Same-day 1st class shipping: Monday - Friday by 3.30PM (GMT-0).

PRODUCT DESCRIPTION

DSPIAE  |  PT-SP06
Acrylic Sanding Pad Set — #600
Three widths, one grit, and a colour you can identify from across the bench.
⚠️ #600 is a working grit — don't stop here
This is one of the coarser sets in the range and it removes material properly, which is exactly what you want when levelling a seam or cleaning up where a part came off the runner. But it leaves scratches. On an unpainted kit they are obvious. Under paint they still show, because primer fills fine scratches and not coarse ones. Always follow #600 with at least #800, and ideally #1000 or finer, before anything goes on the surface.
🎨 You will never wonder which grit this is

Every modeller has the same drawer: four or five sanding sticks with paper on them, all identical, and no idea which is #400 and which is #600 without testing one on a piece of scrap. The usual fix is a sticker, which falls off, or a marker pen, which wears away.

DSPIAE solved it at the factory. Each grit in this range is a different colour of acrylic, with the grit number silkscreen printed into the pad rather than stuck on. Nothing to peel, nothing to rub off.

Model Colour Grit
PT-SP02Yellow#280
PT-SP04Orange#400
PT-SP06Red#600 — this set
PT-SP08Purple#800
PT-SP10Light blue#1000
PT-SP12Dark blue#1200
PT-SP15Green#1500
📏 One grit, three widths

Most sanding boards give you one width and expect you to buy several. This set gives you the same grit in three sizes, so one purchase covers everything from an open panel to a crevice.

Width What it's for
25 mmOpen panels, hull sides, larger flat surfaces
10 mmMedium areas, working around moderate surface detail
5 mmTight gaps, narrow channels, between raised details
All three pads are 75 mm long and 2.5 mm thick. Only the width changes.
✅ Why a rigid backing matters

Sandpaper held between your fingers, or stuck to a foam block, flexes. That flex wraps the abrasive over the edges of whatever you are working on — so you set out to level a seam and finish with a softened panel edge you wanted crisp.

Laser-cut acrylic at 2.5 mm does not flex under finger pressure. Flat stays flat, edges stay sharp. The edges of the pads themselves are laser cut and then hand polished, so there is no burr to drag across the part while you work.

📦 What's in the box
✔ 1 × acrylic sanding pad, 25 mm wide
✔ 1 × acrylic sanding pad, 10 mm wide
✔ 1 × acrylic sanding pad, 5 mm wide
✔ 2 × sheets of self-adhesive #600 sandpaper
Sandpaper is included. Two sheets to get you started — enough to fit all three pads and have some in reserve. Refills are available separately when they wear out.
📑 Specifications
BrandDSPIAE
ModelPT-SP06
TypeAcrylic sanding pad set
Grit#600
ColourRed
MaterialAcrylic, laser cut and hand polished
Pad widths25 / 10 / 5 mm
Pad length & thickness75 × 2.5 mm
Grit markingSilkscreen printed, colour coded
Sandpaper included2 sheets, self-adhesive #600
Net weightApprox. 8.3 g
💡 Getting the best from it
Work through the grits, do not jump. Roughly: #280 or #400 for heavy shaping, #600 to level and clean up cut marks, #800 to #1000 to refine, #600 and #1500 to finish. Skipping straight to a fine grit only polishes the scratches the coarse one left behind.
Clean the acrylic before applying fresh paper. Dust or old adhesive residue under a new sheet means it lifts at the corners within minutes.
Keep the pad flat to the work. The rigidity is what gives you a flat result — tipping it onto an edge throws that away and puts a facet where you wanted a corner.
Use the 5 mm pad flat, not as a lever. See the limitations below.
Check your progress often. At #600 material comes off faster than you expect, especially on soft styrene. Two or three strokes, look at it, carry on. It is far easier to take a little more off than to fill what you overshot.
⚖️ Honest limitations
It leaves scratches. Stated at the top and worth repeating, because it is the one mistake people make with a coarse grit: #600 is a step in a sequence, not the end of one. Stopping here and painting means the scratch pattern shows through the finish.
The 5 mm pad is a thin strip of acrylic. At 2.5 mm thick and 5 mm wide it is rigid — which is exactly what makes it useful — but rigid acrylic snaps rather than bends. Sand with it flat against the surface and it will last indefinitely. Lever it sideways into a gap and it will break. The 25 mm pad is noticeably more robust.
Two sheets of sandpaper is a starter quantity. Enough to fit all three pads with some spare, not a lifetime supply. Refills are a separate purchase.
These are flat pads. Excellent on panels and straight surfaces, not the right tool for curves or internal corners.
🚚 Dispatch & delivery
✅ Same-day dispatch on orders placed before 3 PM, Monday to Friday
✅ Sent by Royal Mail 24 Tracked from our unit in Derby — full tracking from our door to yours, no import charges and no customs delays
✅ Packed properly. Tools travel in protective packaging, not a bare envelope
✅ Buying several grits? Message us — we combine postage, and working through the colours in sequence is exactly how these are designed to be used
Hobby Heaven
By Hobbyists. For Hobbyists.
A family-run UK model and miniature supplier. We use the tools we sell, and we will tell you when something is not right for the job you have described.

Specifications

  • Brand Dspiae
  • Type Sanding Pad Set / Sanding Stick
  • Number of Pieces 5
  • Grit 600
  • MPN PT-SP06
  • Suitable For Scale Models, Gunpla, Miniatures, Airbrushing, Acrylic/Lacquer/En
  • Country of Origin China
  • Colour Red / Black

Welcome to Hobby Heaven!

We're a brand built by passionate hobbyists for hobbyists. Our mission is to support all your creative endeavors, whether you're into modeling, wargaming, crafting, or art. As enthusiasts ourselves, we understand the importance of quality supplies at affordable prices.

Our carefully curated selection of high-quality materials is designed to inspire and empower hobbyists and artists alike. We're particularly proud of our innovative, cost-effective basing system - a game-changer for modelers and wargamers looking for professional results without breaking the bank.

At Hobby Heaven, we're dedicated to providing exceptional customer service and ensuring your creative projects are a success. Our team is always ready to offer advice, share techniques, or help you find the perfect supplies for your next masterpiece.

 

Thank you for choosing us as your trusted partner in creativity. We're excited to be part of your hobby journey!

We accept payment by PayPal and Credit / Debit cards entered on eBay only. You must be registered with PayPal or eBay to buy from us.

 

We primarily use RM24 for shipping, and we can arrange other courier services upon request. For large international shipments, we utilize FedEx. Once your order has been dispatched, you will receive tracking information. For domestic deliveries, the estimated arrival time is usually 1-4 days.

Please ensure that all items are returned in their original condition. Returns are processed within 1-2 business days of receipt. Refunds are issued minus the original shipping cost. All returns are handled in accordance with eBay's policies.

At Hobby Heaven, we strive to provide our customers with the best possible online shopping experience. Our commitment to excellent customer service extends well beyond the delivery of your order.

We encourage you to reach out with any questions or concerns regarding your purchase. The most convenient way to contact us is through the eBay messaging system.

Our dedicated customer service team responds to messages within 24 hours, Monday through Friday, between 8:00 AM and 3:00 PM GMT.

 

Your satisfaction is our top priority. We're here to help and look forward to assisting you!

WHAT OUR CUSTOMERS ARE SAYING ABOUT US

Order delivered on time with no issues crad47 (412 )
Order delivered on time with no issues manstoosickt (24 )
Order delivered on time with no issues hariali (168 )
Order delivered on time with no issues hariali (168 )
Order delivered on time with no issues herin_95 (25 )