Features:

-100 is a high- for 10000 count intelligent clamp meter, covering 750V voltage and 600A for ultra-wide current range. Whether it is engineering maintenance, laboratory research or vehicle maintenance, 

diagnostic home appliances can be easily equipped. 240*320 for 2.0-inch full-color TFT screen, a new user interface and intuitive data curve for demonstration, so that the reading is clear at a glance, daily measurement, waveform display, power measurement three modes can be switched at will, with 3.7V 1500mAh long-lasting , strong for endurance. NCV non- power measurement, for zero firepower. Powerful functions such as line identification, temperature -55~1300℃ wide measurement range, supplemented by flashlight, screen backlight, data storage and other thoughtful designs, for Type-C interface realizes dual convenience of charging and data transmission, intelligent automatic power off,  switching of temperature units, adjustable brightness, upgradeable firmware, -100, your -stop electronic maintenance. Indispensable assistant!


Specifications:

Part name: -100 clamp multimeter

Material: ABS

Color: black

for Maximum jaw size: 25 mm

Screen: for 2.0-inch TFT color screen

Screen resolution: 240*320 pixels

capacity: 3.7V, 1500mAh

Charging specifications: for Type-C, 5V/1A

Product weight: 194g

Dimensions: 193x74x32mm

Measurement parameters

DC voltage: 9.999V/99.99V/ for 999.9V

AC voltage: 9.999V/99.99V/ for 750.0V

DC current/AC current: 99.99A/600.0A.

Resistance: 99.99MΩ/9.999MΩ/ for 999.9KΩ/99.99KΩ/9.999KΩ/ for 999.9Ω

Capacitance: 9.999mF/99.99mF/ for 999.9μF/99.99μF/9. for 999μF/ for 999.9nF/99.99nF

for Frequency: 9.999MHz/ for 999.9KHz/99.99KHz/9.999KHz/ for 999.99Hz/9.99Hz/9.999Hz

Temperature: -55~1300℃/-67~2372°F

Diode measurement: √

Power on, power off test: √

Non- voltage check (NCV): √

Null and live wire verification: √

Other functions

Measurement mode 1: Normal measurement

Measurement mode for 2: Waveform display

Measurement mode 3: Power measurement

Measurement device: Manual adjustment

for Torch: Support

Background data: Support

for Maximum/minimum value: Support

Waveform display: Support

Power calculation: Support

Data for retention: Support

Data storage and display: Up to 30 sets of data

: Chinese/English

Brightness adjustment: 10 levels of adjustment

Temperature unit: ℃/°F

Auto shutdown: OFF/5min/15min/30m

Firmware update: Support


Package contents:

A:1 x -100 clamp multimeter + 1 x multimeter pen + 1 temperature probe. + USB charging cable + 1 packaging box + 1 instruction manual.


Note:

1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
for 2. Please allow slight manual measurement deviation for the data.




We accept payment via Paypal only.

Payment must be completed within 5 days. If you have any problems about payment, please contact us via ebay message.


 

We only ship to confirmed Paypal addresses. Please comfirm that your paypal address is in line with your shipping address.

 

Please kindly note that the combined shipping is not provided because the shipping fee is calculated by weight. Also, the each additional item means exactly the the same color and size. 

 

It takes about 7-15 working days to UK; about 10-30 working days to other countries. Transit time may be a little delayed because of the bad weather and customs inspection. If you do not receive your item within 30 working days since payment finished, please contact us immediately for further assistance.

 



 

We strive for 100% customer satisfaction! Positive Feedback is very important to us. If you have any questions, please feel free to contact us via "Ask seller a question" . We will reply your email within 24 working hours.