• Original WICKED Scale: 1:6 / 100%
• Width: Approx. 319 mm / 31.9 cm
• Height: Approx. 460 mm / 46.0 cm
• Length / Depth: Approx. 245 mm / 24.5 cm
• Large-format collector sculpture
• Designed for display, collecting and detailed painting projects
• Custom scaling available upon request

📐 Standard Scale Reference:

• 1:4 Scale: Standard 180 cm character = approx. 45 cm tall
• 1:6 Scale: Standard 180 cm character = approx. 30 cm tall
• 1:8 Scale: Standard 180 cm character = approx. 22.5 cm tall
• 1:10 Scale: Standard 180 cm character = approx. 18 cm tall
• 1:12 Scale: Standard 180 cm character = approx. 15 cm tall

These measurements are general scale references based on a standard 180 cm character standing upright. Actual finished dimensions vary according to Red Sonja's pose, hair, costume, weapons, accessories, base and overall composition.

📏 Original 100% Model Dimensions:

Measurements are based on the original WICKED 100% model reference. Smaller versions are proportionally scaled from this size.

Every Prime Forge model is produced using high-resolution HeyGears resin printing. Depending on the selected scale, model geometry and preferred painting workflow, Red Sonja can be produced using a one-piece or multi-part configuration.

• 1:4 Scale: Typically produced as a multi-part resin model for easier handling, preparation, painting and assembly.
• 1:6 Scale: May be produced using the original multipart, full-piece or one-piece configuration according to production requirements.
• 1:8 Scale: Typically produced as a one-piece resin print where model geometry and dimensions allow.
• 1:10 Scale: Produced as a one-piece resin print where possible.
• 1:12 Scale: Produced as a one-piece resin print where possible.

Original WICKED Model Options:

• Multipart Sculpture
• Full-Piece Configuration
• One-Piece Version
• X-Pose Version
• Multiple Base Options
• Sword
• Axe / Hand Axe Components
• Torch and Decorative Accessories

Custom configuration available: Buyers who prefer a multi-part configuration for easier painting, masking and preparation can request this before ordering.

Weapons, base elements and delicate accessories may remain separate depending on the final production configuration. This allows easier assembly, safer transport and improved print quality.

High-quality 16K resin printed Red Sonja Sculpture designed by WICKED. Originally designed at 1:6 scale with reference dimensions of approximately 319 × 460 × 245 mm, this large-format fantasy collector statue is designed for display, collecting and detailed painting. :contentReference[oaicite:2]{index=2}

Character Background: Red Sonja is one of the most recognisable sword-and-sorcery warriors in fantasy comics, known for her formidable combat skills, independence and iconic warrior appearance.

Her combination of long red hair, warrior armour, weapons and athletic physique has made her a major figure in fantasy comics and heroic-fantasy artwork.

The WICKED Red Sonja Sculpture presents the character as a substantial full-body collector piece, with a dynamic fantasy composition featuring detailed armour, weapons, costume elements and environmental accessories.

At approximately 460 mm tall at 1:6 scale, this is a very substantial display statue rather than a conventional tabletop miniature.

The model is particularly well suited to painters looking for a large fantasy subject with opportunities for realistic skin tones, detailed red hair, leather, metal armour, weapon finishes, weathering, dirt, blood effects and fantasy display painting.

The original WICKED release provides substantial configuration flexibility, including multipart, full-piece, one-piece and X-pose versions, along with multiple base options and additional weapon/accessory components. :contentReference[oaicite:3]{index=3}

High-resolution 16K resin printing helps reproduce the character's anatomy, hair, armour, weapons, base details and smaller sculpted surfaces with excellent definition.

Post-Processing Notice: Every model is professionally cleaned and prepared before dispatch. Approximately 95% of all supports are removed during production; however, due to the nature of high-detail resin printing, some micro-support contact points, minor support remnants and light finishing work may still be required.

Buyers should expect minimal post-processing, sanding, test fitting and preparation before priming or painting.

This 3D printed statue is supplied unpainted. Assembly requirements depend on the selected scale and print configuration.

This is an independently produced physical collector model and is not affiliated with, endorsed by, sponsored by or associated with Marvel, Red Sonja Corp., Dynamite Entertainment or any other rights holder. Character and franchise references are used solely to identify the artistic subject represented by the model.

This listing is for a physical 3D printed statue only. No digital STL files are included.

Thanks for looking, stay safe.

• Character: Red Sonja
• Model: Red Sonja Sculpture
• Designer / Studio: WICKED
• Original Scale: 1:6 / 100%
• 100% Dimensions: W 319 × H 460 × L 245 mm
• Configurations: Multipart, Full-Piece, One-Piece & X-Pose
• Accessories: Sword, axe, hand axe and torch components
• Base: Multiple base options in original release
• Format: Physical 3D Printed Resin Statue
• Print Quality: High-detail 16K resin print
• Material: High-quality resin
• Printing Technology: High-resolution HeyGears resin printing
• Finish: Unpainted
• Configuration: One-piece or multi-part depending on selected scale and production requirements
• Assembly: Required / may be required depending on configuration
• Purpose: Display, collecting and painting project
• Digital Files: Not included

The statue and individual components are carefully packaged to help protect Red Sonja's hair, weapons, hands, armour, legs, base elements and other delicate details during transit.

Multi-part versions are packaged as separate components for safer transport. Weapons, accessories and particularly delicate components may be individually protected.

Each model is made to order using high-resolution HeyGears resin printing for excellent surface quality and fine-detail reproduction.

Models are professionally cleaned, prepared and UV cured before packaging. Approximately 95% of printing supports are removed during production, with delicate areas handled individually to help preserve fine surface detail.

Larger configurations can require additional production and preparation time due to the number and size of components.

Orders may be marked as dispatched once production begins.

Due to the nature of high-detail resin 3D printing, some minor support marks, micro-support contact points, sanding, cleanup, test fitting and assembly may be required.

Approximately 95% of supports are removed before shipping, but minor finishing work should be expected before priming and painting.

Statues are supplied unpainted and are intended for experienced hobbyists, collectors, model builders and painters.

Not suitable for children under 12 years due to small parts.

Securely packaged to help prevent damage during transit. Tracking provided where applicable.

Returns are accepted within 30 days of delivery in accordance with the return policy shown on this listing. Items should be returned in their original condition.

If your order arrives damaged or defective, please contact us as soon as possible with clear photographs of the item and packaging so we can help resolve the issue promptly.