DSPIAE | AT-TZ05
Angled "Golden Feather" Tweezers
The middle ground between straight and right-angled — and the shape most people get on with
⚠️ Before you buy this one, read the next paragraph
These are stainless steel and not anti-static. Every shop selling any tweezer in this range pastes the same manufacturer text, which mentions carbon fibre tips that stop decal film curling from static. Only three of the eight actually have them.
And one of those three is this exact shape. DSPIAE call this model "Elbow" and call AT-TZ08 "Anti-static Elbow" — same geometry, carbon fibre tips instead of steel, and it usually costs about £2 less than this. Unless you specifically want steel tips, AT-TZ08 is probably the better buy and we would rather tell you that up front than take the extra two pounds.
📌 The problem this solves
Straight tweezers make you choose. Either you hold them at a comfortable angle to your hand, in which case the tips meet the work at a slant — or you get the tips square to the work by twisting your wrist into a position that gets uncomfortable within about ninety seconds.
A bend in the arms removes the choice. Your hand rests where it wants to be and the tips still arrive square. That is the whole idea, and it is why most people who own several pairs of tweezers find themselves reaching for an angled one more often than anything else.
🔧 What an elbow bend actually gets you
▪ The bend is set back from the tip, not at it. That is what DSPIAE mean by calling this an elbow. The last section of the arm angles away, so you get a change of direction without the abrupt right-angle turn of the Crane Beak model. In practice it is a far more general-purpose shape — a right angle is excellent coming straight down onto a flat surface and awkward for everything else, whereas this improves your working angle without ruling anything out.
▪ Your hand stops blocking your view. With the tips offset from the line of your hand, you can see them approach the work all the way in. That matters most in the last two or three millimetres, which is exactly where straight tweezers hide the part behind your own knuckles.
▪ It reaches over things. Placing something on the far side of an assembled model with straight tweezers means dragging your hand across everything in between. The offset lets you come in above and beyond, which is worth a great deal once a build has parts on it you would rather not touch.
▪ Thickened arms, on purpose. DSPIAE call it a thickening design and the reason is stability. Thin springy tweezers flex under grip, and a bent arm has more scope to flex than a straight one, so the extra material matters more here than on the straight model.
▪ Arc-formed tips, polished stainless. The arc is specifically to stop parts springing out of the tips when you close on them. The polished stainless finish resists rust in a cold hobby room and gives residue nothing to key into.
On the name: DSPIAE call this one the Golden Feather. The tweezers in this range carry bird names — the 90° model is the Crane Beak, the straight one the Phoenix. Nobody in the UK uses them, which is a shame, because they are rather good.
🤔 The three bent models, side by side
| AT-TZ04 | Crane Beak — a full 90° turn right at the tip. Steel. For working straight down onto a flat surface |
| AT-TZ05 | This one. Golden Feather — elbow bend set back from the tip. Steel. The general-purpose angled pair |
| AT-TZ08 | Anti-static Elbow — the same shape as this, with carbon fibre tips. Usually about £2 cheaper |
Straight answer: most people asking for "angled tweezers" want this shape rather than the 90° one — but if you are choosing today and static, decal film or magnets feature in your work at all, buy AT-TZ08 instead. Same bend, carbon fibre tips, cheaper. Choose this steel version if you want a finer harder tip, if you grip things that would wear a composite tip, or if you already own the anti-static pair and want a second in steel. Those are good reasons. "It costs more so it must be better" is not one, and in this range it is actively wrong.
One thing we cannot tell you: DSPIAE publish a figure of 90° for the Crane Beak and give no angle at all for this model. So we can tell you the bend is set back from the tip and gentler than a right angle, because that is what the manufacturer's own naming says — but not the number of degrees. Nobody can, and anyone quoting one is guessing.
📦 What's in the box
✔ 1 × DSPIAE AT-TZ05 angled precision tweezers
✘ No other models from the range — each AT-TZ is a separate product
✘ No carbon fibre tips and no anti-static property
DSPIAE's instructions tell you to recap the tips after every use, which implies a protective cap — but they publish no packing list for this model, so we have not listed one above. Message us before ordering if it matters and we will open a box and tell you what is actually in it.
📏 Specifications
| Model | AT-TZ05 |
| Manufacturer's product names | Angled Tweezers / Elbow Tweezers / "Golden Feather" |
| Geometry | Elbow — bend set back from the tip |
| Material | Hardened stainless steel, polished |
| Arms | Thickened for stability under grip |
| Tip profile | Arc form, to reduce parts springing out |
| Anti-static | No — see AT-TZ08 for the same shape with carbon fibre tips |
| Retail pack | 150 × 40 × 10 mm, 30 g gross |
| Age guidance | Keep out of reach of children under 10 |
| EAN | 6970845569465 |
| Country of manufacture | China |
No bend angle, overall length or tip width is published for this model. DSPIAE name it for its geometry rather than its tip, and one retailer describes the tip as pointed — but that is a single source and not the manufacturer, so we have not put it in the table. Note also that two barcodes are in circulation for this product; the one above is the more widely used and is the one on our stock.
💡 Getting the best out of them
Turn the tool, not your wrist. The bend gives you an extra axis to play with. Roll the tweezers in your fingers to bring the tips to the angle you need rather than rotating your whole forearm to get there.
Choke up close to the tips. Holding halfway down gives you leverage you do not want — small finger movements become large tip movements. Grip near the work for fine control.
Let go slowly. Most parts that vanish are launched on release, not on pick-up. Open the tips gradually rather than letting them spring apart.
Never lever with them. Tweezers hold, they do not prise. Twisting the arms sideways puts the tips permanently out of line, and a bent arm gives you more leverage to do that damage with than a straight one.
Do not drop them. DSPIAE flag this specifically. A bent tip landing on a hard floor takes the impact at the bend, and the damage is often invisible until the tips stop meeting properly.
⚖️ Honest limitations
AT-TZ08 is the same shape and usually cheaper. Carbon fibre tips, anti-static, about £2 less. This is the honest headline limitation of this product and it is stated at the top for a reason.
Not anti-static. Steel tips will hold a charge, and decal film will curl onto them.
The bend angle is not published. DSPIAE give 90° for the Crane Beak and nothing for this. We can tell you it is gentler and set back from the tip; we cannot give you a number.
Nor is the tip shape confirmed. The manufacturer names this model only for its geometry. One retailer describes it as pointed, which fits the pattern of the range, but it is a single source and we are not going to state it as fact.
No published length. DSPIAE give one for two other models in this range and not for this.
Three names for one product. Angled, Elbow and Golden Feather. All the same tool, and not something we can fix — only flag.
Not a holding tool. Tweezers position things; anything needing real clamping force belongs in a vise.
Fine points, not a toy. DSPIAE advise keeping them away from children under 10 and that seems fair.
🚚 Dispatch & delivery
✅ Same-day dispatch on orders placed before 3 PM, Monday to Friday
✅ Sent by Royal Mail 24 Tracked from our unit in Derby — full tracking from our door to yours, no import charges and no customs delays
✅ Packed properly. Tools travel in protective packaging, not a bare envelope
✅ Tell us what you are handling — model kit parts, photo-etch, railway detailing, RC bodyshells, decals — and we will point you at the right one of the eight, including when that is the cheaper anti-static version of this exact shape
Hobby Heaven
By Hobbyists. For Hobbyists.
A family-run UK model and miniature supplier. We use the tools we sell, and we will tell you when something is not right for the job you have described.
