Rendered or painted images are for reference only. Your model will be supplied as a high-quality UNPAINTED & UNPRIMED resin print.

Assembly and normal hobby preparation may be required before priming and painting.

This listing is for a physical 3D printed resin collector model only. No digital STL files are included.

• 1× ARF Trooper & 501st Legion AT-RT Collector Sculpture

Designed by SW3D / StarWars3DModels and professionally produced by Prime Forge using high-resolution 16K resin 3D printing.

The complete sculpture combines the ARF Trooper, AT-RT reconnaissance walker and display-base elements into a substantial collector display.

The model and associated components are supplied according to the original sculpture configuration.

• Character: ARF Trooper
• Unit: 501st Legion
• Vehicle: AT-RT Walker
• Series: The Clone Wars
• Designer / Studio: SW3D / StarWars3DModels
• Quantity: 1 Complete Sculpture
• Original Scale: 1:8
• Approx. Overall Size: 47.5cm
• Type: Character & Vehicle Collector Sculpture
• Production: High Resolution 16K Resin 3D Printing
• Material: Photopolymer Resin
• Finish: Unpainted / Unprimed
• Configuration: Multi-Part Resin Model
• Assembly: Required
• Production Type: Made to Order
• Country of Production: United Kingdom
• Digital Files Included: No

High-detail ARF Trooper & 501st Legion AT-RT resin collector sculpture designed by SW3D and professionally produced by Prime Forge as a premium physical collector model.

Advanced Recon Force Troopers, commonly known as ARF Troopers, were specialised clone troopers trained for reconnaissance and battlefield scouting.

Their lighter specialised armour was designed around mobility and reconnaissance duties, while vehicles such as the All Terrain Reconnaissance Transport – AT-RT gave individual troopers substantially greater battlefield mobility and firepower.

This sculpture represents a 501st Legion ARF Trooper mounted with an AT-RT, combining one of the most recognisable Clone formations with the distinctive two-legged reconnaissance walker.

The composition creates considerably more physical presence than a conventional standing character statue, with the mechanical AT-RT forming a major part of the overall display.

SW3D's original release is designed at 1:8 scale with an approximately 475mm overall dimension, making this a substantial collector piece despite the smaller numerical scale.

For painters, the sculpture provides an excellent mixture of Clone armour, fabric, weapons, machinery, mechanical components and environmental surfaces.

The distinctive white armour and 501st blue markings can be displayed clean or heavily weathered using scratches, chipped surfaces, dirt and battlefield wear.

The AT-RT provides extensive opportunities for metallic finishes, painted armour panels, grease, dust, grime, chipped paint and mechanical weathering.

Combining relatively clean Clone armour with a heavily weathered walker can create particularly strong visual contrast across the finished sculpture.

High-resolution 16K resin printing helps preserve helmet details, armour panels, weapons, mechanical components, walker surfaces and other fine sculpted elements with excellent definition.

This ARF Trooper & 501st Legion AT-RT Sculpture is supplied at the original 1:8 scale.

The original SW3D release information gives the complete sculpture an approximate overall dimension of 475mm / 47.5cm at 1:8 scale.

📐 Prime Forge Statue Scale Reference:

• 1:4 Scale: Standard 180cm character = approx. 45cm character height
• 1:6 Scale: Standard 180cm character = approx. 30cm character height
• 1:8 Scale: Standard 180cm character = approx. 22.5cm character height
• 1:10 Scale: Standard 180cm character = approx. 18cm character height
• 1:12 Scale: Standard 180cm character = approx. 15cm character height

The standard measurements above refer to character height only. This sculpture is substantially taller because the ARF Trooper is presented together with the AT-RT walker and display base.

Overall dimensions can also vary slightly during physical production and finishing.

Custom scaling may be available on request where technically practical.

Prime Forge collector models are produced exclusively using high-resolution 16K resin 3D printing to capture fine sculpted details.

At its original 1:8 scale, this large sculpture is supplied as a multi-part resin collector model.

Components of the ARF Trooper, AT-RT walker, weapon system, mechanical sections and display base may be supplied separately according to the original SW3D model configuration.

The multi-part configuration provides easier access for painting and helps protect individual components during transport.

Assembly is required. We recommend test fitting all components before gluing and using cyanoacrylate / super glue suitable for resin models.

The model should be primed using a suitable miniature or model primer before painting.

Every model is professionally cleaned, prepared and fully UV cured before dispatch.

Approximately 95% of printing supports are removed during production; however, some micro-support contact points, small support remnants or minor surface marks may remain.

Buyers should expect normal hobby preparation including light cleanup, minor sanding and test fitting before assembly, priming and painting.

Any remaining supports on the cured resin should be carefully removed using flush cutters or a sharp hobby knife. Cut close to the surface rather than pulling or snapping supports away, as this can damage fine details.

Remaining support marks can be gently smoothed using fine-grit sandpaper or sanding sticks, approximately 400–800 grit. Work lightly and take particular care around fine sculpted details.

Avoid breathing resin dust when sanding and use appropriate protective equipment.

• Quantity: 1 Complete Sculpture
• Character: ARF Trooper
• Unit: 501st Legion
• Vehicle: AT-RT Walker
• Series: The Clone Wars
• Designer / Studio: SW3D / StarWars3DModels
• Collection: Prime Forge
• Scale: 1:8 Collector Scale
• Approx. Overall Size: 47.5cm
• Genre: Science Fiction / Military
• Format: Physical 3D Printed Resin Sculpture
• Print Quality: 16K High Detail Resin
• Material: Photopolymer Resin
• Finish: Unpainted / Unprimed
• Painting Required: Yes
• Assembly: Required
• Production Type: Made to Order
• Country of Production: United Kingdom
• Suitable For: Collectors, Painters & Hobbyists
• Digital Files Included: No

This listing includes 1× physical SW3D ARF Trooper & 501st Legion AT-RT 1:8 scale resin collector sculpture.

The Trooper, AT-RT and associated components are supplied unassembled where applicable, unpainted and unprimed.

Painted examples and digital renders are shown to demonstrate the intended appearance of the finished sculpture.

Any scenery or additional display items not forming part of the actual model are shown for display purposes only.

No digital STL files are included.

The ARF Trooper, AT-RT walker and individual components are carefully packaged to help protect the helmet, weapons, walker legs, mechanical elements and other delicate resin details during transit.

Smaller or particularly fragile components may be individually protected where appropriate.

Every Prime Forge collector model is made to order in the United Kingdom.

Models are professionally cleaned, prepared and fully UV cured before packaging.

Please refer to the dispatch estimate shown on the eBay listing for current production times.

You will receive 1× physical SW3D ARF Trooper & 501st Legion AT-RT resin sculpture.

Supplied unassembled where applicable, unpainted and unprimed. No digital STL files are included.