Paasche Type VL Airbrush with 10ft Braided Air Hose
Double action, internal mix, siphon feed. Made in the USA.

A genuine Paasche Type VL airbrush, offered with a factory braided air hose. The VL has been Paasche's mainstay model for decades and remains in production today: double action, internal mix, siphon fed, with a machined brass body, chrome plated, and a painted handle of the older pattern.

It is a workhorse rather than a fine detail tool, equally happy with thin inks and with heavier media such as primers, enamels and automotive paints. Typical uses are model and figure painting, restoration touch-in and small component spraying, signwriting, textiles and general craft work. The line adjustment roller in front of the trigger allows the VL to be used single action as well as double, and it suits left or right handed users equally.

The head assembly is present and fitted: head, nickel silver tip and stainless needle. The head unscrews cleanly and the needle is straight. The gold tone of the tip is the natural colour of nickel silver, not corrosion or tarnish.

The head carries three identifying grooves, which indicates the size 3 medium head, 0.73mm, the size Paasche fit as standard. Paasche do not print the size on these parts, so the head is photographed in close-up for you to satisfy yourself.

The hose measures approximately 317cm, a factory 10ft length, end to end including fittings. Current VL sets are supplied with a 6ft hose, so this is the longer option.

This example came out of a house clearance and is offered exactly as found. The current equivalent VL-3AS set retails at £171.40 including VAT from the UK Paasche distributor, and spare parts, cups and bottles remain readily available, so anything missing here is straightforward to source.

Specification
Brand: Paasche Airbrush Company
Model: Type VL
Serial number: 364459
Action: Double action
Mix: Internal mix
Feed: Siphon (bottom) feed
Head fitted: Size 3 (0.73mm), three grooves
Head assembly: Head, nickel silver tip and stainless needle, all present
Finish: Chrome plated body, red handle
Air inlet: 1/4-20 Paasche thread
Hose: Braided, approximately 317cm (factory 10ft length)
Country of manufacture: United States
Please note
Sold untested. No colour cup or bottle is present, so the airbrush has not been sprayed.
Supplied as photographed: airbrush and hose only. No cup, bottle assembly, needle protecting cap, wrench, hanger, instructions or box.
Head size is identified from the three grooves rather than a printed marking. Please judge from the photographs.
Some dried residue around the fluid socket and light handling marks to the chrome, consistent with age and use.
Fittings are American thread sizes. An adapter is likely to be required to connect to a UK compressor.
Posted within one working day, tracked and carefully packed. Please message with any questions before buying.