This Kit All components listed below are included as new parts, supplied as a complete feed roller kit. Qty Component Tray / Location 2 Pickup roller Paper tray feed assembly 1 Separation roller Paper tray feed assembly Compatible Printers These models share the same tray feed assembly. If your model isn't listed or has a managed or regional variant code, contact us before ordering and we will confirm compatibility. Range Models Notes VersaLink C500 C500DN, C500N Full kit fits VersaLink C505 C505S, C505X Full kit fits What's Included Complete feed roller kit — all components listed in the kit table above All parts are new — no refurbished components supplied Parts only — this kit does not include fitting support or a refund guarantee Fitting instructions included Install Notes Power off and unplug the printer. Pull the paper tray right out and locate the feed roller area above the opening. Release the old pickup rollers from the shaft and slide them off. Fit the new pickup rollers, then replace the separation roller in the tray. Check every roller is fully seated and the correct way round. Refit the tray and run 10–20 test prints to confirm smooth, consistent pickup. Warranty 90-day Printer Genie warranty — covers manufacturing defects under normal use. Excludes incorrect installation, physical damage, electrical damage, misuse, abnormal wear, and faults elsewhere in the printer. Full terms in our Terms & Conditions. Frequently Asked Questions Will this kit fit my exact model? Check the compatible printers table above. If your model code isn't listed, or your printer is a managed or regional variant, contact us before ordering and we'll confirm. Why are there two pickup rollers and only one separation roller? That's how the tray feed assembly is built on this range — a pair of pickup rollers lift the sheet and a single separation roller holds the next one back. Replacing all three together is what restores reliable single-sheet feeding. Can I fit this kit myself? Yes — this kit is designed for confident DIY fitters or engineers. The rollers are reachable through the tray opening without stripping the printer down. Fitting instructions are included. Is fitting support included? Not with this kit — it is parts only, aimed at engineers and confident fitters. If you would like fitting support and a full refund guarantee included, contact us and we'll let you know what's available for your model.

Xerox VersaLink C500 & C505 Paper Tray Feed Roller Kit — Parts Only

New Parts — Parts Only, No Support

Xerox VersaLink C500 & C505 Paper Tray Feed Roller Kit — Parts Only

Printer not taking paper? Tray not feeding?

Parts-only feed roller kit for the main paper tray on the Xerox VersaLink C500 and C505 colour range.

Complete feed roller set — replaces every roller that wears in the tray feed assembly
Manufactured to match the original for feed torque, surface grip and media handling
New parts throughout — no refurbished components
Easy DIY fit, no special tools required
Parts only — no fitting support included with this kit
UK supplier — despatched from our warehouse
Need fitting help? Contact us and our team can talk you through it

Faults This Kit Helps Resolve

Paper not picking up from the trayThe printer sounds like it is trying to pick up paper but nothing enters the feed path. Worn pickup rollers that have lost their grip on the stack are the usual cause.	Multiple sheets feeding at onceTwo or more pages feed together, causing a jam or double-printed pages. The separation roller is what holds the second sheet back — once it glazes over, it stops doing that.
Misfeed errors at the pickup pointRepeated feed errors reported against the main tray, with paper stopping at or just after pickup, point to worn rollers rather than an obstruction further down the paper path.	Paper slipping, skewing, or stopping earlyPaper enters at an angle, stops midway, or slips before reaching the registration rollers. New rollers restore the feed torque and alignment needed for consistent pickup.

Paper jams can also be causéd by sensors, paper path assemblies, duplex units and fuser assemblies. This kit addresses worn tray feed rollers only.

What's in This Kit

All components listed below are included as new parts, supplied as a complete feed roller kit.

Qty	Component	Tray / Location
2	Pickup roller	Paper tray feed assembly
1	Separation roller	Paper tray feed assembly

Compatible Printers

These models share the same tray feed assembly. If your model isn't listed or has a managed or regional variant code, contact us before ordering and we will confirm compatibility.

Range	Models	Notes
VersaLink C500	C500DN, C500N	Full kit fits
VersaLink C505	C505S, C505X	Full kit fits

What's Included

Complete feed roller kit — all components listed in the kit table above
All parts are new — no refurbished components supplied
Parts only — this kit does not include fitting support or a refund guarantee
Fitting instructions included

Install Notes

Power off and unplug the printer.
Pull the paper tray right out and locate the feed roller area above the opening.
Release the old pickup rollers from the shaft and slide them off.
Fit the new pickup rollers, then replace the separation roller in the tray.
Check every roller is fully seated and the correct way round.
Refit the tray and run 10–20 test prints to confirm smooth, consistent pickup.

Warranty

90-day Printer Genie warranty — covers manufacturing defects under normal use. Excludes incorrect installation, physical damage, electrical damage, misuse, abnormal wear, and faults elsewhere in the printer. Full terms in our Terms & Conditions.

Frequently Asked Questions

Will this kit fit my exact model?

Check the compatible printers table above. If your model code isn't listed, or your printer is a managed or regional variant, contact us before ordering and we'll confirm.

Why are there two pickup rollers and only one separation roller?

That's how the tray feed assembly is built on this range — a pair of pickup rollers lift the sheet and a single separation roller holds the next one back. Replacing all three together is what restores reliable single-sheet feeding.

Can I fit this kit myself?

Yes — this kit is designed for confident DIY fitters or engineers. The rollers are reachable through the tray opening without stripping the printer down. Fitting instructions are included.

Is fitting support included?

Not with this kit — it is parts only, aimed at engineers and confident fitters. If you would like fitting support and a full refund guarantee included, contact us and we'll let you know what's available for your model.