UNI-T UT208B 1000A True RMS Clamp Meter NCV AC DC Current Tester Temp LCD
Product Overview
The UNI-T UT208B is a professional-grade 6000-count digital clamp meter featuring automatic ranging, a large LCD display, True RMS measurement, and built-in NCV (Non-Contact Voltage) detection. It is designed for electricians, HVAC technicians, and industrial maintenance professionals who need accurate and reliable measurements in demanding electrical environments.
The UT208B complies with CAT III 1000V / CAT IV 600V safety standards and is certified by CE, UKCA, and ETL. It features a LoZ mode to eliminate "ghost voltage," a LPF-ACV function for measuring inverter and VFD voltages, and an inrush current mode for capturing transient currents. The device also supports high-precision temperature measurement with 0.1°C resolution and is compatible with a flexible current probe (optional UT-CS09D accessory) to expand AC current measurement range up to 3000A.
Please note: The instrument is powered by 2 × 1.5V AA batteries (included).
Key Features
-
True RMS Measurement – Accurately measures non-linear loads in inverter and VFD circuits, delivering reliable readings for complex waveforms.
-
1000A AC/DC Current Measurement – Measures up to 1000A AC/DC with high precision, suitable for a wide range of electrical testing applications.
-
NCV Detection – Non-Contact Voltage detection with multi-segment display and audible/visual alarm for quick and safe voltage presence identification.
-
LoZ Mode – Eliminates ghost voltage to ensure accurate voltage readings in circuits where phantom voltages are common.
-
Inrush Current Capture – Captures starting current surges for motor and equipment troubleshooting.
-
Temperature Measurement – High-precision temperature measurement with 0.1°C resolution, ranging from -40°C to 1000°C.
-
Large LCD Display – 6000-count display with backlight and built-in flashlight for easy reading in dimly lit environments.
-
Flexible Current Probe Compatibility – Expand AC current measurement range up to 3000A with optional UT-CS09D flexible current probe.
-
Auto/Manual Ranging – Convenient automatic range selection with manual override for professional control.
-
Data Hold & MAX/MIN – Freezes readings on screen and records maximum/minimum values for trend analysis.
-
Suitable for CAT III 1000V / CAT IV 600V – Meets high safety standards for use in distribution systems and primary supply lines.
-
Flashlight Function – Built-in LED flashlight with dedicated control button for hands-free illumination in dark work environments.
Technical Specifications
-
Brand/Model: UNI-T UT208B
-
Display Count: 6000 counts
-
AC/DC Current: 1000A
-
AC/DC Voltage: 1000V
-
Resistance Range: Up to 66MΩ
-
Capacitance Range: Up to 66mF
-
Frequency Range: Up to 66MHz
-
Temperature Range: -40°C ~ 1000°C (0.1°C resolution)
-
True RMS: Yes
-
NCV Detection: Yes
-
LoZ Mode: Yes
-
Inrush Current: Yes
-
LPF-ACV: Yes
-
Clamp Jaw Opening: 55mm
-
Safety Rating: CAT III 1000V / CAT IV 600V
-
Certifications: CE, UKCA, ETL
-
Power Supply: 2 × 1.5V AA batteries (included)
-
Display: Large LCD with backlight
-
Flashlight: Built-in LED
-
Product Dimensions: 267 × 101 × 47mm
-
Product Weight: Approx. 560g (including batteries)
Package Contents
-
1 × UNI-T UT208B Clamp Meter
-
1 × Test Leads (Red + Black)
-
1 × K-Type Thermocouple
-
1 × Carrying Case
-
1 × User Manual
-
2 × 1.5V AA Batteries
Please note: The optional UT-CS09D flexible current probe is NOT included and is available separately.
Shipping Policy
Orders are processed and shipped within 1-2 business days after payment confirmation. We strive to get your order to you as quickly as possible.
Shipping Methods:
-
Standard Shipping: Dispatched via SpeedPAK or other eBay-approved shipping services.
-
Expedited/International Shipping: Delivered via FedEx, DHL, TNT, or EMS.
-
To USA: 3-6 business days
-
To other countries: 4-8 business days (subject to courier and customs clearance)
Please note: International delivery times may vary depending on the courier company and local customs processing.
Import duties, taxes, and customs fees are not included in the item price or shipping charges. Please check your local importing policy before purchase. These costs are the buyer's responsibility.
Warranty & Return Policy
We value your satisfaction and encourage all customers to communicate with us through eBay Messages. If you have any questions or comments regarding our products or listings, we are here to help.
This product comes with a 1-year warranty against manufacturing defects. If the product malfunctions under proper usage following the instruction manual during the warranty period, please contact us to obtain shipping instructions and return it at your shipping cost.
Upon receiving the returned item, we will conduct a 30-day evaluation and inspection. If the issue is confirmed to be covered under warranty, we will send you a brand new replacement unit at our shipping cost.
Important Notes
-
Safety Warning: Do NOT measure energized circuits without proper training and protective equipment. Always follow local safety regulations.
-
NCV Detection: The NCV function is for reference only. Do not rely solely on NCV for determining the presence or absence of voltage.
-
Flex Probe Compatibility: The UT-CS09D flexible current probe is optional. Please ensure the accessory is properly connected and selected before measurement.
-
LoZ Mode: Use LoZ mode to eliminate ghost voltage readings. The low input impedance helps discharge residual voltages in the circuit.
-
Inrush Current: Inrush current measurement captures the initial current surge. Ensure the clamp is properly positioned before powering on the load.
-
Battery Maintenance: When the low battery symbol appears, replace the 2 × AA batteries in time to ensure accurate readings.
-
Safety Reminder: Please read the user manual carefully before first use. Do not place or store the Meter in environments with high temperature/humidity, dew, or direct sunlight. Keep the Meter and test leads clean. Do not drop the Meter.
True RMS Measurement – Accurately measures non-linear loads in inverter and VFD circuits, delivering reliable readings for complex waveforms.
1000A AC/DC Current Measurement – Measures up to 1000A AC/DC with high precision, suitable for a wide range of electrical testing applications.
NCV Detection – Non-Contact Voltage detection with multi-segment display and audible/visual alarm for quick and safe voltage presence identification.
LoZ Mode – Eliminates ghost voltage to ensure accurate voltage readings in circuits where phantom voltages are common.
Inrush Current Capture – Captures starting current surges for motor and equipment troubleshooting.
Temperature Measurement – High-precision temperature measurement with 0.1°C resolution, ranging from -40°C to 1000°C.
Large LCD Display – 6000-count display with backlight and built-in flashlight for easy reading in dimly lit environments.
Flexible Current Probe Compatibility – Expand AC current measurement range up to 3000A with optional UT-CS09D flexible current probe.
Auto/Manual Ranging – Convenient automatic range selection with manual override for professional control.
Data Hold & MAX/MIN – Freezes readings on screen and records maximum/minimum values for trend analysis.
Suitable for CAT III 1000V / CAT IV 600V – Meets high safety standards for use in distribution systems and primary supply lines.
Flashlight Function – Built-in LED flashlight with dedicated control button for hands-free illumination in dark work environments.
Brand/Model: UNI-T UT208B
Display Count: 6000 counts
AC/DC Current: 1000A
AC/DC Voltage: 1000V
Resistance Range: Up to 66MΩ
Capacitance Range: Up to 66mF
Frequency Range: Up to 66MHz
Temperature Range: -40°C ~ 1000°C (0.1°C resolution)
True RMS: Yes
NCV Detection: Yes
LoZ Mode: Yes
Inrush Current: Yes
LPF-ACV: Yes
Clamp Jaw Opening: 55mm
Safety Rating: CAT III 1000V / CAT IV 600V
Certifications: CE, UKCA, ETL
Power Supply: 2 × 1.5V AA batteries (included)
Display: Large LCD with backlight
Flashlight: Built-in LED
Product Dimensions: 267 × 101 × 47mm
Product Weight: Approx. 560g (including batteries)
1 × UNI-T UT208B Clamp Meter
1 × Test Leads (Red + Black)
1 × K-Type Thermocouple
1 × Carrying Case
1 × User Manual
2 × 1.5V AA Batteries
Standard Shipping: Dispatched via SpeedPAK or other eBay-approved shipping services.
Expedited/International Shipping: Delivered via FedEx, DHL, TNT, or EMS.
-
To USA: 3-6 business days
-
To other countries: 4-8 business days (subject to courier and customs clearance)
Safety Warning: Do NOT measure energized circuits without proper training and protective equipment. Always follow local safety regulations.
NCV Detection: The NCV function is for reference only. Do not rely solely on NCV for determining the presence or absence of voltage.
Flex Probe Compatibility: The UT-CS09D flexible current probe is optional. Please ensure the accessory is properly connected and selected before measurement.
LoZ Mode: Use LoZ mode to eliminate ghost voltage readings. The low input impedance helps discharge residual voltages in the circuit.
Inrush Current: Inrush current measurement captures the initial current surge. Ensure the clamp is properly positioned before powering on the load.
Battery Maintenance: When the low battery symbol appears, replace the 2 × AA batteries in time to ensure accurate readings.
Safety Reminder: Please read the user manual carefully before first use. Do not place or store the Meter in environments with high temperature/humidity, dew, or direct sunlight. Keep the Meter and test leads clean. Do not drop the Meter.