• Specifications:
  • Max continuous current: 180 amps @ 12 vdc - 15 amps per connection
  • Max intermittent current: 20 amps per connection (less than 1 minute)
  • Max voltage: 48vdc
  • 12 connection points, #8-32 stainless steel screws
  • 1/4" stainless steel terminal post
  • Stainless steel hex nuts and lock washer
  • Base Material: Glass-Filled Nylon (Red & Black)
  • Mounting screws: #10 (not included)
  • Length and width: 5-5/16" x 1-1/8" (135mm x 30mm)
  •  
  • Features:
  • *Ideal for Automotive, Solar and Marine Use

    • NEW 12 Point Busbar Bus Bar Power Block Distribution 180A 12V DC Pair Black Red

    Specifications:

    Max continuous current: 180 amps @ 12 vdc - 15 amps per connection

    Max intermittent current: 20 amps per connection (less than 1 minute)

    Max voltage: 48vdc

    12 connection points, #8-32 stainless steel screws

    1/4" stainless steel terminal post

    Stainless steel hex nuts and lock washer

    Base Material: Glass-Filled Nylon (Red & Black)

    Mounting screws: #10 (not included)

    Length and width: 5-5/16" x 1-1/8" (135mm x 30mm)

     

    Features:

    *Ideal for Automotive, Solar and Marine Use

    These busbar blocks have a max continuous rating of 180 amps.  Each connection is rated for 15 amps continuously with a max intermittent rating of 20 amps.  Max voltage of 48VDC.  Ideal for automotive, car audio, solar, and marine use.

    *Red and Black Connectors

    With these 2 packs of 12 terminal power distribution blocks, you will have plenty of connection points for both positive and negative wiring terminals Wire up to a dozen accessories with these 2 packs of power distribution bus bars.

    *Anti-Corrosive & Even Consistent Flow 

    Our bus bars are anti-corrosive and constructed to handle high currents.  The base material is glass filled nylon and a 1/4” stainless steel hex nut and lock washer. It includes a cover and a terminal boot to insulate and protect connections for damage and corrosion.

    *Keep Your Wires Neatly Organized

    With these power distribution blocks, you can finally organize your wiring, so it doesn't look like a rat’s nest under the hood.  Use our power distribution bars for your car, truck, RV, boat, Yacht, Solar systems, and any other cable combination.

    *Stable Performance

    The power distribution block with stable performance provides a better shopping experience for our customers.

     

    Packaging include:

    12 Terminal Power Distribution Block*2  

    Wire Lugs*2


    Item Specifics
    Mounting screws :10 (not included)
    Max continuous current :180 amps @ 12 vdc - 15 amps per connection
    Warranty :1 Year
    Brand :AUXITO
    MPN :Does Not Apply
    Custom Bundle :Yes
    Bundle Description :12 Terminal Power Distribution Block*2 Wire Lugs*2
    Max intermittent current :20 amps per connection (less than 1 minute)
    Max voltage :48vdc
    12 connection points :8-32 stainless steel screws
    Applicable Regions :1/4" stainless steel terminal post
    Base Material :Glass-Filled Nylon (Red & Black)
    Length and width :5-5/16" x 1-1/8" (135mm x 30mm)

    Payment

    1. We only accept PayPal payment, should be received within 3 days from the date of purchase.

    2. Please keep the consistency of Paypal address and ebay address.

    3. Payment should be made within 4 days once you won a item ,or ebay will launch Unpaid Reminder agaist you and there will be bad record on your ebay account .

    Shipping

    All items will be shipped in 24 hours after receiving your payment .

    Returns

    1. We offer 30 days return policy. Please contact us within 30 days t from the date you receive your order if you have any issues with the product or want return .Refund will be send after we got your resend package.

    2. All returned items should be in the original packaging , return tracking information should be provided .

    3. Buyer is responsible for return shipping cost due to the problem not caused by item quality itself.

    Contact Us

    1. Negative feedback will not help resolve any problems you have, please contact us via eBay messages before leaving negative feedback, our customer service will make best effort to help you with the issues.

    2. We maintain high standards of excellenceand strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.

    About Us

    Our office hours are MONDAY - Saturday 9:00PM - 6:00PM PST, but we will response you once we get your message .There will be some delay on respons if you send message or E-Mail on Sundy.

    Store Category
     Store Home
     Headlight LED BULB
     Signal LED light
     Other
    Hot Item
    NEW 12 Point Busbar Bus Bar Power Block Distribution 180A 12V DC Pair Black Red

    Specifications:

    Max continuous current: 180 amps @ 12 vdc - 15 amps per connection

    Max intermittent current: 20 amps per connection (less than 1 minute)

    Max voltage: 48vdc

    12 connection points, #8-32 stainless steel screws

    1/4" stainless steel terminal post

    Stainless steel hex nuts and lock washer

    Base Material: Glass-Filled Nylon (Red & Black)

    Mounting screws: #10 (not included)

    Length and width: 5-5/16" x 1-1/8" (135mm x 30mm)

     

    Features:

    *Ideal for Automotive, Solar and Marine Use

    These busbar blocks have a max continuous rating of 180 amps.  Each connection is rated for 15 amps continuously with a max intermittent rating of 20 amps.  Max voltage of 48VDC.  Ideal for automotive, car audio, solar, and marine use.

    *Red and Black Connectors

    With these 2 packs of 12 terminal power distribution blocks, you will have plenty of connection points for both positive and negative wiring terminals Wire up to a dozen accessories with these 2 packs of power distribution bus bars.

    *Anti-Corrosive & Even Consistent Flow 

    Our bus bars are anti-corrosive and constructed to handle high currents.  The base material is glass filled nylon and a 1/4” stainless steel hex nut and lock washer. It includes a cover and a terminal boot to insulate and protect connections for damage and corrosion.

    *Keep Your Wires Neatly Organized

    With these power distribution blocks, you can finally organize your wiring, so it doesn't look like a rat’s nest under the hood.  Use our power distribution bars for your car, truck, RV, boat, Yacht, Solar systems, and any other cable combination.

    *Stable Performance

    The power distribution block with stable performance provides a better shopping experience for our customers.

     

    Packaging include:

    12 Terminal Power Distribution Block*2  

    Wire Lugs*2


    Item Specifics
    Mounting screws :10 (not included)
    Max continuous current :180 amps @ 12 vdc - 15 amps per connection
    Warranty :1 Year
    Brand :AUXITO
    MPN :Does Not Apply
    Custom Bundle :Yes
    Bundle Description :12 Terminal Power Distribution Block*2 Wire Lugs*2
    Max intermittent current :20 amps per connection (less than 1 minute)
    Max voltage :48vdc
    12 connection points :8-32 stainless steel screws
    Applicable Regions :1/4" stainless steel terminal post
    Base Material :Glass-Filled Nylon (Red & Black)
    Length and width :5-5/16" x 1-1/8" (135mm x 30mm)

    1. We only accept PayPal payment, should be received within 3 days from the date of purchase.

    2. Please keep the consistency of Paypal address and ebay address.

    3. Payment should be made within 4 days once you won a item ,or ebay will launch Unpaid Reminder agaist you and there will be bad record on your ebay account .

    All items will be shipped in 24 hours after receiving your payment .

    1. We offer 30 days return policy. Please contact us within 30 days t from the date you receive your order if you have any issues with the product or want return .Refund will be send after we got your resend package.

    2. All returned items should be in the original packaging , return tracking information should be provided .

    3. Buyer is responsible for return shipping cost due to the problem not caused by item quality itself.

    1. Negative feedback will not help resolve any problems you have, please contact us via eBay messages before leaving negative feedback, our customer service will make best effort to help you with the issues.

    2. We maintain high standards of excellenceand strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.

    Our office hours are MONDAY - Saturday 9:00PM - 6:00PM PST, but we will response you once we get your message .There will be some delay on respons if you send message or E-Mail on Sundy.


    All rights reserved.

    On Aug 4, 2026 at 10:45:30 PDT, seller added the following information:

    Datacaciques