This Hantek HT500B is a high?impedance passive oscilloscope probe with switchable 1:1 /10:1 attenuation ratio. Compatible with oscilloscopes equipped with 1 Mohm BNC input.
Product characteristicsAttenuation Ratio: 1:1 / 10:1
Input Capacitance: 1:1?100pf; 10:1?15pf
Compensation range(when terminated into 1 Mohm): 15pf?40pf
Input Resistance: 1:1?1MΩ, 10:1?10MΩ
Maximum Input Voltage: 1:1?150V rms CAT II; 10:1?300V rms CAT II
Bandwidth: 1:1?6 MHz; 10:1?500 MHz
Probe Body: 95mm
Cable Length: 1200mm
Weight: 55g
Operating Temperature: -10 °C to +55 °C
Non?operating Temperature: -40 °C to +70 °C
Operating Altitude: 3000 m (9,842 ft)
Non?operating Altitude: 12200 m (40,026 ft)
Humidity: 5% to 95% RH up to 30 °C (Operating); 5% to 65% RH above 30 °C up to 55 °C
Note
1.The probe cable is a sensitive part, please avoid excessive bending or pulling to prevent cable damage.
2.Avoid mechanical shocks to ensure accurate measurement performance.
3.Stop using the probe if red wear indicator inside the cable becomes visible.
4.For cleaning: disconnect probe from instrument, clean with mild detergent and water. Ensure fully dry before re?connection.
5.Hantek HT500B passive high impedance probe, works for Hantek and other oscilloscopes with 1 Mohm BNC input.
6.The BNC connector has pin?hole without inner pin, it is original design, not product defect.
7.This probe is calibrated for instruments with 1M Ω parallel 20pF input; it can be recalibrated for devices with input capacitance 15?40pF.
Packing List
1 × Passive Probe
1 × Ground Spring
1 × Ground Lead
1 × Adjustment Tool
1 × Hook Tip
1 × Protective Cap
Channel Identification rings: two rings per color
Warning
1.Probe tips and accessories are sharp, please handle carefully to prevent injury.
2.Only use with grounded instruments. Never connect ground lead to non?earth potential. Ensure oscilloscope and probe are well grounded.
3.Connect probe to oscilloscope and attach ground lead to earth ground before testing circuit.
4.Disconnect probe input and ground lead from test circuit before unplugging probe from oscilloscope.
5.For indoor use only. Do not work under wet or damp environment, keep unit dry and clean.
6.Do not operate in explosive atmosphere.
Shipping policy
1. We will send out your order within 3 working days, the tracking number will be updated to you once your order has been shipped.
Standard shipping will take 8?12 business days for delivery and expedited shipping takes 2?7 business days. If there is any delay, it may be caused by bad weather or custom inspection which is not in our control, but don't worry, we will keep to follow your order until final delivered.
2. We try our best to make you get desired products as soon as possible. In case you receive wrong products, please contact us timely for exchange or refund. If damaged, please refuse to sign and send us the message ASAP.
3. Shipping cost does not include DHL/FedEx /UPS Remote area service charge , buyer will afford USD45 if your address belongs to it ,we will contact you after receive your order.
Warranty&Return Policy:
1. Please contact us through eBay messages if you have any questions or comments regarding our products function or listing questions.
2. A 1 year warranty is offered for this product.If the product malfunctioned under proper usage per instructions manual within the warranty period, please contact us to obtain shipping instructions and send it back at your shipping costs.
Import Taxes or Duties
1. Import duties, taxes and other charges happened in your side are not included in the item price. These fees not included in our price.
2. Please check with your country's importing policy about the duties and charges before purchase.
Feedback
1. As your feedback is very important to our development, we sincerely invite you to leave positive feedback for us if you are satisfied with our product and service.
2. Please contact us before you leave a neutral or negative feedback, we will try our best to solve the problems.