eBay

PRODUCT DESCRIPTION

DSPIAE | CB-10

Carbon Fibre Sanding Board — 10 mm

The everyday width. Wide enough to keep a surface flat, narrow enough to work around detail.

⚠️ Sandpaper is not included

This is the board. You choose the self-adhesive sandpaper and the grit — which is the point of it, but worth knowing before you order. See our other items for compatible sheets.

🎯 The width you'll reach for most

Most of what a modeller actually sands is neither an open panel nor a crevice. It is a seam running down the side of a part, a mould line along an edge, a join between two halves — and there is almost always something raised nearby that a wide board would catch on.

A 25 mm board fouls on the adjacent detail. A 5 mm board fits, but takes four times as long and is easy to tip onto one edge without noticing, which cuts a groove instead of a flat.

10 mm is the width that handles the everyday work. Broad enough that pressure spreads and the surface stays flat, narrow enough to run alongside raised detail without touching it. If you were only going to own one of these boards, this is the one to own.

📋 Two strips per sheet — and the offcut isn't waste

DSPIAE's self-adhesive sandpaper comes as 25 × 75 mm sheets. This board is 10 mm wide, so one sheet gives you two full-length strips for it.

And the piece left over is exactly 5 mm wide — which is the width of the CB-5 board in the same range. If you own both, a single sheet dresses this board twice and the narrow one once, with nothing thrown away. Cut along a steel rule and keep the spares together.

✅ One millimetre thick — and still rigid

At 1 mm, this board is thinner than most sanding tools by some margin. But thin is only useful if it stays flat.

A 1 mm strip of plastic or acrylic would bend under finger pressure and simply follow whatever it was pressed against, wrapping the abrasive over edges and rounding off corners you wanted sharp. Carbon fibre composite is stiff for its thickness in a way no plastic is — so you get the access and the flatness together. It will not swell, warp or delaminate either, so wet sanding is entirely fine.

📦 What's in the box

✔ 1 × CB-10 carbon fibre sanding board, 10 × 75 × 1 mm

✔ Waterproof numbered grit sticker

✘ No sandpaper — sold separately

🤔 This one, or the full set?

DSPIAE make this board in three widths, and also sell all three together as the CB-S set:

Board	Best at
CB-5	Tight gaps, narrow angles, curved surfaces
CB-10 this one	Everyday seams and mould lines, working around detail
CB-25	Open panels and larger surfaces, keeping a whole plane flat

Straight answer: if you want all three widths, buy the CB-S set — it works out better than three singles and we would rather tell you. This listing makes sense if 10 mm is the only width you need, or if you want a second CB-10 so you can keep one dressed with coarse paper and one with fine.

📑 Specifications

Brand	DSPIAE
Model	CB-10
Type	Flat carbon fibre sanding board
Dimensions	10 × 75 × 1 mm
Material	Carbon fibre
Compatible sandpaper	25 × 75 mm self-adhesive, trimmed to width
Wet sanding	Yes — will not swell or warp
Sandpaper	Not included

💡 Getting the best from it

Cut your strips against a steel rule. The benefit of a rigid board is a flat, square result — a wavy paper edge undoes that at the boundary of every stroke. Cut a few at once while you have the rule out.

Keep it flat to the work. Easier at 10 mm than on a narrower board, but still worth watching — tipping onto one edge cuts a groove rather than a flat.

Drop to 5 mm only when you have to. If this board fits, use it — the wider contact patch keeps the surface flatter. Save the narrow one for where 10 mm genuinely will not go.

Use the grit sticker. Once there is paper on it you cannot tell what grit it is by looking.

Clean it before re-papering. Dust or old adhesive under a fresh strip means it lifts at the corners within minutes.

⚖️ Honest limitations

No sandpaper included. The board does nothing on its own. Order sheets alongside it.

Still slower than a wide board on open surfaces. For a large flat panel the 25 mm board covers ground considerably faster and holds the plane better.

Flat ends only. For awkward internal geometry you want the irregular-ended sticks in the CFB-S range.

Small part with sharp edges once loaded. Not suitable for young children.

🚚 Dispatch & delivery

✅ Same-day dispatch on orders placed before 3 PM, Monday to Friday

✅ Sent by Royal Mail 24 Tracked from our unit in Derby — full tracking from our door to yours, no import charges and no customs delays

✅ Packed properly. Tools travel in protective packaging, not a bare envelope

✅ Adding sandpaper or other boards to your order? Message us — we combine postage

Hobby Heaven

By Hobbyists. For Hobbyists.

A family-run UK model and miniature supplier. We use the tools we sell, and we will tell you when something is not right for the job you have described.

DSPIAE | CB-10 Carbon Fibre Sanding Board — 10 mm The everyday width. Wide enough to keep a surface flat, narrow enough to work around detail. ⚠️ Sandpaper is not included This is the board. You choose the self-adhesive sandpaper and the grit — which is the point of it, but worth knowing before you order. See our other items for compatible sheets. 🎯 The width you'll reach for most Most of what a modeller actually sands is neither an open panel nor a crevice. It is a seam running down the side of a part, a mould line along an edge, a join between two halves — and there is almost always something raised nearby that a wide board would catch on. A 25 mm board fouls on the adjacent detail. A 5 mm board fits, but takes four times as long and is easy to tip onto one edge without noticing, which cuts a groove instead of a flat. 10 mm is the width that handles the everyday work. Broad enough that pressure spreads and the surface stays flat, narrow enough to run alongside raised detail without touching it. If you were only going to own one of these boards, this is the one to own. 📋 Two strips per sheet — and the offcut isn't waste DSPIAE's self-adhesive sandpaper comes as 25 × 75 mm sheets. This board is 10 mm wide, so one sheet gives you two full-length strips for it. And the piece left over is exactly 5 mm wide — which is the width of the CB-5 board in the same range. If you own both, a single sheet dresses this board twice and the narrow one once, with nothing thrown away. Cut along a steel rule and keep the spares together. ✅ One millimetre thick — and still rigid At 1 mm, this board is thinner than most sanding tools by some margin. But thin is only useful if it stays flat. A 1 mm strip of plastic or acrylic would bend under finger pressure and simply follow whatever it was pressed against, wrapping the abrasive over edges and rounding off corners you wanted sharp. Carbon fibre composite is stiff for its thickness in a way no plastic is — so you get the access and the flatness together. It will not swell, warp or delaminate either, so wet sanding is entirely fine. 📦 What's in the box ✔ 1 × CB-10 carbon fibre sanding board, 10 × 75 × 1 mm ✔ Waterproof numbered grit sticker ✘ No sandpaper — sold separately 🤔 This one, or the full set? DSPIAE make this board in three widths, and also sell all three together as the CB-S set: Board Best at CB-5 Tight gaps, narrow angles, curved surfaces CB-10this one Everyday seams and mould lines, working around detail CB-25 Open panels and larger surfaces, keeping a whole plane flat Straight answer: if you want all three widths, buy the CB-S set — it works out better than three singles and we would rather tell you. This listing makes sense if 10 mm is the only width you need, or if you want a second CB-10 so you can keep one dressed with coarse paper and one with fine. 📑 Specifications BrandDSPIAE ModelCB-10 TypeFlat carbon fibre sanding board Dimensions10 × 75 × 1 mm MaterialCarbon fibre Compatible sandpaper25 × 75 mm self-adhesive, trimmed to width Wet sandingYes — will not swell or warp SandpaperNot included 💡 Getting the best from it Cut your strips against a steel rule. The benefit of a rigid board is a flat, square result — a wavy paper edge undoes that at the boundary of every stroke. Cut a few at once while you have the rule out. Keep it flat to the work. Easier at 10 mm than on a narrower board, but still worth watching — tipping onto one edge cuts a groove rather than a flat. Drop to 5 mm only when you have to. If this board fits, use it — the wider contact patch keeps the surface flatter. Save the narrow one for where 10 mm genuinely will not go. Use the grit sticker. Once there is paper on it you cannot tell what grit it is by looking. Clean it before re-papering. Dust or old adhesive under a fresh strip means it lifts at the corners within minutes. ⚖️ Honest limitations No sandpaper included. The board does nothing on its own. Order sheets alongside it. Still slower than a wide board on open surfaces. For a large flat panel the 25 mm board covers ground considerably faster and holds the plane better. Flat ends only. For awkward internal geometry you want the irregular-ended sticks in the CFB-S range. Small part with sharp edges once loaded. Not suitable for young children. 🚚 Dispatch & delivery ✅ Same-day dispatch on orders placed before 3 PM, Monday to Friday ✅ Sent by Royal Mail 24 Tracked from our unit in Derby — full tracking from our door to yours, no import charges and no customs delays ✅ Packed properly. Tools travel in protective packaging, not a bare envelope ✅ Adding sandpaper or other boards to your order? Message us — we combine postage Hobby Heaven By Hobbyists. For Hobbyists. A family-run UK model and miniature supplier. We use the tools we sell, and we will tell you when something is not right for the job you have described.

Specifications

Brand Dspiae
Type Sanding Board / Sanding Stick
Number of Pieces 1
MPN CB-10
Suitable For Scale Models, Gunpla, Miniatures, Airbrushing, Acrylic/Lacquer/En
Country of Origin China
Colour Red / Black

ABOUT US

Welcome to Hobby Heaven!

We're a brand built by passionate hobbyists for hobbyists. Our mission is to support all your creative endeavors, whether you're into modeling, wargaming, crafting, or art. As enthusiasts ourselves, we understand the importance of quality supplies at affordable prices.

Our carefully curated selection of high-quality materials is designed to inspire and empower hobbyists and artists alike. We're particularly proud of our innovative, cost-effective basing system - a game-changer for modelers and wargamers looking for professional results without breaking the bank.

At Hobby Heaven, we're dedicated to providing exceptional customer service and ensuring your creative projects are a success. Our team is always ready to offer advice, share techniques, or help you find the perfect supplies for your next masterpiece.

Thank you for choosing us as your trusted partner in creativity. We're excited to be part of your hobby journey!

PAYMENT

We accept payment by PayPal and Credit / Debit cards entered on eBay only. You must be registered with PayPal or eBay to buy from us.

SHIPPING

We primarily use RM24 for shipping, and we can arrange other courier services upon request. For large international shipments, we utilize FedEx. Once your order has been dispatched, you will receive tracking information. For domestic deliveries, the estimated arrival time is usually 1-4 days.

RETURNS

Please ensure that all items are returned in their original condition. Returns are processed within 1-2 business days of receipt. Refunds are issued minus the original shipping cost. All returns are handled in accordance with eBay's policies.

At Hobby Heaven, we strive to provide our customers with the best possible online shopping experience. Our commitment to excellent customer service extends well beyond the delivery of your order.

We encourage you to reach out with any questions or concerns regarding your purchase. The most convenient way to contact us is through the eBay messaging system.

Our dedicated customer service team responds to messages within 24 hours, Monday through Friday, between 8:00 AM and 3:00 PM GMT.

Your satisfaction is our top priority. We're here to help and look forward to assisting you!

WHAT OUR CUSTOMERS ARE SAYING ABOUT US

Order delivered on time with no issues	nicholaparkh (234 )
Order delivered on time with no issues	spruetwo (244 )
Order delivered on time with no issues	beano4435 (194 )
Order delivered on time with no issues	julma8824 (1 )
Order delivered on time with no issues	manstoosickt (24 )