eBay

PRODUCT DESCRIPTION

DSPIAE | AS-25GY PRO

Aluminium Sanding Board — Grey

Two faces. One cuts hard, one finishes smooth — without changing the paper.

🛠️ The second face is the reason to buy it

One side of this board is flat, like any sanding stick. The other is cut with a sawtooth profile, and that changes what the same sheet of sandpaper does.

A flat backing presses the paper against the work across its whole surface. A serrated backing means the paper only touches along the ridges — so the same pressure from your hand is concentrated into a fraction of the contact area, and it bites considerably harder.

In practice, one board does two jobs. Sawtooth side to knock down a heavy sprue gate or level a stubborn seam quickly. Flip it over and use the flat side to bring the same area smooth. Same paper, no swapping sheets, no keeping a coarse board and a fine board on the go at once.

💧 Wet sand it as much as you like

Most sanding sticks are built on a wood, MDF or card core. Wet sand with one and it swells, the glue lets go, and within a few sessions the whole thing has come apart. So people either avoid wet sanding or treat the stick as disposable.

This is aluminium alloy with an anodised, sandblasted finish. It does not absorb water, it does not swell, and it does not corrode. Which matters, because wet sanding is how you get a genuinely smooth surface before primer — the paper stops clogging, the cut stays consistent, and the dust stays out of the air.

📋 The paper fits without cutting

The sanding face is 25 × 75 mm, which is exactly the size of DSPIAE's die-cut self-adhesive sandpaper. Peel, stick, work. No scissors, no crooked edges, no corners lifting five minutes in.

Sandpaper	Grit range
MSP	#180 – #2500 die-cutting adhesive sandpaper
SP-S01	#180 – #800 — coarse set, for shaping and seam removal
SP-S02	#1000 – #2500 — fine set, for finishing before primer

Any self-adhesive sandpaper works if you cut it to size — the DSPIAE sets are simply already the right shape.

📦 What's in the box

✔ 1 × AS-25GY PRO aluminium sanding board, grey

✘ No sandpaper — sold separately

This is the board only. It is a carrier designed for self-adhesive sandpaper, which you buy separately. See our other items for compatible sets.

✅ The rest of it

▪ 90 mm handle, shaped for the palm. Long enough to grip properly rather than pinch, which matters over a long session of seam work.

▪ Curved sanding surface. The face is subtly profiled rather than dead flat, which keeps the working contact area small and moving — faster cutting and less tendency to leave a flat spot.

▪ Anodised and sandblasted. Corrosion resistant, and the matte finish does not throw glare back at you under a bench lamp.

▪ Also available in black and red. Same board, different colourway — useful if you want one board per grit and a way to tell them apart at a glance.

📑 Specifications

Brand	DSPIAE
Model	AS-25GY PRO
Product line	Cerberus sanding board series
Colour	Grey
Material	Aluminium alloy, anodised & sandblasted
Sanding area	25 × 75 mm
Handle length	90 mm
Faces	Dual sided — flat and sawtooth
Wet sanding	Yes — will not rust or warp
Sandpaper	Not included

⚖️ Honest limitations

No sandpaper included. The board does nothing on its own. Order abrasive alongside it.

The sawtooth side is aggressive. That is the point — but it is not the face to reach for on a thin, delicate or already-finished part. Use the flat side there.

It is a flat-surface tool. Panels, seams and larger faces. For internal corners and junctions you want an angled board instead.

25 mm is a fair width. Ideal for panels and open areas; too wide for fiddly work between raised details, where a narrow stick suits better.

🚚 Dispatch & delivery

✅ Same-day dispatch on orders placed before 3 PM, Monday to Friday

✅ Sent by Royal Mail 24 Tracked from our unit in Derby — full tracking from our door to yours, no import charges and no customs delays

✅ Packed properly. Tools travel in protective packaging, not a bare envelope

✅ Buying more than one? Message us — we combine postage, and one board per grit is a sensible way to work

Hobby Heaven

By Hobbyists. For Hobbyists.

A family-run UK model and miniature supplier. We use the tools we sell, and we will tell you when something is not right for the job you have described.

DSPIAE | AS-25GY PRO Aluminium Sanding Board — Grey Two faces. One cuts hard, one finishes smooth — without changing the paper. 🛠️ The second face is the reason to buy it One side of this board is flat, like any sanding stick. The other is cut with a sawtooth profile, and that changes what the same sheet of sandpaper does. A flat backing presses the paper against the work across its whole surface. A serrated backing means the paper only touches along the ridges — so the same pressure from your hand is concentrated into a fraction of the contact area, and it bites considerably harder. In practice, one board does two jobs. Sawtooth side to knock down a heavy sprue gate or level a stubborn seam quickly. Flip it over and use the flat side to bring the same area smooth. Same paper, no swapping sheets, no keeping a coarse board and a fine board on the go at once. 💧 Wet sand it as much as you like Most sanding sticks are built on a wood, MDF or card core. Wet sand with one and it swells, the glue lets go, and within a few sessions the whole thing has come apart. So people either avoid wet sanding or treat the stick as disposable. This is aluminium alloy with an anodised, sandblasted finish. It does not absorb water, it does not swell, and it does not corrode. Which matters, because wet sanding is how you get a genuinely smooth surface before primer — the paper stops clogging, the cut stays consistent, and the dust stays out of the air. 📋 The paper fits without cutting The sanding face is 25 × 75 mm, which is exactly the size of DSPIAE's die-cut self-adhesive sandpaper. Peel, stick, work. No scissors, no crooked edges, no corners lifting five minutes in. Sandpaper Grit range MSP#180 – #2500 die-cutting adhesive sandpaper SP-S01#180 – #800 — coarse set, for shaping and seam removal SP-S02#1000 – #2500 — fine set, for finishing before primer Any self-adhesive sandpaper works if you cut it to size — the DSPIAE sets are simply already the right shape. 📦 What's in the box ✔ 1 × AS-25GY PRO aluminium sanding board, grey ✘ No sandpaper — sold separately This is the board only. It is a carrier designed for self-adhesive sandpaper, which you buy separately. See our other items for compatible sets. ✅ The rest of it ▪ 90 mm handle, shaped for the palm. Long enough to grip properly rather than pinch, which matters over a long session of seam work. ▪ Curved sanding surface. The face is subtly profiled rather than dead flat, which keeps the working contact area small and moving — faster cutting and less tendency to leave a flat spot. ▪ Anodised and sandblasted. Corrosion resistant, and the matte finish does not throw glare back at you under a bench lamp. ▪ Also available in black and red. Same board, different colourway — useful if you want one board per grit and a way to tell them apart at a glance. 📑 Specifications BrandDSPIAE ModelAS-25GY PRO Product lineCerberus sanding board series ColourGrey MaterialAluminium alloy, anodised & sandblasted Sanding area25 × 75 mm Handle length90 mm FacesDual sided — flat and sawtooth Wet sandingYes — will not rust or warp SandpaperNot included ⚖️ Honest limitations No sandpaper included. The board does nothing on its own. Order abrasive alongside it. The sawtooth side is aggressive. That is the point — but it is not the face to reach for on a thin, delicate or already-finished part. Use the flat side there. It is a flat-surface tool. Panels, seams and larger faces. For internal corners and junctions you want an angled board instead. 25 mm is a fair width. Ideal for panels and open areas; too wide for fiddly work between raised details, where a narrow stick suits better. 🚚 Dispatch & delivery ✅ Same-day dispatch on orders placed before 3 PM, Monday to Friday ✅ Sent by Royal Mail 24 Tracked from our unit in Derby — full tracking from our door to yours, no import charges and no customs delays ✅ Packed properly. Tools travel in protective packaging, not a bare envelope ✅ Buying more than one? Message us — we combine postage, and one board per grit is a sensible way to work Hobby Heaven By Hobbyists. For Hobbyists. A family-run UK model and miniature supplier. We use the tools we sell, and we will tell you when something is not right for the job you have described.

Specifications

Brand Dspiae
Type Sanding Board / Sanding Stick
Number of Pieces 1
Sanding Area 25 x 75mm
MPN AS-25GY PRO
Suitable For Scale Models, Miniatures, Gunpla, 3D Prints
Country of Origin China
Colour Red / Black

ABOUT US

Welcome to Hobby Heaven!

We're a brand built by passionate hobbyists for hobbyists. Our mission is to support all your creative endeavors, whether you're into modeling, wargaming, crafting, or art. As enthusiasts ourselves, we understand the importance of quality supplies at affordable prices.

Our carefully curated selection of high-quality materials is designed to inspire and empower hobbyists and artists alike. We're particularly proud of our innovative, cost-effective basing system - a game-changer for modelers and wargamers looking for professional results without breaking the bank.

At Hobby Heaven, we're dedicated to providing exceptional customer service and ensuring your creative projects are a success. Our team is always ready to offer advice, share techniques, or help you find the perfect supplies for your next masterpiece.

Thank you for choosing us as your trusted partner in creativity. We're excited to be part of your hobby journey!

PAYMENT

We accept payment by PayPal and Credit / Debit cards entered on eBay only. You must be registered with PayPal or eBay to buy from us.

SHIPPING

We primarily use RM24 for shipping, and we can arrange other courier services upon request. For large international shipments, we utilize FedEx. Once your order has been dispatched, you will receive tracking information. For domestic deliveries, the estimated arrival time is usually 1-4 days.

RETURNS

Please ensure that all items are returned in their original condition. Returns are processed within 1-2 business days of receipt. Refunds are issued minus the original shipping cost. All returns are handled in accordance with eBay's policies.

At Hobby Heaven, we strive to provide our customers with the best possible online shopping experience. Our commitment to excellent customer service extends well beyond the delivery of your order.

We encourage you to reach out with any questions or concerns regarding your purchase. The most convenient way to contact us is through the eBay messaging system.

Our dedicated customer service team responds to messages within 24 hours, Monday through Friday, between 8:00 AM and 3:00 PM GMT.

Your satisfaction is our top priority. We're here to help and look forward to assisting you!

WHAT OUR CUSTOMERS ARE SAYING ABOUT US

Good quality item great value and does what it says	law4427 (257 )
Order delivered on time with no issues	cus_7236 (241 )
Order delivered on time with no issues	cosmos.susse (3424 )
Order delivered on time with no issues	smigg-the-mi (92 )
Order delivered on time with no issues	herin_95 (25 )