Same-day 1st class shipping: Monday - Friday by 3.30PM (GMT-0).

PRODUCT DESCRIPTION

DSPIAE  |  AT-TZ03
Straight Precision Tweezers
The longest pair in the range, and the cheapest. If you only buy one, buy this one.
⚠️ These are not the anti-static ones, whatever you read elsewhere
Every shop selling any tweezer in this range pastes the same manufacturer text, and that text includes a line about carbon fibre tips that stop decal film curling from static electricity. We have found it word-for-word on UK pages selling this exact model.
It does not apply here. Carbon fibre tips and the anti-static property belong to AT-TZ06, TZ07 and TZ08 only. AT-TZ03 is stainless steel throughout. If decal film curling away from you is the problem you are trying to fix, buy one of those instead — they are usually a little cheaper than the standard models, which is odd but true, and we would rather you spent less and got the right thing.
📌 Why this is the sensible first pair

DSPIAE make eight tweezers and the naming does not help you choose between them. Some are named after the shape of the tip, some after the shape of the body, and nothing tells you which does what. Most people land on one at random.

Here is the part nobody mentions: AT-TZ03 is the longest of them at 135 mm, and it is also the cheapest. The specialist models — the point tip, the blunt tip, the angled pairs — all cost more and all do something narrower. This is the general-purpose one, and if you are not yet sure what your work actually demands, it is the one to start with.

🔧 What 135 mm actually gets you
▪ A softer spring, without you doing anything. Longer arms flex more readily, so the same pressure from your fingers arrives at the tips as a gentler grip. That is the difference between placing a small part and firing it into the carpet, and it is why length is a control feature rather than just a size.
▪ Reach into a part-built model. Thirteen millimetres more than the next model in the range does not sound like much until you are trying to place something down inside a fuselage or between two assembled sub-units without resting your knuckles on wet paint.
▪ Thickened arms, on purpose. DSPIAE call it a thickening design and the reason is stability. Thin springy tweezers flex unpredictably under grip, which is what makes a part shift at the exact moment you are placing it. More material in the arms means the tips go where you put them and stay there.
▪ Arc-formed tips. DSPIAE state this is specifically to stop parts bouncing out when clamped. Anyone who has spent twenty minutes on the floor with a torch looking for a 3 mm aerial will understand why that is worth designing for.
▪ Stainless steel with smooth gripping faces. Nothing textured to press an impression into soft plastic, and no rust in a cold hobby room over winter. The inner faces are finished smooth rather than serrated.
🤔 Which of the eight do you need?
AT-TZ01Point tip — reaching into recesses for something minute
AT-TZ02Flat / blunt tip, 122 mm — painted parts and wet decals without marking them
AT-TZ03This one. Straight, 135 mm — the longest and the cheapest. General handling
AT-TZ0490° angled — working directly down onto a surface
AT-TZ05Angled — reaching over a build without your hand in the way
AT-TZ06 / 07 / 08Anti-static, carbon fibre tips — blunt, pointed and angled. These are the decal-static ones
Straight answer: buy this one if you do not already know what you need — it is the cheapest of the eight and the most generally useful, and using it for a few months will tell you far more about what your second pair should be than any comparison chart will. If you already know the answer, buy the answer: point tip for recesses, flat tip for decals and painted parts, angled for reaching over a build, anti-static for static. We would rather sell you the right £8 tool once than the wrong one twice.
📦 What's in the box
✔ 1 × DSPIAE AT-TZ03 straight precision tweezers
✘ No other models from the range — each AT-TZ is a separate product
✘ No carbon fibre tips and no anti-static property
DSPIAE publish no packing list for this model, so we have not listed a protective cap above even though some models in the range have one. If that matters to you, message us before ordering and we will open a box and tell you exactly what is in it.
📏 Specifications
ModelAT-TZ03
Manufacturer's product nameStraight Tweezers
Length135 mm — the longest in the range
Body geometryStraight
MaterialHardened stainless steel, corrosion resistant
Gripping facesSmooth, non-serrated
ArmsThickened for stability under grip
Tip profileArc form, to reduce parts springing out
Anti-staticNo — see AT-TZ06, TZ07, TZ08
EAN6977151540867
Country of manufactureChina
DSPIAE name this model for the shape of its body rather than the shape of its tip, and they publish no tip profile, tip width or net weight for it. We have described what is documented and left the rest out rather than filling the gaps with guesses.
💡 Getting the best out of them
Choke up when you need control. A longer pair gives you the choice: hold near the tips for fine placement, hold further back when you want reach. That flexibility is the main practical benefit of the extra length and most people never use it.
Let go slowly. Most parts that vanish are launched on release rather than on pick-up. Open the tips gradually instead of letting them spring apart.
Grip the part, not the paint. Even smooth faces will mark fresh paint if you clamp hard. Find an edge, a sprue stub or an underside to hold, and squeeze only as much as it takes.
Never lever with them. Tweezers hold, they do not prise. Twisting the arms sideways puts the tips permanently out of line with each other, and misaligned tips never grip properly again.
Do not drop them tip-first. A hard landing on a tiled floor bends the tips out of true, and the damage is often invisible until you start wondering why nothing sits square any more.
⚖️ Honest limitations
Not anti-static. Stated at the top and repeated here, because the wrong text is sitting on competing UK pages for this exact model and it is the mistake this product invites.
Length cuts both ways. 135 mm gives reach and a gentler spring, but it is also more tool to keep steady. For very fine close-in work under magnification, a shorter pair is easier to control, and that is a real reason to look at AT-TZ02 instead.
DSPIAE do not publish a tip profile for this model. They name it for its body, not its tip. We are not going to describe a tip shape we cannot source, so if you need a specific point geometry, AT-TZ01 states one and this does not.
Not a holding tool. Tweezers position things; they do not hold work under load while you file or sand it. That is what a vise is for, and using tweezers that way is how tips go out of alignment.
Alignment is fragile and not repairable at home. Dropped, levered or twisted, the tips stop meeting properly, and everything is quietly worse from then on.
The range's naming is a mess and it is not your fault. Some models are named after the tip, some after the body, and no published chart explains it. The table above is our attempt to fix that; DSPIAE have not.
Fine points, not a toy. Keep them away from young children.
🚚 Dispatch & delivery
✅ Same-day dispatch on orders placed before 3 PM, Monday to Friday
✅ Sent by Royal Mail 24 Tracked from our unit in Derby — full tracking from our door to yours, no import charges and no customs delays
✅ Packed properly. Tools travel in protective packaging, not a bare envelope
✅ Tell us what you are handling — decals, photo-etch, tiny painted parts, work down inside a build — and we will point you at the right one of the eight, including when that is a different model from this
Hobby Heaven
By Hobbyists. For Hobbyists.
A family-run UK model and miniature supplier. We use the tools we sell, and we will tell you when something is not right for the job you have described.

Specifications

  • Brand Dspiae
  • Type Tweezers
  • Number of Pieces 1
  • MPN AT-TZ03
  • Suitable For Scale Models, Gunpla, Miniatures, Airbrushing, Acrylic/Lacquer/En
  • Country of Origin China
  • Colour Red / Black

Welcome to Hobby Heaven!

We're a brand built by passionate hobbyists for hobbyists. Our mission is to support all your creative endeavors, whether you're into modeling, wargaming, crafting, or art. As enthusiasts ourselves, we understand the importance of quality supplies at affordable prices.

Our carefully curated selection of high-quality materials is designed to inspire and empower hobbyists and artists alike. We're particularly proud of our innovative, cost-effective basing system - a game-changer for modelers and wargamers looking for professional results without breaking the bank.

At Hobby Heaven, we're dedicated to providing exceptional customer service and ensuring your creative projects are a success. Our team is always ready to offer advice, share techniques, or help you find the perfect supplies for your next masterpiece.

 

Thank you for choosing us as your trusted partner in creativity. We're excited to be part of your hobby journey!

We accept payment by PayPal and Credit / Debit cards entered on eBay only. You must be registered with PayPal or eBay to buy from us.

 

We primarily use RM24 for shipping, and we can arrange other courier services upon request. For large international shipments, we utilize FedEx. Once your order has been dispatched, you will receive tracking information. For domestic deliveries, the estimated arrival time is usually 1-4 days.

Please ensure that all items are returned in their original condition. Returns are processed within 1-2 business days of receipt. Refunds are issued minus the original shipping cost. All returns are handled in accordance with eBay's policies.

At Hobby Heaven, we strive to provide our customers with the best possible online shopping experience. Our commitment to excellent customer service extends well beyond the delivery of your order.

We encourage you to reach out with any questions or concerns regarding your purchase. The most convenient way to contact us is through the eBay messaging system.

Our dedicated customer service team responds to messages within 24 hours, Monday through Friday, between 8:00 AM and 3:00 PM GMT.

 

Your satisfaction is our top priority. We're here to help and look forward to assisting you!

WHAT OUR CUSTOMERS ARE SAYING ABOUT US

Order delivered on time with no issues spruetwo (244 )
Order delivered on time with no issues tree1243 (2206 )
Order delivered on time with no issues cus_7236 (241 )
Order delivered on time with no issues julma8824 (1 )
Item received. Thanks. handofganesh (228 )