Enginetech
ES186R Stage 3 Camshaft + High Performance Lifters + Double Roller Timing + Z28 Style Springs + Steel Retainers & Locks
.480/.480 232/232 108 LSA – Chevy SBC 283 302 327 350 400
Aggressive. Lopey. Powerful. Iconic.
THIS LISTING WILL INCLUDE:
1) ENGINETECH ES186R STAGE-3 CAMSHAFT
16) REDLINE HIGH-PERFORMANCE HYDRAULIC LIFTERS
1) TRUE DOUBLE ROLLER TIMING SET
16) Z28 STYLE HIGH PERFORMANCE SPRINGS
16) STEEL RETAINERS & LOCKS
- COMPLETE ENGINETECH ES186R STAGE 3 SBC CAM KIT
– Enginetech ES186R Stage 3 High-Performance Hydraulic Flat Tappet
Camshaft (232/232 Duration at .050", .480"/.480" Valve Lift, 108 LSA,
2,200–6,200 RPM Operating Range), Full Set of Premium Redline
Performance Lifters, TS163X True Double Roller Timing Set, and Z28-Style
High Performance Valve Springs with Steel Retainers and Locks. Most
complete ES186R SBC cam kit for hot rod street and strip applications —
one order one shipment zero guesswork.
- STAGE 3 HOT ROD – HEAVY LOPE – FREIGHT TRAIN HIGH RPM SURGE –
232/232 Duration at .050", .480"/.480" Valve Lift, 108 LSA, 2,200–6,200
RPM Operating Range. The Enginetech ES186R delivers a hard-hitting
choppy and mean idle that rattles exhaust pipes and shakes fenders at
stoplights — leaving no doubt this Small Block Chevy is a modified
high-performance machine. Past 2,500 RPM the engine suddenly wakes up
and pulls like a freight train all the way to 6,000+ RPM. The ultimate
budget street strip hot rod cam for any 283 302 305 327 350 or 400 cubic
inch SBC build.
- Z28-STYLE HIGH PERFORMANCE VALVE SPRINGS +
STEEL RETAINERS + LOCKS – Purpose-matched to the ES186R's .480"/.480"
lift profile for correct spring pressure and reliable high-RPM operation
throughout the entire 2,200–6,200 RPM power band — required to prevent
severe valve float and engine damage past 5,000 RPM. Spring specs:
2.023" free height with damper, 1.260" OD, 118 lbs closed at 1.700", 318
lbs open at 1.210", coil bind at 1.160". Steel retainers and locks
included for a complete professional spring installation — no additional
parts needed.
- PREMIUM REDLINE PERFORMANCE LIFTERS –
Premium Redline high performance lifters purpose-matched to the
Enginetech ES186R Stage 3 cam profile for smooth reliable operation and
excellent valve control across the entire 2,200 to 6,200 RPM operating
range. The right lifters for the right cam — everything needed for a
complete professional ES186R SBC cam swap in one box with nothing left
to source separately.
- TS163X TRUE DOUBLE ROLLER TIMING SET – The
TS163X True Double Roller Timing Set delivers rock-solid cam timing
accuracy and long-term durability that stock single roller timing chains
simply cannot match on any performance SBC build. Precise cam timing is
absolutely critical to maximizing the high-RPM power that the ES186R
was engineered to deliver — and the TS163X ensures that timing stays
locked in mile after mile at 6,000+ RPM. This is the hardware that
separates a proper ES186R SBC cam swap from a basic parts swap.
- THE ULTIMATE BUDGET HOT ROD SBC CAM –
The ES186R is the cam serious SBC builders reach for when they want
maximum street-legal muscle without paying boutique prices. Fire it up
and the violent choppy race-car idle announces immediately this Small
Block means business — then past 2,500 RPM the engine transforms pulling
like a freight train all the way to 6,200 RPM. Same legendary Elgin
E-902-P specifications that built a massive following among SBC builders
for decades — now at a fraction of the cost. Big power. Broad
powerband. Built for the street.
- MAXIMUM STREET LEGAL MUSCLE – HIGH RPM SCREAMING RUSH –
The ES186R trades away low-end towing grunt to give you an intense
high-RPM screaming rush of power — the real action starts above 2,500
RPM where the engine wakes up and pulls relentlessly all the way to
6,200 RPM. Below 2,000 RPM the engine feels softer than stock — this cam
is purpose-built for drivers who want maximum top-end performance not
low-end towing grunt. Strictly for mechanical carburetors or tunable
aftermarket EFI applications.
- VERIFIED FITMENT –
Compatible with all General Motors Small Block Chevy V8 engines from
283 to 400 cubic inches built from 1958 to 1998 including 283, 302, 305,
327, 350, and 400 cubic inch applications. Fits C10, C20, C30, K10, K20
trucks and all Camaro, Corvette, Chevelle, Nova, El Camino, Impala, and
Monte Carlo models equipped with SBC V8 engines. Strictly for
carbureted or tunable aftermarket EFI applications. Please verify lifter
type and valvetrain compatibility prior to installation.