eBay

PRODUCT DESCRIPTION

Iwata Revolution HP-CR Airbrush

0.5 mm Gravity Feed • Dual Action • Made in Japan • Model R4500

AUTHORISED UK IWATA DEALER

Why the Revolution HP-CR 👇

✅	The 0.5 mm nozzle sprays thicker paints — primers, metallics, varnishes — with less thinning and far less clogging than a fine-detail airbrush.
✅	Runs clean atomisation at a low 20–30 psi, so it pairs happily with almost any hobby compressor.
✅	Genuine Japanese build with a spring-steel needle and solvent-resistant PTFE packing — it takes a beating and keeps going.
✅	Ergonomic comfort handle and an enlarged chucking nut make long sessions and needle cleaning genuinely easy.

🖌️ About This Airbrush

The Revolution HP-CR is the workhorse of Iwata's entry-level range — and "entry-level" for Iwata still means Japanese engineering, not a compromise. It's a gravity-feed, dual-action airbrush built around a 0.5 mm head, which makes it the natural choice for coverage work: priming, base-coating, zenithal, varnishing and blocking in large areas quickly and evenly.

Because the 0.5 mm nozzle and needle are more forgiving, you can spray heavier and less-thinned paint without constant tip-dry — a real advantage when you're getting paint down fast or working with thicker mediums. Dual-action gives you independent control of air and paint for smooth gradients and transitions.

If you want one airbrush that primes, base-coats and varnishes reliably for years, the HP-CR is a proven, honest tool at a fair price. For very fine line work you'll want a smaller nozzle — see the honest note further down; we'd rather tell you than sell you the wrong thing.

📊 Specifications

Model	Revolution HP-CR (R4500)
Feed type	Gravity feed
Trigger action	Dual action
Nozzle size	0.5 mm
Head system	R5 (screw-in nozzle)
Cup capacity	7 ml (0.24 oz / 1/3 oz) with lid
Optimal pressure	20–30 psi (0.14–0.21 MPa)
Needle	Spring steel
Seals	PTFE, solvent-resistant
Handle	Ergonomic comfort handle
Country of manufacture	Japan
Warranty	5-year international; 10-year UK (see below)

📦 What's in the Box

▪	Iwata Revolution HP-CR airbrush with integral 7 ml gravity cup and lid
▪	Iwata nozzle spanner (for correct-torque nozzle removal)
▪	Iwata Lube (needle and lever lubricant)
▪	Manufacturer's instructions

🔧 Spare Parts & Compatibility

The HP-CR uses the Iwata R5 head system (0.5 mm). These are the wear parts you'll eventually reorder — all available genuine:

▪	0.5 mm needle (R5, spring steel)
▪	0.5 mm nozzle (R5, screw-in)
▪	Nozzle cap and needle cap (R5)
▪	PTFE needle packing screw set

Cross-compatibility, straight:

✓ The 0.5 mm needle in this airbrush is the same needle used in the Iwata Revolution HP-BCR, HP-SAR and Eclipse HP-BCS — handy if you own more than one.

✗ It does not share parts with the 0.3 mm Revolution models (HP-AR / BR / CR3 / TR1 use the R3 head system). 0.5 mm and 0.3 mm parts are not interchangeable.

✗ The Revolution nozzle is screw-in (threaded) — unlike the Eclipse's push-in compression nozzle. Never force an Eclipse nozzle into it, or vice-versa.

💡 Pro Tips

▸	Thin acrylics to roughly semi-skimmed milk consistency and start at 20–30 psi. The 0.5 mm is forgiving — you don't need to over-thin.
▸	Mid-session tip-dry? Ease the needle back through the enlarged chucking nut to clear the tip without a full strip-down.
▸	Seat the nozzle with the supplied spanner — snug, not gorilla-tight. Threaded nozzles crack if over-tightened.
▸	A drop of Iwata Lube on the needle and packing keeps the trigger smooth and makes the PTFE seal last.

⚖️ Honest Limitations

• The 0.5 mm is a coverage and versatility nozzle, not a fine-detail nozzle. It'll pull a fine line, but it's happiest on medium-to-broad work. For crisp small-scale detail, a 0.3 mm (Revolution HP-CR3 / BR) or a 0.35 mm Eclipse HP-CS is the better tool.

• Revolution is Iwata's entry tier. Build and trigger refinement sit below the Eclipse, HP Plus and Custom Micron lines. It's superb value and very durable — but if you specifically want the smoothest trigger and finest atomisation, look up-range.

🚚 Shipping & Warranty

📦	Order before 3 PM Mon–Fri and we dispatch the same day from Derby.
🚚	Sent tracked via Royal Mail. We're in the Midlands next to the Royal Mail superhub — a genuine speed advantage across the UK.
🛡️	5-year international limited warranty (Anest Iwata-Medea), extended to 10 years in the UK by The Airbrush Company Ltd for purchases from an authorised UK reseller — which we are. Keep your proof of purchase.

Hobby Heaven

By Hobbyists. For Hobbyists.

Authorised Iwata dealer • Family-run, Derby UK • Real advice, no marketing fluff

Iwata Revolution HP-CR Airbrush 0.5 mm Gravity Feed • Dual Action • Made in Japan • Model R4500 AUTHORISED UK IWATA DEALER Why the Revolution HP-CR 👇 ✅The 0.5 mm nozzle sprays thicker paints — primers, metallics, varnishes — with less thinning and far less clogging than a fine-detail airbrush. ✅Runs clean atomisation at a low 20–30 psi, so it pairs happily with almost any hobby compressor. ✅Genuine Japanese build with a spring-steel needle and solvent-resistant PTFE packing — it takes a beating and keeps going. ✅Ergonomic comfort handle and an enlarged chucking nut make long sessions and needle cleaning genuinely easy. 🖌️ About This Airbrush The Revolution HP-CR is the workhorse of Iwata's entry-level range — and "entry-level" for Iwata still means Japanese engineering, not a compromise. It's a gravity-feed, dual-action airbrush built around a 0.5 mm head, which makes it the natural choice for coverage work: priming, base-coating, zenithal, varnishing and blocking in large areas quickly and evenly. Because the 0.5 mm nozzle and needle are more forgiving, you can spray heavier and less-thinned paint without constant tip-dry — a real advantage when you're getting paint down fast or working with thicker mediums. Dual-action gives you independent control of air and paint for smooth gradients and transitions. If you want one airbrush that primes, base-coats and varnishes reliably for years, the HP-CR is a proven, honest tool at a fair price. For very fine line work you'll want a smaller nozzle — see the honest note further down; we'd rather tell you than sell you the wrong thing. 📊 Specifications ModelRevolution HP-CR (R4500) Feed typeGravity feed Trigger actionDual action Nozzle size0.5 mm Head systemR5 (screw-in nozzle) Cup capacity7 ml (0.24 oz / 1/3 oz) with lid Optimal pressure20–30 psi (0.14–0.21 MPa) NeedleSpring steel SealsPTFE, solvent-resistant HandleErgonomic comfort handle Country of manufactureJapan Warranty5-year international; 10-year UK (see below) 📦 What's in the Box ▪Iwata Revolution HP-CR airbrush with integral 7 ml gravity cup and lid ▪Iwata nozzle spanner (for correct-torque nozzle removal) ▪Iwata Lube (needle and lever lubricant) ▪Manufacturer's instructions 🔧 Spare Parts & Compatibility The HP-CR uses the Iwata R5 head system (0.5 mm). These are the wear parts you'll eventually reorder — all available genuine: ▪0.5 mm needle (R5, spring steel) ▪0.5 mm nozzle (R5, screw-in) ▪Nozzle cap and needle cap (R5) ▪PTFE needle packing screw set Cross-compatibility, straight: ✓ The 0.5 mm needle in this airbrush is the same needle used in the Iwata Revolution HP-BCR, HP-SAR and Eclipse HP-BCS — handy if you own more than one. ✗ It does not share parts with the 0.3 mm Revolution models (HP-AR / BR / CR3 / TR1 use the R3 head system). 0.5 mm and 0.3 mm parts are not interchangeable. ✗ The Revolution nozzle is screw-in (threaded) — unlike the Eclipse's push-in compression nozzle. Never force an Eclipse nozzle into it, or vice-versa. 💡 Pro Tips ▸Thin acrylics to roughly semi-skimmed milk consistency and start at 20–30 psi. The 0.5 mm is forgiving — you don't need to over-thin. ▸Mid-session tip-dry? Ease the needle back through the enlarged chucking nut to clear the tip without a full strip-down. ▸Seat the nozzle with the supplied spanner — snug, not gorilla-tight. Threaded nozzles crack if over-tightened. ▸A drop of Iwata Lube on the needle and packing keeps the trigger smooth and makes the PTFE seal last. ⚖️ Honest Limitations • The 0.5 mm is a coverage and versatility nozzle, not a fine-detail nozzle. It'll pull a fine line, but it's happiest on medium-to-broad work. For crisp small-scale detail, a 0.3 mm (Revolution HP-CR3 / BR) or a 0.35 mm Eclipse HP-CS is the better tool. • Revolution is Iwata's entry tier. Build and trigger refinement sit below the Eclipse, HP Plus and Custom Micron lines. It's superb value and very durable — but if you specifically want the smoothest trigger and finest atomisation, look up-range. 🚚 Shipping & Warranty 📦Order before 3 PM Mon–Fri and we dispatch the same day from Derby. 🚚Sent tracked via Royal Mail. We're in the Midlands next to the Royal Mail superhub — a genuine speed advantage across the UK. 🛡️5-year international limited warranty (Anest Iwata-Medea), extended to 10 years in the UK by The Airbrush Company Ltd for purchases from an authorised UK reseller — which we are. Keep your proof of purchase. Hobby Heaven By Hobbyists. For Hobbyists. Authorised Iwata dealer • Family-run, Derby UK • Real advice, no marketing fluff

Specifications

Power Source Air (requires compressor - not included)
Custom Bundle Yes (includes bonus HHP-1001 Masking Putty)
MPN Revolution HP-CR / R4500
Action Type Dual Action
Suitable For Model Kits, Miniatures, Nail Art, Cake Decorating, Illustration
Colour Chrome/Silver
Brand Iwata
Sub-Type Gravity Feed, Dual Action, Internal Mix
Item Airbrushing
Type Airbrushes
Working Pressure 20–30 psi (0.14–0.21 MPa)
Seal type PTFE (solvent-resistant)
Compatible With Paint Types Acrylics, Enamels, Lacquers
Country of Origin Japan
Cup Capacity 7 ml (1/3 oz) with lid

ABOUT US

Welcome to Hobby Heaven!

We're a brand built by passionate hobbyists for hobbyists. Our mission is to support all your creative endeavors, whether you're into modeling, wargaming, crafting, or art. As enthusiasts ourselves, we understand the importance of quality supplies at affordable prices.

Our carefully curated selection of high-quality materials is designed to inspire and empower hobbyists and artists alike. We're particularly proud of our innovative, cost-effective basing system - a game-changer for modelers and wargamers looking for professional results without breaking the bank.

At Hobby Heaven, we're dedicated to providing exceptional customer service and ensuring your creative projects are a success. Our team is always ready to offer advice, share techniques, or help you find the perfect supplies for your next masterpiece.

Thank you for choosing us as your trusted partner in creativity. We're excited to be part of your hobby journey!

PAYMENT

We accept payment by PayPal and Credit / Debit cards entered on eBay only. You must be registered with PayPal or eBay to buy from us.

SHIPPING

We primarily use RM24 for shipping, and we can arrange other courier services upon request. For large international shipments, we utilize FedEx. Once your order has been dispatched, you will receive tracking information. For domestic deliveries, the estimated arrival time is usually 1-4 days.

RETURNS

Please ensure that all items are returned in their original condition. Returns are processed within 1-2 business days of receipt. Refunds are issued minus the original shipping cost. All returns are handled in accordance with eBay's policies.

At Hobby Heaven, we strive to provide our customers with the best possible online shopping experience. Our commitment to excellent customer service extends well beyond the delivery of your order.

We encourage you to reach out with any questions or concerns regarding your purchase. The most convenient way to contact us is through the eBay messaging system.

Our dedicated customer service team responds to messages within 24 hours, Monday through Friday, between 8:00 AM and 3:00 PM GMT.

Your satisfaction is our top priority. We're here to help and look forward to assisting you!

WHAT OUR CUSTOMERS ARE SAYING ABOUT US

Order delivered on time with no issues	nicholaparkh (234 )
Order delivered on time with no issues	beano4435 (194 )
Order delivered on time with no issues	crad47 (412 )
Order delivered on time with no issues	smigg-the-mi (92 )
Order delivered on time with no issues	hariali (168 )